backtop


Print 39 comment(s) - last by AnnihilatorX.. on Sep 22 at 7:45 AM

Seagate plans to triple areal densities within two years

At the IDEMA DISKON show in Santa Clara, California, Seagate demonstrated a magnetic recording device with a whopping 421 Gbits per square inch density.  To put that in perspective, the company recently announced 160GB 5400.3 2.5" perpendicular notebook drives that have an areal density of 135 Gbits per square inch. Toshiba, the current commercial density leaders, recently demonstrated 2.5" hard drives with areal densities of 188 Gbits per square inch.

Seagate CEO Bill Watkins claims "Breakthroughs in areal density are enabling the digital revolution and clearly indicate that hard drives can sustain their advantage to meet the world's insatiable demand for storage across a wide range of market segments."

According to the press release put out by Seagate, the company claims a 1.8" disk drive produced on the same 421 Gbits per square inch technology would result in a 275GB hard drive. 2.5" drives on the density would level out around 500GB, and fully fledged 3.5" hard drives would be able to house a density of 2.5 terabytes.  Perhaps even more exciting is that Seagate "anticipates that solutions at these density levels could begin to emerge in 2009."

The leap to such densities would result in a three-fold increase of current areal densities. However, Seagate isn't alone in this race.  Earlier this year Hitachi put out a press release claiming we would see 1TB holographic drives from the company before the end of the year.  However, both companies use Komag as the primary supplier of their high density platters -- and it should not be a surprise if we see 1TB hard disk drives as well.



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

Finally
By dice1111 on 9/15/2006 3:38:15 PM , Rating: 5
One drive that can hold my entire "unmentionable genre movie" collection. I didn't think it was possible. No more seaching for DVD back-ups in the glow of my monitor late at night, finally. I mean, how akward is that!

*Mental pictures for everyone! There on me!




RE: Finally
By jmunjr on 9/15/2006 4:58:20 PM , Rating: 5
The saddest part of this post is the fact the guy is openly bragging about it.


RE: Finally
By bigdaniel on 9/15/06, Rating: 0
RE: Finally
By Jedi2155 on 9/17/2006 10:57:16 PM , Rating: 2
Or maybe a collection suited for < 5 year olds LoL.


RE: Finally
By lewisc on 9/19/2006 4:43:37 PM , Rating: 2
...backed up by the misuse of 'there' instead of 'they're' in his post.


RE: Finally
By Byte on 9/16/2006 12:11:26 AM , Rating: 2
How do you calculate the size of the drive from the Gbit/inch? I'm planning to create a RAID5 array, and I really want some 1TB+ drives.


RE: Finally
By Jedi2155 on 9/17/2006 10:55:36 PM , Rating: 2
From simple deduction I think we can figure out that

1 square inch = 52.625 GBytes (421/8)

So with a known size and areal density, we can find the area on the drives - with Area = Size/Areal Density and use the Area for a future reference.

275 GB 1.8" Drives = 5.225 Square Inches
500 GB 2.5" Drives = 9.501 Square Inches
2500 GB 3.5" Drives = 47.506 Square Inches


RE: Finally
By retrospooty on 9/16/2006 9:45:56 AM , Rating: 2
Too bad by 2009, it will probably grow far larger than 2.5 tb LOL


"I'd be pissed too, but you didn't have to go all Minority Report on his ass!" -- Jon Stewart on police raiding Gizmodo editor Jason Chen's home

Related Articles













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki