Print 82 comment(s) - last by Alpha4.. on May 27 at 11:53 PM

Lead-tin interconnects, like the ones seen on this Intel "Prescott" processor, are a thing of the past. (Thumbnail and image source: Chipworks)
Intel is taking the next step in environmentally friendly products

Intel Corporation announced on Tuesday that the future of its microprocessors will be lead-free and environmentally friendly.  This follows a big tech industry shift towards products that are more environmentally friendly.  The shift will begin with its line of "green" 45-nanometer high-k metal gate (Hi-k) processors, which includes the next-generation Intel Core 2 Duo, Core 2 Quad and Xeon processors.

Lead is mainly used in a variety of micro-electric "packages" and "bumps" that attach the Intel chip to "packages", which are then wrapped around the chip and used to connect it to the motherboard.  Package designs include pin grid array, ball grid array, and land grid array, and will all be 100 percent lead-free.

With the introduction of 65nm Yonah, Chipworks -- a company that reverses engineers chip packaging -- discovered that Intel silently transitioned from lead-tin solder-ball interconnects to plated copper pillars. Since then, all 65nm Intel processors no longer use lead for interconnects.

"Intel is taking an aggressive stance toward environmental sustainability, from the elimination of lead and a focus on greater energy efficiency of our products to fewer air emissions and more water and materials recycling," said Nasser Grayeli, Intel vice president and director of assembly test technology development, Technology and Manufacturing Group.

Lead, which can cause neurological damage in humans if ingested, was used in electronics for decades due to its electrical and mechanical properties.  Intel produced its first lead-free flash memory product in 2002, and began shipping products with 95 percent less lead than previous chips in 2004.  The remaining 5 percent was replaced by a tin/silver/copper alloy in the first-level interconnect, the solder joint that connects the silicon die to the package substrate.

In February 2003, the European Union adopted the Restriction of Hazardous Substances Directive. The directive mandated that all electronics sold must be near lead-free by June 2006. Special clauses protected microprocessors from utilizing some lead in their design, but AMD and Intel both opted to go lead free before the call to action date anyway.

Production on the Intel lead-free 45 nanometer high-k processors, codenamed Penryn, will begin in the second half of this year.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: California in my mind .......
By masher2 on 5/23/2007 11:59:42 AM , Rating: 2
All lead-free solders contain copper...all those used in the electronics industry, at least.

RE: California in my mind .......
By Goty on 5/23/2007 12:52:55 PM , Rating: 2
Ah, well thanks for the correction, then.

RE: California in my mind .......
By aos007 on 5/23/2007 12:58:40 PM , Rating: 2
Actually the one I have at home does not. It's made of antimony and tin only. I'm not sure what manufacturing plants use though.

RE: California in my mind .......
By masher2 on 5/23/2007 1:03:53 PM , Rating: 1
SnSb solder is used only for plumbing applications AFAIK. Its not suitable for use in electronics applications.

RE: California in my mind .......
By aos007 on 5/23/2007 1:22:56 PM , Rating: 2
It was sold as electronics solder in a specialized shop though, alongside German-made high end silver solder. In a packaging and diameter typical of electronics soldering. It was made by Chinese so it's entirely possible they purposefully resold plumbing solder as electronics solder. It would certainly explain extreme difficult I had working with it.

RE: California in my mind .......
By stromgald on 5/23/2007 1:53:54 PM , Rating: 2
Antimony is as bad as lead if not worse. Since the focus has been on lead, companies have moved to other materials. Pure tin is also quite toxic. If I were you, I wouldn't use too much of that solder at a time.

By KristopherKubicki on 5/23/2007 1:33:11 PM , Rating: 1
He was correct that lead isn't being used a solder though. At these sizes nothing get soldered, it's all lithography.

"What would I do? I'd shut it down and give the money back to the shareholders." -- Michael Dell, after being asked what to do with Apple Computer in 1997
Related Articles

Most Popular Articles5 Cases for iPhone 7 and 7 iPhone Plus
September 18, 2016, 10:08 AM
No More Turtlenecks - Try Snakables
September 19, 2016, 7:44 AM
ADHD Diagnosis and Treatment in Children: Problem or Paranoia?
September 19, 2016, 5:30 AM
Walmart may get "Robot Shopping Carts?"
September 17, 2016, 6:01 AM
Automaker Porsche may expand range of Panamera Coupe design.
September 18, 2016, 11:00 AM

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki