Print 68 comment(s) - last by ajalbetjr.. on Oct 2 at 8:19 PM

No, it still isn't a special edition Mercedes

With Barcelona finally launched, the enthusiast community eagerly awaits the launch of AMD's Phenom desktop processors. A large gap, however, still remains between now and then, and what better way to fill that gap than with a new AMD Athlon 64 product?

Today AMD silent-launched its Athlon 64 X2 5000+ "Black Edition." The Athlon 64 X2 5000+ is AMD’s second processor offered under the Black Edition moniker; the first being the AMD Athlon 64 X2 6400+.

In reality, the Athlon 64 X2 5000+ can hardly be considered a completely new product. It still features the same 2.6GHz clock speed, 1 MB of L2 cache, and 65 Watt TDP. In fact, all technical aspects of the processor are identical to its non-Black Edition counterpart. The only new feature that the Athlon 64 X2 5000+ Black Edition brings to the table is an unlocked multiplier -- allowing overclockers to increase the frequency of the processor without the need to adjust the HyperTransport clock.

It is unmistakable that AMD is attempting to entice enthusiasts and DIY PC builders with the unlocked multiplier. Thus, success of the new product centers on its overclocking performance.

According sources familiar with the new CPUs launch schedule, retail availability of the processors should come later this month, but as of right now no major supplier is selling the new processor.   

AMD guidance sets the MSRP of the Athlon 64 X2 5000+ "Black Edition" at $136 in quantities of 1,000. 

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Awesome
By clovell on 10/1/2007 11:02:36 AM , Rating: 2
When I first built, my CPU would max out at 2745 MHz stable. That's dropping the memory speed as low as I could using a divider with HT bus set to 305 and a 9x multiplier. I scaled it back to 2700 MHz for good measure, and it was stable for awhile. I can't remember exactly what did it, but I started getting some instability, so I backed off the OC a bit and came down to 2400MHz.

And that was fine, stable - great. But then I add another 2x1 GB of memory (same kind as the 2x512 MB I already had), and I start getting some stability issues that I can only get past by setting everything to auto. Which is weird, because if I lock in the stock settings, I still get some problems.

I may experiment with different BIOS revisions; I think that's what caused me to have to scale back from 2.7 to 2.4 GHz.

"The whole principle [of censorship] is wrong. It's like demanding that grown men live on skim milk because the baby can't have steak." -- Robert Heinlein
Related Articles

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki