backtop


Print 7 comment(s) - last by johnsonx.. on Sep 27 at 8:49 PM

Add DVI to your integrated graphics system

Sapphire has released its new ADD2 card for integrated graphics equipped motherboards and systems. The Sapphire ADD2 card takes advantage of the available PCI Express x16 slot designated for graphics and adds a single-link DVI video output. This is no way a graphics card upgrade but a video output expansion module. Nevertheless the single-link DVI output supports resolutions up to 1600x1200.

With the ADD2 card installed, systems with integrated graphics can simultaneously output to multiple displays using a variety of the onboard and ADD2 video outputs. As this is simply a TMDS transmitter on a low-profile expansion card, it does not require any cooling. Official compatibility is limited to Intel’s 915G Express, 945G Express and ATI RC410 chipsets. Nevertheless this card should work with all motherboards that support ADD2 expansion cards.

US availability is unknown at the moment, though it should arrive quite soon. Pricing hasn’t been set yet, though when asked at IDF, a Sapphire representative gave a ballpark range of around $20 USD, if not less.



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Asrock has done this
By smilingcrow on 9/27/2006 5:05:12 PM , Rating: 2
I have the same ASRock board and was also using the DVI connection at 1680x1050 before I added a discrete graphics card. Being limited to 1600x1200 is just very poor by today’s standards even for an IGP.


"If you look at the last five years, if you look at what major innovations have occurred in computing technology, every single one of them came from AMD. Not a single innovation came from Intel." -- AMD CEO Hector Ruiz in 2007











botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki