backtop


Print 40 comment(s) - last by ashmatash.. on Jun 21 at 2:10 PM


ASUS P5E3 WS Professional

Biostar TX38D3-A7 Deluxe

DFI LANParty X38-T3R

Gigabyte GA-X38T-DQ6

Intel DX38BT "Bonetrail"

MSI X38 Diamond

Foxconn X38A
Intel's 975X Express gets the "Bearlake" upgrade

Intel will unveil the high-end version of its Bearlake-family next month, the Intel X38 Express. The new Intel X38 Express replaces the 975X Express, which launched over a year ago with Intel’s Presler Netburst processors. The new chipset introduces new features to Intel’s high-end enthusiast and workstation platform such as PCIe 2.0 and DDR3 memory.

New to the Intel X38 Express is support for dual full-speed PCIe 2.0 x16 slots. The dual PCIe 2.0 slots are compatible with AMD’s CrossFire technology for multi-GPU graphics processing. Motherboard manufacturers are also free to equip Intel X38 Express based boards with a third physical PCIe 2.0 x16 for triple-play physics. Due to chipset limitations, the third physical PCIe 2.0 x16 slot has lesser lanes, with most manufacturers opting for four lanes.

DDR3 is the only officially supported memory for the Intel X38 Express. Intel touts DDR3-1333 memory for X38 Express motherboards. The Intel X38 Express also supports DDR3 ECC memory. DDR2 memory support has been removed officially from the X38 Express, however, the memory controller can still function with DDR2, just without Intel validation. The DFI LANParty X38-T2R will pair DDR2 support with the Intel X38 Express chipset.

The Intel X38 Express also supports upcoming Intel Penryn-family dual and quad-core processors with front-side buses up to 1333 MHz. The new Penryn family is Intel’s first 45nm processor family, expected to launch in Q1’2008 for consumer desktops. Desktop Penryn-family Core models will launch in early 2008.

ASUS, Biostar, DFI, Foxconn, Gigabyte, Intel and MSI have X38 Express-based motherboards on display at Computex 2007. ASUS plans to release an X38 Express-based workstation board. The upcoming ASUS P5E3 WS Professional pairs the X38 Express with the ICH9R south bridge. The board supports dual-channel DDR3-1333 memory, with no mention of ECC support. The P5E3 WS Professional does not have a third physical PCIe 2.0 x16 slot. ASUS opted for a vanilla orange PCB with the P5E3 WS Professional.

Biostar is preparing the TX38D3-A7 Deluxe with three PCIe 2.0 x16 slots. Two of the PCIe 2.0 x16 slots operate at full speed while the third slot has four lanes. Biostar also adds one PCIe x1 and two PCI slots into the mix. The TX38D3-A7 also features onboard power and reset buttons for the tweaking-inclined.

DFI has two X38 Express-based models in the pipeline – the LANParty X38-T2R and the X38-T3R. The two models differ in the memory support department. The LANParty X38-T2R supports DDR2-800 memory while the X38-T3R supports DDR3-1333. The upcoming X38-T2R and X38-T3R feature genius BIOS and CMOS Reloaded technologies. New to the LANParty X38-T2R and X38-T3R is the DFI Bernstein 8-channel theater-level audio solution.

Foxconn has the X38A on display with three PCIe 2.0 x16 slots. There are also two PCIe x1 and two PCI slots. The Foxconn X38A supports DDR3 and DDR2 memory on the same board. There are four DDR3 and two DDR2 memory slots. Users can only install DDR2 or DDR3, not both at the same time.

Gigabyte is taking the same route as DFI, with two X38 Express based motherboards – the GA-X38T-DQ6 and GA-X38-DQ6. Both boards have similar feature sets, with the GA-X38T-DQ6 offering DDR3 support while the GA-X38-DQ6 supports DDR2. Gigabyte takes DDR3 further than other manufacturers by claiming support for DDR3-1600 memory. Gigabyte has opted to equip its GA-X38x-DQ6 motherboards with two PCIe 2.0 x16 slots. New to the Gigabyte X38 Express-based motherboards is the Realtek ALC889A high-definition audio codec, offering a 106dB signal-to-noise ratio.

Intel also plans to join in on the X38 Express festivities with the successor to the D975XBX2 BadAxe2. The new DX38BT Bonetrail features three physical PCIe 2.0 x16 slots. The DX38BT is one of the few enthusiast X38 Express motherboards currently on the Computex show floor without an elaborate heat-pipe cooling setup. Instead, Intel sticks with a simple aluminum cooler.

Lastly is MSI with the X38 Diamond. MSI manages to squeeze four physical PCIe 2.0 x16 slots into the X38 Diamond. Two of the PCIe 2.0 x16 slots are full-speed while the other two slots are half-speed. MSI also squeezes in support for DDR2-800 and DDR3-1333 memory on the same board.

Expect Intel to officially launch the X38 Express next month, coinciding with the upcoming Core 2 Duo E6x50-series.


Comments     Threshold


This article is over a month old, voting and posting comments is disabled

Nearing End for LGA775
By EndPCNoise on 6/5/2007 5:10:26 PM , Rating: 2
Is anyone here in the least concerned that Intel is going to a completely new socket in around Q1 2008?




RE: Nearing End for LGA775
By EndPCNoise on 6/5/2007 5:13:44 PM , Rating: 2
CORRECTION: Q1 2009

Sorry


RE: Nearing End for LGA775
By Anh Huynh on 6/5/2007 5:41:43 PM , Rating: 2
Why? LGA775 has been around since 2004 or so.


RE: Nearing End for LGA775
By EndPCNoise on 6/5/2007 6:13:32 PM , Rating: 2
'cause no further CPU upgrades after Penryn.


RE: Nearing End for LGA775
By Christopher1 on 6/5/2007 9:51:25 PM , Rating: 1
I wish that they would just stick with a socket already. Intel has had a bunch of sockets since I first started with a Packard Bell comp back in 1992.

That's the main reason why I didn't buy a new computer until 2000 and my parents did want a new computer until 2003, because the things were changing so fast and they didn't want to get ripped off.

Now that I am A+ Certified however, they don't have to worry about that in the slightest, because I know how to change motherboards.


RE: Nearing End for LGA775
By Runiteshark on 6/5/2007 11:00:48 PM , Rating: 3
Your A+ Certification puts me at ease with your total and otherwise colossal amount of knowledge in replacing motherboards.



RE: Nearing End for LGA775
By ashmatash on 6/21/2007 2:10:58 PM , Rating: 2
Yes, thank heavens for his A+ certification credentials, as that qualification is, in fact, THE defacto emblem of an accomplished and accredited bench monkey! Rest assured, the emotional stresses of mainboard upgrades and the fears of being "ripped off" due to ever changing and evolving processor socket technologies will be put to ease by this procurment of the most rudimentary of technology certifications.


RE: Nearing End for LGA775
By Chaotic42 on 6/14/2007 10:29:36 AM , Rating: 2
How often do you only upgrade your CPU though? Would you really want a Penryn on a motherboard from 2003? They change sockets, memory types, and chipsets to make everything work together well. Motherboards are relatively cheap and an enthusiast wouldn't have any trouble changing everything out.

On the other hand, would you really want to run an old Pentium 4 on an X38 motherboard? If you're springing for DDR3, you're certainly going to want a modern processor. LGA775 or LGA1500, you'd want something that takes advantage of your other components.

My point is that socket backwards-compatability for more than a few years is relatively useless. People who buy Dells and HPs aren't upgrading in droves anymore like they used to. Computers are so cheap that many people can just buy a new one after four years.


"Nowadays, security guys break the Mac every single day. Every single day, they come out with a total exploit, your machine can be taken over totally. I dare anybody to do that once a month on the Windows machine." -- Bill Gates

Related Articles
Gigabyte United Preps DDR3 Motherboards
April 30, 2007, 8:49 PM
PCIe 2.0 Ratified
January 16, 2007, 5:54 AM
Intel "Bearlake" Plans Unveiled
October 17, 2006, 1:24 PM













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki