backtop


Print 28 comment(s) - last by glennpratt.. on Aug 20 at 12:58 PM

NVIDIA on the low end

DailyTech has received finalized specifications of NVIDIA’s upcoming MCP61 family of integrated graphics chipsets. The MCP61 family will not replace the current GeForce 6100 family. Instead the MCP61 family will slip right below the GeForce 6100 family in terms of target market. While the GeForce 6100 family is a two-chip design consisting of a GeForce 6100, 6150 or 6150B coupled with an nForce 410 or 430, the MCP61 family is a single chip design.

NVIDIA will have three variants of the MCP61 family—MCP61P, MCP61S and MCP61V. MCP61P is the premium product with support for one PCI Express x16, two PCI Express x1, standard definition video output, Gigabit Ethernet, 10 USB ports, four SATAII, RAID 0, 1, 0+1 and ASF 2.0 management. It will also be the only member of the MCP61 family to have an sDVO output for external video output capabilities such as DVI, component and TV out.

MCP61S is the standard variant which is slightly crippled. PCI Express graphics support is limited to a single PCI Express x 8 slot. Two PCI Express x1 slots still remain. Available SATA ports have been cut down to two with support for RAID 0 and 1. Ethernet is limited to 10/100 too. USB ports have been cut down to eight USB 2.0 ports as well. MCP61V is the value part and is similar to MCP61S except for the lack of an external PCI Express graphics slot. Nevertheless, MCP61V still retains two PCI Express x1 slots.

The MCP61 family sports a GeForce 7 class graphics, though there are no details specifications on the integrated graphics core. Gone from the graphics core is support for NVIDIA’s PureVideo video processing engine which isn’t too surprising considering the MCP61 family is slotted below the GeForce 6100 family. All MCP61 products are fully compliant with Microsoft’s upcoming Windows Vista Premium with Aero glass. The premium MCP61P will have a 425 MHz graphics clock while MCP61S and MCP61V will be clocked slightly lower at 375 MHz.

Launch of the MCP61 family is expected near the middle of 1H Q3’06 for MCP61S and MCP61V. MCP61P is expected to launch 2H Q4’06. Pricing on MCP61 family products is unknown at the moment but expect MCP61 family products to be significantly cheaper than current GeForce 6100 family products.

Epox has already announced its MCP61S motherboard


Comments     Threshold


This article is over a month old, voting and posting comments is disabled

I'm wondering...
By Josh7289 on 8/11/2006 12:14:40 AM , Rating: 2
Who is this for? I don't think even the large OEMs use motherboards as crippled as the S and V variants.

Also, out of curiosity because it was mentioned, what is the GeForce 6150B?




RE: I'm wondering...
By Anh Huynh on 8/11/2006 1:09:13 AM , Rating: 2
6150B is the NVIDIA Business Platform version. Essentially the same thing as the 6150.

You'd be surprised who'd use it. Slap it in a system with a Sempron and you can have a very cheap system.


RE: I'm wondering...
By DigitalFreak on 8/11/2006 12:54:08 PM , Rating: 2
No different than the low end Intel systems Dell sells with no video slots


"The whole principle [of censorship] is wrong. It's like demanding that grown men live on skim milk because the baby can't have steak." -- Robert Heinlein

Related Articles













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki