Cheap, Abundant Waste Sulfur Made Into New Polymer for Plastics, Batteries
April 15, 2013 12:39 PM
comment(s) - last by
Material has better properties than past sulfur-based batteries
University of Arizona
professor Jeffrey Pyun
and his doctoral student Jared Griebel have published an intriguing study, offering up a new sulfur-based polymer which transforms cheap, abundant waste sulfur -- the kind that's
filtered out of burnt fossil fuel exhaust
acid rain pollution
-- into a polymer.
I. From Trash to Treasure
The new polymer can be used both structurally and in polymeric battery electrodes.
The new plastic is light and rugged. The pair bill it as highly promising when paired with liquid lithium in battery cells. The invention comes at an opportune time -- sulfur production is outpacing stock. At North America's largest oil refineries, such as Ft. McMurray in Alberta, refiners have taken to storing powder sulfur in dusty yellow "mountains" waiting for somebody to come up for a clever use for it.
According to Jered Griebel's calculations, 0.5 lb of sulfur is produced per every 19 gallons of refined gasoline. While some of that waste is used to make sulfuric acid, much of it is piling up unused. Professor Pyun bills the resource as the "garbage of transportation",
[press release], "There's so much of it we don't know what to do with it."
Oil refiners are literally piling up "mountains" of unsold waste sulfur, waiting for an invention like this to come along. [Image Source: Ken Cooper Photography]
The pair has filed for a patent on their process.
The production of the new sulfur polymer begins with liquefying the sulfur at high temperatures and pressures (sulfur has a boiling point of roughly 441 degrees Celsius under standard temperatures) via inverse vulcanization. The researchers had to hunt down special materials -- most don't like to blend with the molten sulfur.
II. First Time's the Charm
Ironically, the first material tried of 20 potential candidates worked out the best by far; the rest proved duds. The resulting polymer is between 50 and 90 percent sulfur by weight.
The batteries made from the polymer have better capacity retention (how long charge is preserved) than past Li-S batteries. They also have a higher specific capacity (823 mAh/g at 100 cycles) than past designs, meaning they could store more energy. The relative stability of the Li-S sulfur polymer battery could make them an attractive target for automotive, aerospace, and personal electronics uses where traditional lithium ion batteries have
suffered flammability issues
A petri dish made from the new polymer, next to a pile of raw sulfur. [Image Source: UA]
In addition to the patent, the authors published
[abstract] on the work in the prestigious peer-reviewed journal
. They had a lot of help -- other coauthors listed on the paper are Woo Jin Chung, Adam G. Simmonds, Hyun Jun Ji, Philip T. Dirlam, Richard S. Glass and Árpád Somogyi of the UA; Eui Tae Kim, Hyunsik Yoon, Jungjin Park, Yung-Eun Sung, and Kookheon Char of
Seoul National University in Korea
; Jeong Jae Wie, Ngoc A. Nguyen, Brett W. Guralnick and Michael E. Mackay of the
University of Delaware
in Newark; and Patrick Theato of the
University of Hamburg
The research was funded by the UA,
The National Research Foundation of Korea
Korean Ministry of Education
Science and Technology, and the American Chemical Society
Mr. Griebel has
won an innovation award
for his work.
Nature Chemistry [abstract]
Eurekalert [press release]
This article is over a month old, voting and posting comments is disabled
RE: You can almost make anything from anything
4/15/2013 11:20:16 PM
According to Nissan, the Leaf only needs 4kg of lithium (21 kg lithium carbonate) for its 24kWh battery, so if your figures are right, that's only ~$100 of raw material per car.
The cost of batteries is in the other materials (especially quality graphite, AFAIK) and the manufacturing process.
Lithium sulfur is definitely going to find its way into consumer electronics first. The lifetime requirements are lower and the price premium for high density is very high per Wh.
RE: You can almost make anything from anything
4/16/2013 1:37:50 PM
That is interesting. I wonder why the industry goes on and on about the cost and availability of lithium as the limiting factor in batteries?
"It seems as though my state-funded math degree has failed me. Let the lashings commence." -- DailyTech Editor-in-Chief Kristopher Kubicki
After Volt and Dreamliner 787 Fires, Panel Struggles With How to "Fix" Batteries
April 12, 2013, 2:34 PM
White House Wants 56.2 mpg by 2025, Automakers Are Upset
June 27, 2011, 10:23 AM
The High Cost in Life of America's Coal Addiction, Nuclear Hatred
April 11, 2010, 9:31 AM
Retiree Sues Apple For $7,500 for Wiping Honeymoon Photos From His iPhone
November 30, 2015, 10:23 AM
iPhone 7 May Pack 3-4 GB Memory, More Storage; 4-Inch Comeback is Rumored
November 20, 2015, 10:12 PM
OnePlus One, OnePlus 2 Will Receive Android Marshmallow in Q1 2016
November 16, 2015, 9:58 AM
Lenovo Whoa: Motorola Droid MAXX 2 and Turbo 2 Break Cover in Leaks
October 26, 2015, 3:12 PM
Leak: Apple Preps for First Real Android App Foray With New Apple Music App
October 24, 2015, 1:59 PM
Pepsi Smartphone? Empty Calories Coming Soon to the Midrange
October 12, 2015, 11:41 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2016 DailyTech LLC. -
Terms, Conditions & Privacy Information