backtop


Print 68 comment(s) - last by oTAL.. on Jan 8 at 10:11 AM


Kronos cooling run at 8.5kilo-volts to cool a device 25 degrees Celsius - Image courtesy TheFutureofThings.com
Kronos Advanced Technologies claims that's the way we're headed

Lately, heatsinks and traditional fans have become so large that they are beginning to be obstructive and are sometimes too heavy. This is an issue on the graphics processor front in many ways, as there isn't enough room for large heatsinks, yet GPU thermal exceeds that of high-speed CPUs.

A company called Kronos Advanced Technologies is working on a method of removing heat from devices such as CPUs by using ionic discharge to create a fluid motion of air. This technology has been around for a few years and is used in products such as ionic air filters, which have no moving parts but still move volumes of air and create quite a strong breeze. The same concept is being applied to micro processor cooling.

Despite the advancement however, the volume of air moved over the CPU core is still small because the core surface area is small. Heatsinks are used to increase surface area of the hot surface, so that when air is moved over the fins, more heat can transfer to the air. The Kronos' device will attempt to remove hot air away from the processor core directly without the need for heatsinks. With this method, the velocity of air being moved needs to be extremely fast in order to compensate for the lack of surface area -- and speed is something that ionic air "movers" lack.

Right now, Kronos is still working on prototypes, which it claims are scalable from very small micro coolers to large scale sizes. Power requirements also appear to be quite steep at this point in time. One of Kronos' demonstration shows a heated area being reduced from roughly 50C to 25C using an ionic cooler, but the power supply required around 8.5kV, or 8500 volts, to stay stable.


Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Health problems?
By masher2 (blog) on 1/4/2007 4:56:53 PM , Rating: 2
They do create ozone, but typically in very low amounts. Additionally, its fairly simple to add a catalytic screen which converts it back into O2...though I'd imagine this would reduce the cooling ability somewhat.


RE: Health problems?
By Comdrpopnfresh on 1/4/2007 8:32:25 PM , Rating: 2
the air purifiers cam under scrutiny from consumer reports for the amount of ozone they created- higher than government standards allowed. They added the very large, very expensive catalytic converts (catalysts' effectiveness are dependent upon the surface area exposed). A re-evaluation by consumer reports revealed that besides adding a bunch of expense, they didn't reduce the ozone amounts much. So they do add a lot of ozone, and it can't be effectively contained, unless you make a whole case made of the catalyst (even so, I basically made that part up, and doubt it will do much. lol)


"We are going to continue to work with them to make sure they understand the reality of the Internet.  A lot of these people don't have Ph.Ds, and they don't have a degree in computer science." -- RIM co-CEO Michael Lazaridis

Related Articles













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki