Print 59 comment(s) - last by peternelson.. on Jul 11 at 9:01 PM

AM2 motherboard owners rejoice, AM2 has a long future

AMD has released details of its next-generation desktop CPU interface, Socket AM3, to its OEM partners.  In a mildly surprising move, AMD has revealed that AM2 will accept AM2 or AM3 (also dubbed AM2+) CPU packages.  Additionally, recent roadmaps have confirmed that AM3, AMD's upcoming desktop CPU socket, will not be backwards compatible with AM2-package CPUs.  Roadmaps and memos have also confirmed that this AM3 package will be for AMD's "K8L" architecture, and not for the upcoming 65nm AM2 Brisbane CPUs scheduled for launch this December.

The most recent AMD roadmap is also very clear to state AM3 "supports either DDR2 SDRAM or DDR3 SDRAM, but not on the same motherboard."  This is great news for upgraders, as there is a very clear upgrade path: CPU, motherboard, and then memory.  This also infers that AM3 CPUs will have both DDR2 and DDR3 support on the integrated memory controller.  DDR3, like DDR2, has 240-pin, but the two formats are not pin-compatible.

As we also mentioned earlier, Greyhound will be the first desktop processor to support HyperTransport 3.0. Part of the specification for HT-3 is backwards compatibility with older revisions of HyperTransport, and the forward compatibility of the AM2 socket confirms that.  However, it’s important to mention that even though AM3 CPUs will work in the AM2 socket, HT-3 allows for 5.2 Giga-transfers per second, while current AM2 motherboards top out at 2.0 Giga-transfers per second.  Even though the additional headroom is likely not completely necessary, quad-core CPUs will certainly benefit from the additional bandwidth to additional CPUs or co-processors.

There is no word yet on the number of pins the new socket will require, but since AM2 sockets are forward compatible with AM3 CPUs, we can at least deduct that AM3 will have fewer than 940 pins.  Furthermore, since Socket AM2 is forwards compatible with AM3 CPUs, it is also safe to say that AM3 is not a land-grid array (LGA) socket.  AMD will switch its Opteron platform to an LGA-1207 socket on August 1, 2006.  AMD has not announced when Socket AM3 will be released, although since it would be the first HT-3 "ready" socket design, it seems likely that K8L and AM3 for the desktop will launch simultaneously.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: AM2 Motherboard Royally Screwed Over
By mino on 7/6/2006 8:00:39 PM , Rating: 2
IT was and still IS a good idea if it is cost-efficient.

Taking 2.0G of the shelf Barton and upgrading an old system (like mine at the time - on Duron600/KT133A/1.5G SDRAM/R8500) was pretty cost efficient.
For the price of 2.0 Barton CPU I got my system performance to the level of my friend's 1.8Thoroughbred with DDR400.
The upgrade cost me less AND most importantly I was not forced to reinstal my then 2 yrs old Win2k environment.
Hence the reinstal would cost me more than twice the price of the CPU i bought.

BTW it also hugely simlifies situation at an IT dept. I work now. We need to keep _1_!!! stockpile of K7 replacement boards for all AMD systems purchased in the 2000-2004 timeframe.

For the support of the same timeframe we need(ed) 5 stockpiles == 5 (platforms to support) of Intel boards: PPGA, Slot 1, FCPGA. FCPGA2, s423, s478.
After TCO analysis in mid 2004 we decided to classify all pre-478 systems as junk and replace them by new ones.
The support burden was simply so huge it became unefficient to use the machines anymore albeit from performance point of view they were OK.

Those '00 600MHz Durons are ticking just fine and we plan to phase them out in '08 at the earliest.
BTW many of those '00 Durons are now in KM400 systems and many of them have outlived 2 boards allready!

RE: errata
By mino on 7/6/2006 8:05:17 PM , Rating: 2
We had 6 platforms but the i810 boards we had were buggy - not liked W2k. In 2002 we decided drop PPGA ASAP.

By mino on 7/6/2006 8:08:19 PM , Rating: 2
Yes, the huge amount of plaforms reflects the professionalism of the then CTO. ;)

"We don't know how to make a $500 computer that's not a piece of junk." -- Apple CEO Steve Jobs
Related Articles

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki