Print 48 comment(s) - last by afkrotch.. on Nov 18 at 8:31 AM

AMD Socket AM3 reference design overview.   (Source: ChileHardware, AMD)
As AMD looks forward at DDR3 implementations, motherboard manufacturers begin rolling out designs

Reference plans for motherboards based on AMD's desktop AM3 processors are already starting to mature. Socket AM3 is the successor to AMD's Socket AM2+, and is not expected to make an official release until 2008.

Current AMD guidance suggests its AM3 processors will be compatible with existing chipsets. AM2 processors, however, will not be compatible with AM3 motherboards. This same guidance claims AM3 processors will work with AM2+ motherboards.

The initial reference boards that support AM3 processors will be based on an AMD RS780 northbridge and an AMD SB700 southbridge. The northbridge and southbridge communicate with each other via a 4X PCIe lane. The northbridge communicates directly with the CPU using a HyperTransport link.

The RS780-based AM3 reference boards will feature 12 USB 2.0 ports along with 6 SATA II ports. For audiophiles the board also features integrated AZALIA HD Audio.

Also making its appearance for the first with AM3 will be DDR3 memory support. Since AMD places its memory controllers directly on its processors, the DDR3 DIMM slots will communicate directly with the processor using a 128-bit bus. According to current AMD reference posted at ChileHardware, there will be a total of four DIMM slots. 

AMD has not publically announced DDR3 support for its Phenom or Barcelona family processors.  Previous roadmaps indicate that DDR3 support will likely come with its 45nm shrink next year, but the company has also confirmed DDR3 will be present on the Bulldozer CPU architecture.

The RS780 AM3 chipset will also come with integrated graphics. The AM3 reference boards will feature a VGA and HDMI connection, along with a TV-out composite cable that features S-Video along with HD TV-Out.  This is only a reference design, so there is no guarantee these features will pan out in production products.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Why the need for ANOTHER AMD socket???
By mindless1 on 11/12/2007 6:16:15 PM , Rating: 2
So if I wanted to move to DDR3, I can simply buy DDR3 and a new motherboard. I can reuse my old proc.

Intel's old motherboards may not support the future, but their new motherboards can support the past.

There is no good reason to want to move to DDR3. The processor is the more cost effective and higher performance ceiling part to replace, as well as bus, HDD, video bottlenecks. On the contrary now is the time to buy a boatload of DDR2 memory given how cheap it has become, not throwing out DDR2 to pay a premium for DDR3. There just aren't many uses where memory bandwidth matters without concern for the rest of the system particularly the processor.

That old motherboards don't support the future but new do is exactly opposite of our needs since nobody buys a new board to run an old CPU but many want the large performance increase of being able to run a new CPU in an older board, especially the convenience of not having to mess with the (Windows) OS installation caused by switching boards.

By afkrotch on 11/18/2007 7:35:34 AM , Rating: 2 no one bought a new AMD board to get PCIe, while reusing their old processor? Intel didn't give you such an option. You had to get a new processor and memory to get PCIe, cept for those very few boards that supported PCIe and Socket 478 procs.

There are also many reasons to upgraded to a new board, not just because of performance. How about going from mATX to ATX? Old motherboard only has 2 memory slots?

I personally upgraded my server to a new motherboard, while sticking with the old processor. Why? It had a 3.06 ghz P4 in it, but it was using Rambus (fastest memory for P4s during the time). I moved it off the old Asus P4T533 to an Asus P4P800-E Deluxe. Went from 1 gig of memory to 2 gigs for less cost than buying more Rambus.

There are times where getting a new motherboard isn't all about getting a new processor. It could be about getting new features. I'd like to move off my Asus P5W DH Deluxe, just because it's not a capless design. I really do not want to go through the hassle of having my rig down for a few days, while I replace caps. Had to do that with my old Abit IC7-Max 3.

"It seems as though my state-funded math degree has failed me. Let the lashings commence." -- DailyTech Editor-in-Chief Kristopher Kubicki
Related Articles
Pricing Phenom: AMD's 2.4 GHz Almost Here
November 6, 2007, 7:54 AM
More AMD RS780 Details Revealed
July 30, 2007, 3:58 PM
Bulldozing the Competition in 2009
July 26, 2007, 4:11 PM
AMD Unveils "Barcelona" Architecture
September 7, 2007, 3:03 PM

Most Popular ArticlesSmartphone Screen Protectors – What To Look For
September 21, 2016, 9:33 AM
UN Meeting to Tackle Antimicrobial Resistance
September 21, 2016, 9:52 AM
Walmart may get "Robot Shopping Carts?"
September 17, 2016, 6:01 AM
5 Cases for iPhone 7 and 7 iPhone Plus
September 18, 2016, 10:08 AM
Update: Problem-Free Galaxy Note7s CPSC Approved
September 22, 2016, 5:30 AM

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki