Cheap, Abundant Waste Sulfur Made Into New Polymer for Plastics, Batteries
April 15, 2013 12:39 PM
comment(s) - last by
Material has better properties than past sulfur-based batteries
University of Arizona
professor Jeffrey Pyun
and his doctoral student Jared Griebel have published an intriguing study, offering up a new sulfur-based polymer which transforms cheap, abundant waste sulfur -- the kind that's
filtered out of burnt fossil fuel exhaust
acid rain pollution
-- into a polymer.
I. From Trash to Treasure
The new polymer can be used both structurally and in polymeric battery electrodes.
The new plastic is light and rugged. The pair bill it as highly promising when paired with liquid lithium in battery cells. The invention comes at an opportune time -- sulfur production is outpacing stock. At North America's largest oil refineries, such as Ft. McMurray in Alberta, refiners have taken to storing powder sulfur in dusty yellow "mountains" waiting for somebody to come up for a clever use for it.
According to Jered Griebel's calculations, 0.5 lb of sulfur is produced per every 19 gallons of refined gasoline. While some of that waste is used to make sulfuric acid, much of it is piling up unused. Professor Pyun bills the resource as the "garbage of transportation",
[press release], "There's so much of it we don't know what to do with it."
Oil refiners are literally piling up "mountains" of unsold waste sulfur, waiting for an invention like this to come along. [Image Source: Ken Cooper Photography]
The pair has filed for a patent on their process.
The production of the new sulfur polymer begins with liquefying the sulfur at high temperatures and pressures (sulfur has a boiling point of roughly 441 degrees Celsius under standard temperatures) via inverse vulcanization. The researchers had to hunt down special materials -- most don't like to blend with the molten sulfur.
II. First Time's the Charm
Ironically, the first material tried of 20 potential candidates worked out the best by far; the rest proved duds. The resulting polymer is between 50 and 90 percent sulfur by weight.
The batteries made from the polymer have better capacity retention (how long charge is preserved) than past Li-S batteries. They also have a higher specific capacity (823 mAh/g at 100 cycles) than past designs, meaning they could store more energy. The relative stability of the Li-S sulfur polymer battery could make them an attractive target for automotive, aerospace, and personal electronics uses where traditional lithium ion batteries have
suffered flammability issues
A petri dish made from the new polymer, next to a pile of raw sulfur. [Image Source: UA]
In addition to the patent, the authors published
[abstract] on the work in the prestigious peer-reviewed journal
. They had a lot of help -- other coauthors listed on the paper are Woo Jin Chung, Adam G. Simmonds, Hyun Jun Ji, Philip T. Dirlam, Richard S. Glass and Árpád Somogyi of the UA; Eui Tae Kim, Hyunsik Yoon, Jungjin Park, Yung-Eun Sung, and Kookheon Char of
Seoul National University in Korea
; Jeong Jae Wie, Ngoc A. Nguyen, Brett W. Guralnick and Michael E. Mackay of the
University of Delaware
in Newark; and Patrick Theato of the
University of Hamburg
The research was funded by the UA,
The National Research Foundation of Korea
Korean Ministry of Education
Science and Technology, and the American Chemical Society
Mr. Griebel has
won an innovation award
for his work.
Nature Chemistry [abstract]
Eurekalert [press release]
This article is over a month old, voting and posting comments is disabled
4/15/2013 1:52:25 PM
Assuming the sulfur polymer batteries don't exactly mimic classical L-S batteries, the real questions for batteries made on this become:
1. Cycle resilience (how many full discharges before total energy storage drops by 10% or more)?
2. Energy Density: kW/kg and kW/m^3?
If those rival, or are better than current Li-pol, then they really have something.
RE: Li-S batteries?
Dr. Kenneth Noisewater
Dr. Kenneth Noisewater
4/15/2013 2:03:39 PM
Yeah, 823 mAh/g, but at what voltage?
RE: Li-S batteries?
4/15/2013 2:51:46 PM
Wiki says Li-S is 1.7-2.5 Volts.
"I modded down, down, down, and the flames went higher." -- Sven Olsen
After Volt and Dreamliner 787 Fires, Panel Struggles With How to "Fix" Batteries
April 12, 2013, 2:34 PM
White House Wants 56.2 mpg by 2025, Automakers Are Upset
June 27, 2011, 10:23 AM
The High Cost in Life of America's Coal Addiction, Nuclear Hatred
April 11, 2010, 9:31 AM
Sony's PS4 Outsells Microsoft's Xbox One for February
March 14, 2014, 12:36 PM
Skrillex Releases Free Album Inside App, But Crashes Torture Fans
March 13, 2014, 8:04 PM
Microsoft Waives Windows Phone OS Licensing Fees for Two Hardware Makers in India
March 13, 2014, 1:07 PM
Huawei Says Windows Phone is "Low Priority", Relegates It to Dual OS
March 13, 2014, 11:21 AM
$1,200 Nikon 1 V3 Mirrorless Camera Offers 120fps Slow Motion Capture
March 13, 2014, 9:04 AM
Surface 2 LTE Tipped for AT&T, Power Cover Available for Pre-order
March 12, 2014, 9:15 AM
Most Popular Articles
Bitcoin King Pt. II: Mt. Gox's Dictator Karpelès Proves Tragically Flawed
March 7, 2014, 1:12 PM
Hack Reveals Fallen Bitcoin CEO's Posh Tokyo Penthouse
March 10, 2014, 4:28 PM
NASA Considering SpaceX "Red Dragon" for Returning Mars Samples to Earth
March 10, 2014, 2:43 PM
India Could Rock Google With Its Biggest Antitrust Fine Yet -- $5B USD
March 10, 2014, 8:12 PM
Sony, Panasonic Announce Archival Disc Standard Coming in 2015
March 10, 2014, 8:50 AM
Latest Blog Posts
Tesla vs. BMW: Who Has the Safer EV?
Feb 1, 2014, 2:56 PM
Justice Leaks Details of Next HTC One Two Flagship Phone
Dec 5, 2013, 4:04 PM
Global Cyber Espionage Concerns Reveal Growing Cyber Armies
Nov 29, 2013, 11:04 AM
Is The Period Becoming an Expression of Anger?
Nov 26, 2013, 2:02 PM
NSA and Congress -- You Will Never Kill the Constitution, It's an Idea
Nov 10, 2013, 2:00 PM
More Blog Posts
Copyright 2014 DailyTech LLC. -
Terms, Conditions & Privacy Information