Researchers Plug Porous Glass for Healing Broken Load-Bearing Bones
July 29, 2013 2:42 PM
comment(s) - last by
Special high-tech glass can outperform rival porous materials and cadaver grafts
A lot of attention has been paid of late to the potential of porous bone implants/grafts as a means of fostering new growth and healing, in the case of serious breaks. While
printed porous plastics
an effective technique for non-load bearing parts of the skeleton
-- such as the skull -- in limbs (particularly the leg bones) they produce more mixed results.
Load bearing bone repair is today typically handled in one of two ways. The first approach is to
implant a metal mesh
, while the second is to graft bone tissue from a cadaver. The former approach typically does not heal properly, risking a second break, while the latter approach risks rejection by the body.
But researchers at the
Missouri University of Science and Technology
(Missouri S&T) think they have a solution, which combines the healing capabilities of soft, porous plastic scaffolds with the strength of a metal scaffold.
Their approach involves using silicate 13-93, a porous glass scaffold. Past studies have shown the pores in silicate 13-93 to readily be replaced with hydroxyapatite (HPA), the key mineral in bone. Eventually bone-building cells dissolve and replace the scaffold as well.
Silicate 13-93 is strong, but porous, ideal for promoting healing. [Image Source: ScienceDirect]
Silicate 13-93 is an attractive candidate for bone bearing as it offers 300 µm pores -- just the right size for inviting in new growth -- while offering a compressive strength of 142 +/- 20 Megapascals (MPa) [
], similar to the natural compressive strength of 170 MPa [
The key is developing a technique to build the implant.
The Missouri S&T team has done precisely that, developing a ceramic deposition process that bears
some similarity to 3D printing of polymers
. In the process, the porous implant is built layer by layer into the proper shape using computer controlled ceramic slurry deposition. This approach insures that the resulting structure has relatively uniform composition and hence no weak points.
The material has passed a key preliminary study, showing significant bone regrowth in rodent test subjects in just six weeks. The rodents had part of their skullcap removed; yet quickly recovered with the porous glass implant.
Dr. Mohamed N. Rahaman
, a materials science professor at Missouri S&T, says that three to six months is a reasonable healing time -- six weeks is terrific.
, "Right now, there is no synthetic material that is practical for structural [load-bearing] bone repair. You can have the strongest material in the world, but it also must encourage bone growth in a reasonable amount of time."
The printed Silicate 13-93 promoted healing in just six weeks. [Image Source: Missouri S&T]
Dr. Rahaman -- along with Xin Liu, a Ph.D. student in materials science and engineering at Missouri S&T;
Dr. Yongxing Liu
, an assistant research professor of materials science and engineering;
Dr. B. Sonny Bal
, associate professor of orthopedic surgery at the
University of Missouri-Columbia
Dr. Lynda Bonewald
, Curators' Professor director of the bone biology research program at the University of
Missouri-Kansas City School of Dentistry
[abstract] a paper on the skullcap success in the peer-reviewed bioengineering journal
They are currently actively engaged in follow-up work. Most notably, they're testing the big-ticket item -- using the silicate 13-93 process to regrow femur bones in mice. They're also conducting studies to test the effectiveness of doping the framework with silver to kill pathogens and with copper to promote capillary growth.
If those studies prove successful human trials are likely to soon follow. That's good news for extreme athletes (as well as everyday folks) worldwide.
Missouri S&T [press release]
Acta Biomaterialia [abstract]
This article is over a month old, voting and posting comments is disabled
RE: Mr. Glass
7/30/2013 1:21:10 AM
My first thought was Glass Joe -
"Paying an extra $500 for a computer in this environment -- same piece of hardware -- paying $500 more to get a logo on it? I think that's a more challenging proposition for the average person than it used to be." -- Steve Ballmer
Doctors Save Baby's Life With Temporary 3D-Printed Bronchus
May 24, 2013, 11:49 AM
Injured Man has 75 Percent of His Skull Replaced by Printed Plastic
March 8, 2013, 1:00 PM
Woman Receives World's First Complete 3D Printed Lower Jaw Implant
February 6, 2012, 12:41 PM
Researchers Develop New Titanium Foam Bone Implants
September 23, 2010, 5:06 PM
Nail Polish May Soon be Able to Detect Date Rape Drugs
August 26, 2014, 7:57 AM
SpaceX Falcon 9-R Rocket Suffers Malfunction, Self-Destructs During Test Flight
August 23, 2014, 9:36 AM
Texas Chosen as Site for SpaceX's First Commercial Launchpad
August 5, 2014, 1:44 PM
South Carolina Prison Finds Crashed Drone Carrying Drugs, Phones
August 1, 2014, 2:49 PM
NASA's Mars 2020 Rover Gains Seven New Instruments for Exploration
August 1, 2014, 1:30 PM
NASA Opportunity Rover Breaks Record for Most Miles Traveled on Another Planet
July 29, 2014, 1:38 PM
Most Popular Articles
HTC Preps Nexus 9 With Nvidia K1 64-Bit "Denver" SoC, Android L Onboard
September 10, 2014, 10:21 PM
Apple iPhone 6, iPhone 6 Plus Reviews Roll In
September 16, 2014, 9:13 PM
Big Media: If You Want Privacy, You're Probably a Pirate
September 18, 2014, 2:57 PM
Apple Cripples NFC in iPhone 6, 6+ With Developer Ban
September 17, 2014, 1:00 PM
Home Depot Credit Card Theft is the Biggest in History, 55 Million Cards Stolen
September 18, 2014, 7:53 PM
Latest Blog Posts
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
Space Terrorism is a Looming Threat For the United States
Apr 23, 2014, 7:47 PM
Facebook Aims to Provide Internet to "Every Person in the World" with Drones, Satellites
Apr 1, 2014, 10:20 AM
Retail Mobile Sites Experience Outages in Light of Simplexity's Bankruptcy
Mar 14, 2014, 8:48 AM
Tesla vs. BMW: Who Has the Safer EV?
Feb 1, 2014, 2:56 PM
More Blog Posts
Copyright 2014 DailyTech LLC. -
Terms, Conditions & Privacy Information