backtop


Print 91 comment(s) - last by excrucio.. on Jun 1 at 11:12 PM

Even before AMD's 65nm K10 architecture hits store shelves, the company is talking about the 45nm shrink

This summer, AMD will announce its first major architectural change since the introduction of the K8 architecture in 2003.  This new architecture, dubbed K10, will first make an appearance in the server space, with the introduction of the Barcelona-family processors.

K10 features a native quad-core design that incorporates shared-L3 cache, HyperTransport-3 support and backwards functionality with AM2 motherboards.  However, the original K10 desktop and server processors will debut on the 65nm architecture -- a process AMD only started mastering in December 2006 with the launch of the Brisbane desktop CPU family.

In the second half of 2008, AMD will begin to migrate its K10 architecture to the 45nm node.  AMD explicitly mentions that its 45nm process technology utilizes silicon-on-insulator (SOI).  Intel's 45nm process node, slated for introduction later this year, uses conventional CMOS process technology. 

The halo AMD 45nm chip, Deneb FX, shares the same functionality as its 65nm counterpart, Agena.  Both families incorporate native quad-core designs and shared-L3 cache support.  Deneb FX goes one step further, adding support for DDR3 on the integrated memory controller.

However, the bulk of AMD's 45nm quad-core offerings will come with the Deneb (non-FX) family.  AMD suggests Deneb will be the first processor on the new AM3 socket.  Previous AMD documentation indicated that AM2 and AM3 would be forward/backward compatible -- yet AMD engineers claim the AM3 alluded to in 2006 is not the same AM3 referenced in the 2008 launch schedule. 

"At the time AM3 was the likely candidate to become AM2+," claimed one field application engineer familiar with AMD's socket migration. "[AMD] wanted to keep the socket name associated with DDR2 memory and backwards compatibility, but AM3 emphasizes DDR3 support."

After Deneb, and closer to 2009, AMD's guidance states that 45nm Propus and Regor will replace the 65nm Kuma and Rana mid-range productsPropus is very similar to Deneb: 45nm, shared L3 cache, AM3 package.  However, Propus will only feature two cores.  Regor is identical to Propus, but will not include shared-L3 cache support.

AMD's low-end single core Athlon 64 and Sempron appear consolidated with the introduction of the Sargas family.  Sargas is an optical shrink of the 65nm Spica core, with the addition of DDR3 support and AM3 packaging.  AMD's ultra-low end Sparta-family, slated for introduction this year to replace the Manila-family Semprons, has no successor.

AMD product managers are keeping details of their 45nm technology close.  However, this past January AMD and IBM jointly announced plans for high-k, metal gate transistors on future 45nm and 32nm processors. 

This past February, AMD senior vice president of technology development Douglas Grose claimed the company is still anticipating whether or not it will use high-k metal gate technology in later 45nm revisions or if the company will wait until 32nm.

Intel also announced its intention to debut high-k, metal gate technology on its 45nm node, but the company went one step further to confirm this new transistor technique will appear on the Penryn processor.  Intel guidance suggests Penryn will see its first retail availability late this year -- at least a year before Deneb.

Marty Seyer, AMD senior vice president, recently disclosed AMD's 45nm server offering slated for release in 2008.  Seyer stated that Shanghai, the 45nm successor to Barcelona, would feature additional cache and other performance enhancements. 

Seyer or Grose would not comment on what these performance enhancements, though features from AMD's server products typically appear on the desktop components as well.



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Learn to crawl before you can walk
By Oregonian2 on 5/2/2007 2:26:07 PM , Rating: 5
But a lot of Intel's announcements and new processors in the past turned out to be marketing fluff, little more. Useless multithreading and Clocks in the sky doing comparatively little. New bus structures that make things go only a tiny bit faster. Difference is that the Conroe chips actually delivered, and at a low price point. Something very different, IMO, than most of Intel's previous processor introductions. AMD may have been surprised by the fluff actually being true for a change.


By JackPack on 5/2/2007 4:40:02 PM , Rating: 3
No need to make excuses for AMD.

The introduction of the Pentium M in 2003 already proved that Intel could deliver. It was something that could perform on-par with Athlon 64 while being extremely frugal with silicon and power. It was obvious that Intel could bring the Pentium M to the desktop. And AMD's reaction was to expect Intel to continue treading the NetBurst path onto Tejas and beyond?

AMD has much bigger problems if they're assessing Intel's capabilities by just looking at Intel's announcements and marketing.


"Well, we didn't have anyone in line that got shot waiting for our system." -- Nintendo of America Vice President Perrin Kaplan

Related Articles
Intel Unveils "Penryn" Performance
April 17, 2007, 9:11 PM
AMD Talks Details on K10
April 14, 2007, 11:46 AM
Intel Pulls 45nm Xeon Launch Into 2007
February 21, 2007, 1:16 PM
AMD's 45nm Opterons Scheduled for 2008
February 5, 2007, 11:50 AM













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki