backtop


Print 7 comment(s) - last by johnsonx.. on Sep 27 at 8:49 PM

Add DVI to your integrated graphics system

Sapphire has released its new ADD2 card for integrated graphics equipped motherboards and systems. The Sapphire ADD2 card takes advantage of the available PCI Express x16 slot designated for graphics and adds a single-link DVI video output. This is no way a graphics card upgrade but a video output expansion module. Nevertheless the single-link DVI output supports resolutions up to 1600x1200.

With the ADD2 card installed, systems with integrated graphics can simultaneously output to multiple displays using a variety of the onboard and ADD2 video outputs. As this is simply a TMDS transmitter on a low-profile expansion card, it does not require any cooling. Official compatibility is limited to Intel’s 915G Express, 945G Express and ATI RC410 chipsets. Nevertheless this card should work with all motherboards that support ADD2 expansion cards.

US availability is unknown at the moment, though it should arrive quite soon. Pricing hasn’t been set yet, though when asked at IDF, a Sapphire representative gave a ballpark range of around $20 USD, if not less.



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Idiocy
By johnsonx on 9/27/2006 8:49:14 PM , Rating: 2
The idea is that this card goes in the x16 slot that would otherwise be used for an add-in graphics card. See, if you have a graphics card, then you can't use this anyway.


"This week I got an iPhone. This weekend I got four chargers so I can keep it charged everywhere I go and a land line so I can actually make phone calls." -- Facebook CEO Mark Zuckerberg











botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki