Researchers Plug Porous Glass for Healing Broken Load-Bearing Bones
July 29, 2013 2:42 PM
comment(s) - last by
Special high-tech glass can outperform rival porous materials and cadaver grafts
A lot of attention has been paid of late to the potential of porous bone implants/grafts as a means of fostering new growth and healing, in the case of serious breaks. While
printed porous plastics
an effective technique for non-load bearing parts of the skeleton
-- such as the skull -- in limbs (particularly the leg bones) they produce more mixed results.
Load bearing bone repair is today typically handled in one of two ways. The first approach is to
implant a metal mesh
, while the second is to graft bone tissue from a cadaver. The former approach typically does not heal properly, risking a second break, while the latter approach risks rejection by the body.
But researchers at the
Missouri University of Science and Technology
(Missouri S&T) think they have a solution, which combines the healing capabilities of soft, porous plastic scaffolds with the strength of a metal scaffold.
Their approach involves using silicate 13-93, a porous glass scaffold. Past studies have shown the pores in silicate 13-93 to readily be replaced with hydroxyapatite (HPA), the key mineral in bone. Eventually bone-building cells dissolve and replace the scaffold as well.
Silicate 13-93 is strong, but porous, ideal for promoting healing. [Image Source: ScienceDirect]
Silicate 13-93 is an attractive candidate for bone bearing as it offers 300 µm pores -- just the right size for inviting in new growth -- while offering a compressive strength of 142 +/- 20 Megapascals (MPa) [
], similar to the natural compressive strength of 170 MPa [
The key is developing a technique to build the implant.
The Missouri S&T team has done precisely that, developing a ceramic deposition process that bears
some similarity to 3D printing of polymers
. In the process, the porous implant is built layer by layer into the proper shape using computer controlled ceramic slurry deposition. This approach insures that the resulting structure has relatively uniform composition and hence no weak points.
The material has passed a key preliminary study, showing significant bone regrowth in rodent test subjects in just six weeks. The rodents had part of their skullcap removed; yet quickly recovered with the porous glass implant.
Dr. Mohamed N. Rahaman
, a materials science professor at Missouri S&T, says that three to six months is a reasonable healing time -- six weeks is terrific.
, "Right now, there is no synthetic material that is practical for structural [load-bearing] bone repair. You can have the strongest material in the world, but it also must encourage bone growth in a reasonable amount of time."
The printed Silicate 13-93 promoted healing in just six weeks. [Image Source: Missouri S&T]
Dr. Rahaman -- along with Xin Liu, a Ph.D. student in materials science and engineering at Missouri S&T;
Dr. Yongxing Liu
, an assistant research professor of materials science and engineering;
Dr. B. Sonny Bal
, associate professor of orthopedic surgery at the
University of Missouri-Columbia
Dr. Lynda Bonewald
, Curators' Professor director of the bone biology research program at the University of
Missouri-Kansas City School of Dentistry
[abstract] a paper on the skullcap success in the peer-reviewed bioengineering journal
They are currently actively engaged in follow-up work. Most notably, they're testing the big-ticket item -- using the silicate 13-93 process to regrow femur bones in mice. They're also conducting studies to test the effectiveness of doping the framework with silver to kill pathogens and with copper to promote capillary growth.
If those studies prove successful human trials are likely to soon follow. That's good news for extreme athletes (as well as everyday folks) worldwide.
Missouri S&T [press release]
Acta Biomaterialia [abstract]
This article is over a month old, voting and posting comments is disabled
RE: Mr. Glass
7/30/2013 1:38:10 PM
Do tell, exactly what kind of loads are you bearing on your jaw?
RE: Mr. Glass
7/30/2013 5:13:49 PM
Right cross or upper cut.
"Well, there may be a reason why they call them 'Mac' trucks! Windows machines will not be trucks." -- Microsoft CEO Steve Ballmer
Doctors Save Baby's Life With Temporary 3D-Printed Bronchus
May 24, 2013, 11:49 AM
Injured Man has 75 Percent of His Skull Replaced by Printed Plastic
March 8, 2013, 1:00 PM
Woman Receives World's First Complete 3D Printed Lower Jaw Implant
February 6, 2012, 12:41 PM
Researchers Develop New Titanium Foam Bone Implants
September 23, 2010, 5:06 PM
Creationists are Mad About Google Doodle Depicting Evolution
November 24, 2015, 8:48 PM
DHS and TSA: Whoops, We Missed That 73 Airport Employees May be Terrorists
November 19, 2015, 2:16 PM
Star Wars Spinoff Film "Rogue One", Theme Park Attractions Announced
August 17, 2015, 12:20 PM
SpaceX Falcon 9's Seventh Supply Mission to ISS Ends w/ Fiery Stage 1 Explosion
June 28, 2015, 1:10 PM
Cool Science Video: Glowing Millipede Prowls the Nevada Desert
May 18, 2015, 12:00 PM
Newly Discovered Costa Rican Glass Frog is Kermit's Doppelgänger
April 22, 2015, 11:26 AM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2016 DailyTech LLC. -
Terms, Conditions & Privacy Information