backtop


Print 93 comment(s) - last by jazkat.. on Jun 28 at 10:35 PM


Cinebench ran AMD "Barcelona" 1.6 GHz in 27 seconds. (Source: DailyTech, Anh Huynh)

Cinebench ran Xeon X3220 2.4 GHz in 17 seconds. (Source: DailyTech, Anh Huynh)
An early AMD "Barcelona" revision gets its first non-simulated benchmark

Earlier today, AMD announced that it successfully demonstrated Barcelona across the server market.  The company did not publically state how fast the processor was running, the stepping of the processor, the processor thermal envelope or the eventual ship date.

We had the opportunity to benchmark the AMD Barcelona, native quad-core on an early stepping. We only had a few minutes to test the chip, but we were able to run a quick Cinebench before we were instructed to leave.

The AMD benchmark ran on a single-socket, K10 CPU running at 1.6 GHz on NVIDIA's nForce Professional 3400 chipset.  According to the system properties, the AMD system used 4GB of DDR2-667.

The most similar Intel system we could muster up on such short notice was an Intel Xeon 3220.  The Xeon X3220 is clocked at 2.4 GHz, and ran on Intel's Garlow platform (Intel X38).  This system property profile stated the system utilized 4GB of DDR2-800.

Cinebench completed the default benchmark in 27 seconds for the 1.6 GHz K10; 17 seconds for the Intel Xeon X3220.  The Kentsfield Xeon was 58% faster with a 50% higher clock frequency for Cinebench.

Both systems ran Windows 2003 R2, 64-bit.

AMD partner engineers tell DailyTech the chip we tested was the latest revision silicon.  The same engineers claim 2.0 GHz Barcelona chips are making the rounds, with 2.3 GHz already on the desktop and server roadmaps. 

AMD's current guidance suggests a late July announcement for Barcelona.  However, when DailyTech tracked down the individual partners named in AMD's press release, all cited "optimistic September" ship dates for motherboards. 


Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Am I understanding the math correctly?
By hoyanf on 6/7/2007 3:21:36 AM , Rating: 0
Lets do another calculation :-

Xeon X3220 2.4Ghz - Est USD 85+
Mobo - Upgrade X38

Current Opty 1216 2.4Ghz - USD 28+ (Quad ???)
Mobo - Current

1st of all if u hav to use FBDIMM u can only use 4 DIMM's as thats the most optimized config (check on AnandTech review on FBDIMM) compared to AMD anything goes...

Secondly with 4FBDIMM u can power up another cpu as it uses a total of 65W...

Me i'll go for whats reasonable price/ratio in total system instead of Ghz craze...

Think with a total cost of Quad Xeon i might me be able to cough up 8 Dual Opty 1210 for clustering...

So best go with whats good in long term investment rather than Ghz race...


By GlassHouse69 on 6/7/2007 12:34:53 PM , Rating: 2
My only hope is that Kuma dual core has like a 25% speed increase or something like that over am2's of same ghz rating, AND they are like 120 dollars at most to buy. this would make intel's systems to cost 300-500 dollars more to purchase, considering the AMD boards normally run 65-75 dollars for full features and full speed. DDR2 is luckily at a super cheap price at the moment. combine all of that with a more than adequate chip, this will change the market.

gaming is all gfx card so long as you use 1920x1200 displays with "image quality" settings cranked.


"Vista runs on Atom ... It's just no one uses it". -- Intel CEO Paul Otellini

Related Articles













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki