backtop


Print 47 comment(s) - last by superstition.. on Dec 7 at 10:45 PM

It's meant to enable a new class of thinner devices

There's a new USB plug on the horizon, and this upgraded version will finally be reversible. 

According to the USB 3.0 Promoter Group, the next-generation USB is called "Type-C," and development on the new connector has already begun. 

Type-C, which will be built on existing USB 3.1 specifications, will finally have a feature many have been waiting for: reversibility. 

Other plugs -- like Apple's Lightning connector -- are already reversible, allowing users to easily plug right in without trying to see if they have it upside down or not.


USB is about to get a facelift. [SOURCE: wikimedia]

Type-C is expected to be about the size of a Micro USB plug, and it's meant to enable a new class of thinner devices in the way of phones, tablets, convertibles, laptops, desktops and emerging products. 

“While USB technology is well established as the favored choice for connecting and powering devices, we recognize the need to develop a new connector to meet evolving design trends in terms of size and usability,” said Brad Saunders, USB 3.0 Promoter Group Chairman. “The new Type-C connector will fit well with the market’s direction and affords an opportunity to lay a foundation for future versions of USB.” 

Type-C isn't compatible with existing USBs, but the USB 3.0 Promoter Group will have a specification for adapters and cables so that many existing USB chargers out there aren't immediately considered obsolete.

Type-C should be finalized in mid-2014. 

Back in August, The USB 3.0 Promoter Group announced new USB 3.1 specifications that allow SuperSpeed USB to operate at speeds of up to 10 Gbps.

Source: USB



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Finally!
By s_p_kay on 12/4/2013 4:36:24 PM , Rating: 2
Circular AND *Magnetic* so the magnetic ends pull the connector into proper alignment upon attempted connection. Or possibly add a robotic appendage to grasp the connector and align and insert it properly to avoid typical human error.


RE: Finally!
By inighthawki on 12/4/2013 5:15:43 PM , Rating: 2
I really don't see the dire need for something circular. If you have a magnetic connector similar to a magsafe connector, you really should not have any issues connecting it to your machine.

And honestly, if you spend a little bit of time you could probably make some homemade DIY connectors to do exactly that. You could have a small magnetic dongle constantly attached to the PC and the device and use the new connector instead of plugging it directly into the USB port each time.


RE: Finally!
By Samus on 12/4/13, Rating: 0
RE: Finally!
By ritualm on 12/4/2013 6:35:38 PM , Rating: 2
You don't need rare-earth magnets for a magnetic USB plug. A tiny permanent magnet works just as well.


RE: Finally!
By inighthawki on 12/4/2013 6:58:52 PM , Rating: 4
Even without magnets, there is absolutely no need for a circular connector. I mean, don't get me wrong, but if you try to plug in a USB cord perpendicular to the connection orientation then you may have bigger problems to worry about than how easy it is to plug in.


"Spreading the rumors, it's very easy because the people who write about Apple want that story, and you can claim its credible because you spoke to someone at Apple." -- Investment guru Jim Cramer

Related Articles













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki