The GeForce 7600 and 7300 became readily-available,
affordable video cards almost overnight. A major secret to the success of
these cards was due to the fact that the GPUs were designed to use the old PCB
designs from GeForce 6200 and 6600. Once again, NVIDIA will take
advantage of this mentality again with the next generation G86 and G84
video cards scheduled for release this quarter.
Was it surprising that images of the GeForce 8600 that have been
"leaked" out to the internet look
identical to GeForce 7600s, or for that matter GeForce 6600s? It
shouldn't be, as that was sort of the whole point in making G84 and G86
pin compatible with G73, which was already pin compatible with NV40.
G86 and G84 (G8x family) GPUs do have some major
differences between G73 however. For starters, the main G73 power
rails run at 2.5V -- on the G84/G86 these rails run at 1.2V and
1.8V. The G73 clock generator runs at 1.3V while the G8x family
clock generator runs at 3.3V. Additional dead pins have also been
allocated on the G8x family for higher density memory.
One of the bigger surprises of the G8x family is the support for more than
4 GPUs, at least in the design. It seems pointless to put a low or mid
range GPU into SLI mode when a high-end card can usually produce better
performance at lower cost. However, the G8x family design kit
touts an interface for "more than 4 GPUs." Given the unified
shader architecture of the GeForce 8000 family, it would be pretty safe to say
this additional functionality is probably reserved for some sort of physics
quote: I am glad to see that mid-range cards will do away with 128 bit memory interface.
quote: 8600 Ultra: 64 SP, core 500 MHz, memory 1400 MHz, 512 MB, 256-bit, $179
8600 GT: 48 SP, core 350 MHz, memory 1200 MHz, 256 MB, 128-bit, $149
8300 GT: 32 SP, core 500 MHz, memory 1200 MHz, 256 MB, 128-bit, $99
8300 GS: 24 SP, core 500 MHz, memory 1000 MHz, 256 MB, 128-bit, $79