Print 58 comment(s) - last by Marvin L.. on Dec 11 at 8:00 PM

ATI reference design for Radeon X1950
Ready or not, here comes GDDR4

This week ATI sent an advisory out to its OEM partners announcing the details of the new Radeon X1950 and X1900 graphic cards.  Both of these new cards are based on the same R580 core, but with some fundamental differences.

R580, the 48 pixel-shader processor version of the R520 (Radeon X1800), was announced this past January. R580 features a robust memory controller capable of utilizing several different types of memory, including GDDR4 which was not even available when the Radeon X1900 was first announced.  Since then Hynix and Samsung have both jumped on the GDDR4 train with revenue shipments beginning several weeks ago.  The new GDDR4 variants of R580-based Radeons are now called Radeon X1950.  Radeon X1950 will retain all of the features of the Radeon X1900, and really only have the added benefit of a new cooler, GDDR4 memory and different frequency clocks.

Radeon X1950 at launch will come in two flavors: a high clock "XTX" version, and a CrossFire version.  Both cards feature 512MB GDDR4, and the only major difference between the two is that the CrossFire X1950 houses the composite engine and input interfaces for CrossFire. Just yesterday, ATI issued an advisory to its partners claiming "Clock frequencies for RADEON X1950 family products are pending and will be provided at a later date."  However, in March of this year ATI released a new policy for AIB partners to overclock X1000 series cores with some discretion. While we can already confirm some partners are planning 650MHz core versions, there is still a distinct possibility that higher clocked cards are also in the works. Memory clock frequencies have not been announced either, though Samsung announced its GDDR4 is already capable of 3.2GHz in 8x512Mbit configurations.

The new Radeon X1900 is a low-cost version of the existing Radeon X1900 that only uses 256MB of GDDR3, enabling the card access to the $300 price point.  The Radeon X1900XT 256MB will use the same clock frequencies as other Radeon X1900XT cards: 625MHz core and 1.45GHz memory.

ATI's advisory documentation claims the Radeon X1950XTX will begin sample availability on August 7, with the CrossFire sampling beginning exactly one week later. Sampling of the Radeon X1900XT 256MB will begin immediately.

Radeon X1900 and X1950 will be replaced by another ASIC core, dubbed R600.  R600 is expected to be 80nm with new design features above and beyond the R520 and R580 series.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Is a question allowed?
By smitty3268 on 7/21/2006 11:06:11 PM , Rating: 2
1. The operations that GPU's perform are much more complex than the simple arithmetic that a CPU mostly does. It is also much more parallelized. This means the designs are much more complex, and that makes things much more difficult to ramp up clock speed. It isn't a linear relationship, a little bit more complicated makes things much more difficult.

2. Hand optimization is used some in CPU designs. This is possible because their designs are simpler, and because designs can last for years. GPUs are released on a much faster schedule which doesn't provide the time for as many custom optimizations.

3. GPUs are usually a bit behind on the manufacturing process as well. I'm not sure if this is just an issue of money or if this is to keep yields up since their designs are more complex than CPU designs.

RE: Is a question allowed?
By Tyler 86 on 7/24/2006 12:31:20 AM , Rating: 2
1; We covered that here.

2; Balogna. Hand optimizations are used where hand optimizations are needed. GPU or CPU, Microchip or PCB, Hardware or Software.

3; The manufacturing process is behind due only to a tech gap between Intel, AMD, and TSMC (whom nVidia & ATi use to produce their chips).

Sometimes smaller processes will have lower yields than their larger processes, or they will create hot spots, or have other electrical issues. Sometimes the chip's architecture has to be redesigned to cope.

The larger processes are more refined, and typicly have stable (still not exactly high) yields, which is better for the bottom line.

The TSMC tiers it's manufacturing processes' pricing to it's quality and/or size. Sometimes it's cheaper for ATi or nVidia to stay with a larger manufacturing process.

Intel is simply it's own manufacturer, unlike the 2 major graphics players.
AMD is also it's own manufacturer, yet they're lagging behind in manufacturing process area compared to Intel.

"Game reviewers fought each other to write the most glowing coverage possible for the powerhouse Sony, MS systems. Reviewers flipped coins to see who would review the Nintendo Wii. The losers got stuck with the job." -- Andy Marken
Related Articles
Samsung Shipping Production GDDR4
July 5, 2006, 10:00 AM
Hynix to Refocus on Graphics Memory
May 30, 2006, 2:46 PM
ATI's New Stance On Overclocking
March 30, 2006, 12:15 PM

Most Popular ArticlesAre you ready for this ? HyperDrive Aircraft
September 24, 2016, 9:29 AM
Leaked – Samsung S8 is a Dream and a Dream 2
September 25, 2016, 8:00 AM
Inspiron Laptops & 2-in-1 PCs
September 25, 2016, 9:00 AM
Snapchat’s New Sunglasses are a Spectacle – No Pun Intended
September 24, 2016, 9:02 AM
Walmart may get "Robot Shopping Carts?"
September 17, 2016, 6:01 AM

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki