backtop


Print 122 comment(s) - last by murphyslabrat.. on Dec 22 at 1:05 PM

AMD plans to keep "Brisbane" around, releases new chips based on it

Things at AMD may have gone from bad to worse with the lackluster Phenom launch in late November.  Not only did Phenom fail to appeal to professional reviewers, but the company ended up removing one third of its CPU lineup just after the big day.

Last week AMD CEO Hector Ruiz vowed that the company would stop hemorrhaging cash and return to profitability soon.  "That is our number one goal right now," Ruiz said in a conference in Bangalore

Making a profit at AMD apparently means refocusing on its older K8 architecture.  The company will introduce eleven 65nm K8 processors over the next two quarters.  By comparison: AMD launched two quad-core K10 Phenom processors in November with three more scheduled over the next two quarters.  Two tri-core Phenom processors will follow in March 2008.

Essentially, AMD will move any remaining Athlon 64 processors from the 90nm node to the 65nm node, with a few new frequency and TDP variations.

The AMD Athlon 64 X2 5600+ will be the first to jump on the new 65nm K8 bandwagon with a 65W TDP. The previous Windsor-based chip of the same featured an 89-Watt TDP. AMD will also add 100 MHz to the core frequency of the Athlon 64 X2 5600+, now rated at 2.9 GHz. Total L2 cache will be halved in the move to the Brisbane core, and the updated Athlon 64 X2 5600+ chips will feature only 1MB of L2 cache. Availability of these processors is scheduled for Q1 2008.

AMD's higher-end Athlon 64 X2 6400+ and Athlon 64 X2 6000+ will both be discontinued.

AMD will also update its "Energy Efficient" series and will release three new chips, the AMD Athlon 4850e, Athlon 4450e, and Athlon 4050e in Q2 2008. All of the new offerings will be based on AMD's Brisbane core and will feature a 45-Watt thermal envelope. AMD's current energy efficient "BE-2xxx" series will be phased out at that time. Respectively, the new chips will run at 2.5GHz, 2.3GHz and 2.1GHz.

All new Brisbane chips will be based on the Socket AM2 interface.  These processors are compatible with AMD's AM2+ socket designated for Phenom processors.


Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Goodbye AMD
By StevoLincolnite on 12/6/2007 10:49:03 AM , Rating: 2
The Tualatin was actually very poor at clock speed ramping, it was more of a test of the new process node that would eventually be used for the Pentium 4 Northwood, the Willamatte still used the same fabrication nodes as the Pentium 3 coppermine, the other notable thing is, that the Celeron Tualatin actually performed about the same as the Coppermine clock for clock (Even while it had a 33% advantage in bandwidth).

Besides the Pentim 4 wasn't all that bad, think of it like this.
Intel Used the Pentium 3 Tualatin, Retrofitted it with the Pentium 4's Front side bus, Advanced tree predictor, Doubled/Quadrupled the cache and made it more energy efficient, and extended/improved the pipeline and called it a Pentium M, which is what our new beloved Core 2 Duo's are all based on, which clock for clock slaughtered the Pentium 4.


RE: Goodbye AMD
By murphyslabrat on 12/22/2007 1:05:03 PM , Rating: 2
quote:
the Celeron Tualatin actually performed about the same as the Coppermine clock for clock

Yes, while it had one half to one quarter of the L2 cache. If anything, that's a testament to the versatility of the P6 core.

And why couldn't Intel have done all of that whithout the Pentium 4?


"So if you want to save the planet, feel free to drive your Hummer. Just avoid the drive thru line at McDonalds." -- Michael Asher

Related Articles













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki