The Future of DDR Memory is Serial
February 20, 2006 1:05 PM
comment(s) - last by
24 times capacity is just the beginning
Serial high-speed data paths
Memory constraints are paving way for a new way to connect memory to chipsets using serial technology
In the server space, having lots of memory is crucial to the performance of information serving machines. These days, with increasing demand for information faster and in greater amounts, the amount of RAM a server can hold vs. the speed at which the RAM can operate at is a tough compromise. With current parallel technology, there is an enormous amount of engineering involved in getting a chipset to communicate with memory modules. Worst of all, parallel interfaces tend to run a whole lot more paths than serial.
Engineers are now facing a serious problem. Manufacturers and customers are demanding more memory -- meaning more modules. Unfortunately, more modules and memory channels means running more electrical lanes and it's becoming increasingly difficult with the limited amount of room on a motherboard (server boards or otherwise).
FB-DIMMs or Fully Buffered DIMMs alleviatethis technical problem by replacing data channels that traditionally take up a lot of room, with a small number of ultra high speed lanes connected to a buffer that's directly integrated on the DIMM. New memory modules using the new technology will have its data lines connected in serial similar to the way PCI Express lanes work. High speed lanes will carry data and leaves room for chipsets to support capacities not possible with today's registered DIMMs. In fact, FB-DIMM technology can give a chipset the capability to support up to 192GB or more and a blistering bandwidth of 40GB/sec. compare that to today's 8GB capacity for the same pin count.
At the moment, FB-DIMM is an exclusive technology to the server space because costs will be high and the consumer space just simply doesn't require the massive amounts of memory that FB-DIMM is beneficial for. Today we already have servers that will support 16GB to 32GB of memory. The initial benefits of FB-DIMM will be to drive costs down. After this is accomplished, higher capacity and greater bandwidth designs can be developed and the engineering required to do so will be easier. For memory capacities in the 8GB to 16GB range, FB-DIMM currently does not offer much of an advantage. For anything higher, the rewards are clearly substantial.
What exactly will happen with current generation DDR technology? Not much will change. For the short term, DDR2 will be the next step and by year's end, Intel and others will be introducing DDR3. FB-DIMM is an overall extension of DDR technology and not a replacement. The buffer chip itself will sit on a DDR module, acting as the communications controller between the memory chips and the system chipset via a serial link.
It also appears like memory companies with a strong focus on enthusiasts and power users will be designing and producing FB-DIMM modules for those who demand higher capacities. "FB-DIMM technology could make sense for end users, however FB-DIMMs really only make sense in system memory configurations in excess of 8gb. It may be worth noting that OCZ has dedicated a team of engineers towards taking advantage of FB-DIMM technology for enthusiast grade products," said Ryan Petersen, OCZ Technology's CEO.
Some of us here at DailyTech actually have upwards of 8GB of DDR memory in our systems. Apple's OSX for example, truly shines with lots of memory and the difference is much more pronounced than it is in Windows. Current generation games are also beginning to push desktop memory requirements further. Titles such as Battlefield 2 perform best if there is 1.5GB or more of memory in the system.
Technology in general is moving faster than it ever has, and the up curve continues to increase. The enterprise space is crying out for FB-DIMM technology and it will not be too long before enthusiasts are demanding the same.
This article is over a month old, voting and posting comments is disabled
2/20/2006 8:01:15 PM
rdram was doing this same thing without the buffer chips.
it was proven to be a faster technology eventually when the pc1066 stuff was coming out.
the main reasons they failed, were they were charging too much, they had their illegal patent thing that they were trying to make all the other manufactures pay, that and the other manufacturers all collaborated to make sure ddr won over rambus.
rambus though was probably the better technology anyway. it still probably is. it just died for non technology based reasons on the pc platform.
"Well, there may be a reason why they call them 'Mac' trucks! Windows machines will not be trucks." -- Microsoft CEO Steve Ballmer
Google's Gleaming Glass HQ Gets Mountain View Snub, LinkedIn Gets the Love
May 7, 2015, 6:58 AM
Tech's Tax Day Fortunate Few: Qualcomm, Xerox, GE, et al. Pay Little or No Taxes
April 15, 2015, 11:30 AM
LinkNYC Terminals to Blanket New York City With Free WiFi, Free Calls, and Ads
November 17, 2014, 6:50 PM
Microsoft is Open-Sourcing Most of .NET, Adding OS X and Linux Support
November 12, 2014, 8:27 PM
Home Depot Lost 53 Million Emails, Blames Windows, Buys Execs New Macs
November 9, 2014, 5:00 PM
Former NSA Lawyer: If Google, Apple Encrypt User Data, They’ll Wither on the Vine Like Blackberry
November 6, 2014, 12:15 PM
Most Popular Articles
Top 5 Smart Watches
July 21, 2016, 11:48 PM
Free Windows 10 offer ends July 29th, 2016: 10 Reasons to Upgrade Immediately
July 22, 2016, 9:19 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2016 DailyTech LLC. -
Terms, Conditions & Privacy Information