Study: Light Beam "Twins" Hold Key to Better Signals
May 27, 2013 10:12 PM
comment(s) - last by
By mirroring beam in line, noise is cancelled
It is an elegant and simple solution, but one that is relatively new to the world of fiber optic signaling -- beam mirroring. The approach, already frequently used in the noise-cancelling headphones, is being touted as a promising new route to improving fiber optic routing in a new study by researchers at telecommunications company Alcatel-Lucent SA's (
) Bell Labs unit.
The idea involves making "twins" -- dual beams of light in a fiber that mirror each other. Each peak in one beam is a trough in its twin. Together they bounce along the line, much as a single beam would.
One major limiting factor in fiber optics is noise. In order to send signals farther, beams are transmitted at higher power. But the higher the power, the more beams tend to interact with the material in the fiber's walls, adding noise. Beams have a limiting maximum distance they can travel and maintain fidelity -- after that they need to be received and rerouted, hopping along the next link.
By adopting the "twin" approach, light can travel four times farther that a single beam could. In their study, the Bell Labs stream piped data at 400 Gigabits per second (Gbps) -- four times faster than the best commercially available speeds, down 12,800 kilometers (7953 miles) of fiber. That's a longer line than the longest
While note the first study to suggest the phase conjugate approach, Bell Labs claims its work offers the most straightforward implementation and is proven to travel farther without rerouting. That means
the need to reroute or boost signals
during long transoceanic links may no longer be needed.
[Image Source: Guardian UK]
Lead author Xiang Liu of Bell Laboratories in New Jersey
in an interview with
Sometimes you may send data from London to New York, sometimes you may send it from London to Paris. The links are changing and you cannot keep sending people to the middle of the link.
At the receiver, if you superimpose the two waves, then all the distortions will magically cancel each other out, so you obtain the original signal back. This concept, looking back, is quite easy to understand, but surprisingly, nobody did this before.
Nowadays everybody is consuming more and more bandwidth - demanding more and more communication. We need to solve some of the fundamental problems to sustain the capacity growth.
The approach may allow
faster data transfer speeds
too. As it reduces signal noise, it allows for less repetition of information in a given beam.
The study on the work
in the prestigious peer-reviewed journal
Alcatel-Lucent in currently
in the midst of constructing
a 100 Gbps undersea fiber link between Malaysia, India, and the Middle East.
This article is over a month old, voting and posting comments is disabled
RE: 2 separate frequencies?
5/28/2013 8:22:37 AM
I'd guess that the "noise" actually refers to the interaction between the fiber and the photons, which depends on the photon electric field strength. They might be referring to power losses or nonlinearly-induced "harmonics". The two signals are probably designed to "cancel" so that the maximum electric field is reduced within the fiber medium.
With electrons (fermions), noise can be induced by external electric and magnetic fields. Electrical cables can be designed to nearly cancel external fields. Photons (bosons) have the advantage that they are almost unaffected by external fields. However, there is a limit on the photon power level because very strong photon electric fields can interact with the fiber molecules.
RE: 2 separate frequencies?
5/28/2013 1:57:35 PM
After looking at the BBC link, which also doesn't reveal any details, it sounds like they might be sending the out-of-phase signals over two similar fibers. By subtracting the received signals, they double the signal amplitude and quadruple the signal power. This would cancel "noise" components associated with even powers of the nonlinear response, but not odd powers. The "noise" they are talking about is probably signal components derived from nonlinear distortion that are correlated with the signal. More often, noise refers to random interference that is not correlated with the signal.
"I modded down, down, down, and the flames went higher." -- Sven Olsen
T-Mobile's German Parent Unveils World's Fast Fiber Signal -- 512 Gbps
March 6, 2012, 10:29 AM
Laser Amplified Fiber Broadband May Close Digital Divide
March 18, 2009, 9:19 AM
Google Buys Part of Undersea Fiber Optic Cable
February 26, 2008, 2:01 PM
eBay to Spin Off PayPal Business Next Year
September 30, 2014, 7:28 AM
Facebook to Use Your Browsing Data to Sell Offsite Display Ads
September 29, 2014, 3:52 PM
After Microsoft Complains, EU Rejects Google's Search Settlement for Second Time
September 23, 2014, 4:58 PM
Microsoft Expands Free Office 365 to All College Students
September 22, 2014, 3:21 PM
Apple Adds New Password Protection for Third Party iCloud Apps
September 17, 2014, 8:50 PM
Facebook Tests Moments App, Aims to Keep Your Private Memories Private
September 17, 2014, 5:46 PM
Most Popular Articles
Appalling Negligence: Decade-Old Windows XPe Holes Led to Home Depot Hack
September 8, 2014, 8:58 PM
iBend: Reports Grow of Razor-Thin iPhone 6+ Folding Like Origami in Your Pocket
September 23, 2014, 6:08 PM
New AT&T Mobile Share Value "Double Data" Promotion Lasts Through October
September 28, 2014, 8:32 AM
Update: Apple Releases iOS 8.0.2 Update to Make Up for Botched 8.0.1 Release
September 25, 2014, 8:19 PM
TiVo Mega Features 24TB of Storage, Can Record Three Years* Worth of TV Content
September 8, 2014, 8:45 AM
Latest Blog Posts
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
Space Terrorism is a Looming Threat For the United States
Apr 23, 2014, 7:47 PM
Facebook Aims to Provide Internet to "Every Person in the World" with Drones, Satellites
Apr 1, 2014, 10:20 AM
Retail Mobile Sites Experience Outages in Light of Simplexity's Bankruptcy
Mar 14, 2014, 8:48 AM
More Blog Posts
Copyright 2014 DailyTech LLC. -
Terms, Conditions & Privacy Information