Doctors Save Baby's Life With Temporary 3D-Printed Bronchus
May 24, 2013 11:49 AM
Printed tissue will be repopulated with healthy tissue, will dissolve within two to three years
Amidst the controversy over
, it's important to remember that the potential of the former device goes
far beyond making weapons
I. Baby Blues
That's the story of a baby Kaiba, who suffered from a rare disease called tracheobronchomalacia. Often misdiagnosed as asthma, the disease in some cases isn't as severe, outgrown by age 2 or 3. But in Kaiba's case the disease was more severe; while 1 in 2,200 babies (appr.) have the lesser form, only around 1 in 20,000 have the more serious version he had.
Kaiba's parents April and Bryan first detected the condition when he was six-weeks old. They were enjoying a meal at a restaurant when their watchful eyes noticed their child was struggling to breathe and turning blue. They rushed him to a hospital.
For the next several weeks baby Kaiba continued to stop breathing and turn blue requiring resuscitation. With his bronchus -- part of
the lung's air-tubing system
-- collapsing regularly, his chances looked bleak. Recalls April, "Quite a few doctors said he had a good chance of not leaving the hospital alive. At that point, we were desperate. Anything that would work, we would take it and run with it."
The Ohio family took their baby to the
University of Michigan
Mott Children’s Hospital
to explore an advanced treatment option.
Mott's Children Hospital, Ann Arbor, Mich.
, M.D., an associate professor of
pediatric otolaryngology at the school
, who helped treat him. He comments, "Severe tracheobronchomalacia has been a condition that has bothered me for years. I've seen children die from it. Even with the best treatments available, he continued to have these episodes. He was imminently going to die. The physician treating him in Ohio knew there was no other option, other than our device in development here."
II. Printing a New Bronchus
The "device" in question was a 3D-printed organ formed from a biocompatible polymer known as polycaprolactone (PCL). PCL is growing in popularity in tissue engineering studies as it is generally gentle on the body and dissolves within two to three years -- providing structural support while the body recolonizes a damaged tissue.
Polycaprolactone is produced from caprolactone, a cyclic compound found in heated milk fat.
[Image Source: Wikimedia Commons]
, Ph.D., professor of
and mechanical engineering and associate professor of surgery at U-M comments, "The material we used is a nice choice for this. It takes about two to three years for the trachea to remodel and grow into a healthy state, and that's about how long this material will take to dissolve into the body."
Normally implanting a PCL 3D-printed organ in the U.S. would be illegal -- even if it had the potential to save a life -- due to the convoluted mess of bureaucracy and red tape that is the
U.S. Food and Drug Administration
. But Kaiba's parents took their child to the right place; U-of-M had close relationships with federal regulators, which allowed them to obtain an emergency exemption to test a bronchus implant on Kaiba.
The printed 3D bronchus implant [Image Source: U-of-M]
The implant was a resounding success. Fashioned from CT scans of the baby's own bronchus and sculpted by lasers in the 3D printer, the new tissue was sewn into place without complications. Recalls Dr. Green, "It was amazing. As soon as the splint was put in, the lungs started going up and down for the first time and we knew he was going to be OK."
Within 21 days the youngster was off ventilation and breathing in sweet air thanks to his groundbreaking new implant. He's had no breathing problems since, and is expected to grow a healthy bronchus, making a transition into healthy adolescence.
III. PCL Promising for Other Tissue Replacements
The case was so astounding that the doctors
[PDF] a peer-reviewed article on it in the top medical journal
New England Journal of Medicine
. Dr. Hollister
, "Kaiba's case is definitely the highlight of my career so far. To actually build something that a surgeon can use to save a person's life? It's a tremendous feeling."
Drs. Green and Hollister are racing to apply 3D printed PCL structures to other forms of soft-tissue recovery including ear and nose structures, which are in preclinical model trials. They also are examining using the biopolymer
in bone structures
(spine, craniofacial and long bone).
PCL is being explored to replace other soft tissues like nose cartilage.
[Image Source: MakeCoconut]
And interesting side note -- in a way this is a case of "patient heal thyself". The monomer precursor to PCL (polycaprolactone) is founded in heated mammalian milk fat and is polymerized via a ring opening process. Hence a product of a biochemical found in humans and other mammals is now being applied via advanced technology to saving human life.
U of M 
New England Journal of Medicine
"Nowadays you can buy a CPU cheaper than the CPU fan." -- Unnamed AMD executive
NASA Awards $125,000 Grant for 3D Printed Food on Long-Term Space Travels
May 21, 2013, 1:32 PM
Obama Administration Looks to Kill "The Liberator" 3D Printed Gun
May 10, 2013, 1:48 PM
Injured Man has 75 Percent of His Skull Replaced by Printed Plastic
March 8, 2013, 1:00 PM
Human Embryonic Stem Cells Created with 3D Printing
February 6, 2013, 2:05 PM
Cell-depleted Lung Tissue a Matrix for New Rat Lung Using Stem Cells
August 20, 2010, 2:41 PM
PIQ ROBOTTM reveals its new artificial intelligence software
November 29, 2016, 12:59 AM
One more time - Happy Thanksgiving to Everyone Around the World
November 24, 2016, 4:00 AM
Google’s Smart Contact Lens Project gets halted for 2016
November 20, 2016, 7:00 AM
Cell Research Study shows African Americans have greater immune response to infection
November 10, 2016, 1:00 AM
UTHealth Clinical Trial Shows Progress Using Stem Cells to Treat Traumatic Brain Injury
November 8, 2016, 1:00 AM
Uber Partners with Circulation to Pilot Program Connecting Transportation and Digital Health Care
November 6, 2016, 5:00 AM
Most Popular Articles
OPPO R9 – The Smartphone with Excellent Camera and Long Battery Life
January 12, 2017, 12:01 AM
Are you in the market for a private antenna?
January 11, 2017, 12:01 AM
Comparison: Xiaomi Mi Mix Vs. HTC U Ultra
January 14, 2017, 12:10 AM
Super Hi- Vision Will Amaze the World
January 16, 2017, 9:53 AM
Huawei P10 Smartphone – Coming this Spring
January 11, 2017, 12:01 AM
Latest Blog Posts
News of the Day Wednesday 1/18/2017
Jan 18, 2017, 12:01 AM
Jan 17, 2017, 12:16 AM
News of the Day
Jan 16, 2017, 12:10 PM
News and Technology Advancement
Jan 16, 2017, 7:58 AM
Jan 15, 2017, 12:32 AM
Here is Some News
Jan 14, 2017, 12:39 AM
News: Improved and New products
Jan 13, 2017, 12:01 AM
News around the world
Jan 12, 2017, 12:01 AM
Rumors and Announcements
Jan 11, 2017, 12:01 AM
This year CES and ridiculous gadgets
Jan 10, 2017, 12:01 AM
Nokia Android phone spurns the west.
Jan 9, 2017, 12:08 AM
New at CES 2017 - Changhong 8K Super Slim TV 65ZHQ3R
Jan 8, 2017, 1:07 AM
Debuted at CES 2017 - Vuzix Blade 3000 Smart Sunglasses
Jan 8, 2017, 12:39 AM
Some news of Day
Jan 7, 2017, 12:01 AM
News 2017 CES
Jan 6, 2017, 12:01 AM
Here is the Latest News in Tech
Jan 5, 2017, 1:47 AM
AI Beats World’s Best at Chinese board game “Go”
Jan 4, 2017, 11:21 AM
Las Vegas 2017 CES
Jan 3, 2017, 12:01 AM
News of Jan 2nd 2017
Jan 2, 2017, 4:40 AM
More Blog Posts
Copyright 2017 DailyTech LLC. -
Terms, Conditions & Privacy Information