Study: Using 3D Printers for Household Products Could Save Hundreds of Dollars
July 30, 2013 1:21 PM
comment(s) - last by
3D printers are now more affordable and easy to use
Three-dimensional printers were once considered too expensive to be part of the typical home's collection of gadgets, but a new study says that idea is changing.
Michigan Technological University researchers -- led by associate professor Joshua Pearce -- have found that it could be cheaper for
households to buy a 3D printer
and create their own products than to buy them from stores.
Three-dimensional printers take materials, such as plastic, and create products by printing layer upon layer from the bottom up, following a specific design.
Pearce and his team came to this conclusion by identifying 20 common products found in the typical American home. They used the website Thingiverse, which offers free designs of these products for 3D printers.
After choosing the 20 designs, they looked at Google Shopping to see what the highest and lowest prices were for these items if they were to be purchased online (minus shipping charges).
They then looked at the costs of purchasing the material for the 3D printer to use for product creation, and compared this data with the Google Shopping prices.
The result was that the average American household would spend anywhere between $312 and $1,944 for the 20 chosen products online as opposed to just $18 if they made them with the 3D printer.
The 3D printers themselves cost anywhere from $350 to $2,000. Pearce said the 3D printer would pay for itself anywhere from a few months to a few years time.
"For the average American consumer,
3D printing is ready for showtime
," said Pearce. "Say you are in the camping supply business and you don't want to keep glow-in-the-dark tent stakes in stock. Just keep glow-in-the-dark plastic on hand, and if somebody needs those tent stakes, you can print them."
"It would be a different kind of capitalism, where you don't need a lot of money to create wealth for yourself or even start a business."
Pearce said the fact that prices are starting to come down for 3D printers, and the fact that it no longer requires an engineer to figure out how to use one, will make 3D printers more ubiquitous in the home in the coming years.
This article is over a month old, voting and posting comments is disabled
RE: But, Does Anyone Actually Need Those Parts?
8/1/2013 9:50:05 AM
Another thing to keep in mind, especially with some of these, is that the strength of the end product can vary, widely, depending on the position of the item being built. These 3D printers, printing as they do in layers, have more strength in one direction (against the grain) than in the other (with the grain)....so building anything that requires any amount of strength will require the designer to figure out which way to lay out the design, for the greatest required strength.
You can also build items (with higher end 3D "printers") to be solid or honeycombed inside. This could result in a lower cost, for a lower required strength item.
You also have certain items, like spoon rests, that I wouldn't make with a 3D printer, solely because of the fact that the material is probably not rated to be "food grade" plastic.
And, as pointed out already, how often will you really need to build these items, versus the initial cost involved??
"So, I think the same thing of the music industry. They can't say that they're losing money, you know what I'm saying. They just probably don't have the same surplus that they had." -- Wu-Tang Clan founder RZA
Staples Now Selling 3-D Printers Online, First Fully 3-D Printed Gun Tested
May 6, 2013, 9:41 AM
HP to Release New Mobile, 3D Printing Products
September 12, 2011, 12:02 PM
SpaceX Falcon 9's Seventh Supply Mission to ISS Ends w/ Fiery Stage 1 Explosion
June 28, 2015, 1:10 PM
Cool Science Video: Glowing Millipede Prowls the Nevada Desert
May 18, 2015, 12:00 PM
Newly Discovered Costa Rican Glass Frog is Kermit's Doppelgänger
April 22, 2015, 11:26 AM
Researchers Hope to Find "Exotic" Lifeforms Inside Crater of Dinosaur Killing Meteor
April 14, 2015, 8:47 PM
Mathematician's Sociological Formulation May Explain the "Hipster Paradox"
April 14, 2015, 1:13 PM
Cool Science Video: This is What a McDonald's Burger Looks Like in Your Stomach
April 7, 2015, 1:43 PM
Most Popular Articles
Exclusive: If Intel and Micron's "Xpoint" is 3D Phase Change Memory, Boy Did They Patent It
July 29, 2015, 10:52 PM
Quick Note: Apple Watch to Get Brick and Mortar Boost From Best Buy
July 27, 2015, 3:00 PM
Windows 10 to Get New Features in October Service Release 2 (SR2)
July 30, 2015, 5:50 PM
As iPad Sales Wane and Watch Flops, iPhone Saves Apple's Profit With Its Heroics
July 22, 2015, 6:13 PM
Editorial: Reddit Allows Itself to be Hijacked as a Hate Platform For Racist Bigots
July 21, 2015, 6:32 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2015 DailyTech LLC. -
Terms, Conditions & Privacy Information