Print 64 comment(s) - last by podknocker.. on Aug 24 at 4:34 PM

The first native x86 quad-core processor is finally taped out

With the news of AMD's DDR2 Opteron launch, AMD managed to squeeze in one tidbit of information definitely newsworthy: quad-core Opterons have been taped out. AMD's Executive Vice President Henri Richard had previously dubbed these native quad-core design as the K8L architecture.  Internally at AMD, this architecture is known as Greyhound.

The company's press release claims "AMD plans to deliver to customers in mid-2007 native Quad-Core AMD Opteron processors that incorporate four processor cores on a single die of silicon." For a little historical perspective, AMD's dual-core Opteron was taped out in June 2004, and then officially introduced in late April, 2005.

The press release further adds that the quad-core Opteron will be compatible with the dual-core DDR2 Opteron motherboards.  The news of backwards compatibility with existing DDR2 Opteron motherboards is in line with AMD's previous announcements on its other platforms.  On roadmaps earlier this year the company also claimed that AM3 processors would be compatible with AM2 motherboards.

Intel has recently accelerated its quad-core plans; the company recently announced that quad-core desktop and server chips will be available this year.  Intel's initial quad-core designs are significantly different than AMD's approach.  The quad-core Intel Kentsfield processor is essentially two Conroe dice attached to the same package.  AMD's native quad-core, on the other hand, incorporates all four cores onto the same die.  AMD countered Intel's accelerated roadmap by claiming the new quad-core processors would be demonstrated this year.

However, absent from AMD's quad-core announcement is any news of non-native quad-core processors.  Non-native quad-core Opterons, previously dubbed Deerhound, existed on AMD's roadmap as late as May of this year.  These 65nm processors were essentially two 65nm dual-core Opterons on the same package, but AMD has made virtually no comment on any 65nm dual or single-core processors since the AMD Analyst Day on June 1 of this year.  AMD still plans to introduce 65nm dual-core processors for desktops this year.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

What exactly is Tape Out
By mendocinosummit on 8/15/2006 11:23:51 AM , Rating: 3
Can someone explain tape out to me.

RE: What exactly is Tape Out
By OrSin on 8/15/2006 11:34:43 AM , Rating: 2
Actually working chips,instead of similations.

RE: What exactly is Tape Out
By mendocinosummit on 8/15/2006 11:39:52 AM , Rating: 2
So pretty much Rev A

RE: What exactly is Tape Out
By tofer on 8/15/2006 12:23:29 PM , Rating: 2
Nope. Tape-out means that the physical design is final and can now be used to create the mask or blue print.

RE: What exactly is Tape Out
By Master Kenobi on 8/15/2006 1:20:03 PM , Rating: 2
Yea basically a pre-production blueprint that they can create a litho-print or whatever you wanna call it so they can actually create a chip with it. Still close to a year away from production since they need to finish retooling a few manufacturing lines (I believe this chip is supposed to be 65nm). Then do a few sample runs to test yields and make any tweaks to the process to improve yields or go as is and improve later. I'd say probably late Q1'07 or Early Q2'07. Maybe an April/May release window.

Intel's roadmap is more logical than anything else. They will throw 2 Conroe cores on a die and call it their first Quad core, then 6 months later they are supposed to roll out a "Native Quad Core" and subsequently shrink it down to 45nm. So from Intel Look for 45nm by Q2'07 pending something doesnt hold them up, and I doubt anything would. The only thing they seem to do consistently right and on schedule is process improvements and die shrinks. They have almost completed retooling a few lines for 45nm and are in the process of tooling a few over to 32nm for Q1'08.

Should be interesting.

By mendocinosummit on 8/15/2006 1:37:08 PM , Rating: 2
Intel did the same thing with the first Pentium D's and look what happened. AMD does not have the means to slap two dual cores togehter and then six months later create a native quad. It worked for them with the X2's. Are these going to be called the X4's

RE: What exactly is Tape Out
By psychobriggsy on 8/15/2006 1:46:41 PM , Rating: 2
Intel have already stated that 45nm will not be operational until Q1 2008, presumably for production manufacturing. That's only 2 and a bit years since the start of 65nm however, still a good rate of progress.

RE: What exactly is Tape Out
By kilkennycat on 8/15/2006 9:23:47 PM , Rating: 3
The digital data tapes used to create the master patterns for the silicon and conductor layers on the silicon wafers from which the individual chips are cut after probe-testing. Tape out means that the chip-design is complete for the target process ( presumably 65nm in this case ). Following first tape-out, masks are made and prototype wafers are run. With in-house mask-creation facilities, these two steps usually take 8-10 weeks. Can be shorter, but I'm sure that a lot of careful double-checking will go into a first run of a new part on a new process. After the wafers are run and probe-tested, the real hard work of checking out all of the logic and electrical functionality begins. Typically a new CPU needs several design/mask/fab/exhaustive-test/ cycles before it can be shipped. And some of these design changes are likely to include tweaks to improve process yields, as well as correcting logic problems. Hence, the estimate for the quad-core being customer-available mid-07 is not far off the mark.

RE: What exactly is Tape Out
By Questar on 8/15/2006 10:57:40 PM , Rating: 2
And some of these design changes are likely to include tweaks to improve process yields

You've got it correct except for that line. It would be insane to make design changes at this point to attempt to increase yeild. Design to process rules are already complete long, long before a chip makes it to tape out. It would be a major bungle to have to respin a chip due to missing yeild targets, and hugely costly. Hell, the delay could be a year.

RE: What exactly is Tape Out
By kilkennycat on 8/16/2006 1:49:33 PM , Rating: 2
The design tweaks to improve chip-yields are mostly related to tweaking logic to improve timing margins. Other tweaks are also applied to optimize power-consumption. Device and timing modeling for a new process is not initially as accurate as for a mature process; models continue to be honed as the process matures. Thus the tweaks in each mask-set update are usually a combination of logic fixes and yield/power-consumption optimizations.

RE: What exactly is Tape Out
By Phynaz on 8/16/2006 4:00:17 PM , Rating: 2
Device and timing modeling for a new process is not initially as accurate as for a mature process

Which is why no sane person (or company) would link a new chip design to a new manufacturing process.

"I modded down, down, down, and the flames went higher." -- Sven Olsen
Related Articles

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki