backtop


Print 9 comment(s) - last by Sam07.. on Mar 13 at 4:35 PM

This mean an 11 percent solar power conversion efficiency increase overall

A Canadian research team has used a certain type of nanoparticle to increase the efficiency of solar technology.

Ted Sargent, study leader and a professor at the University of Toronto's Engineering Department, along with Dr. Susanna Thon, has improved the efficiency of colloidal quantum dot photovoltaics through the use of plasmonic nanoparticles.

While colloidal quantum dot photovoltaics offer a lot of potential for large-area, low-cost solar power, they're not quite as efficient in the infrared area of the sun's spectrum.

To address this, the team used plasmonic nanoparticles that are spectrally tuned, meaning that they offer control over light absorption. The gold nanoshells were embedded directly into the quantum dot absorber film to do so.


The team added that gold is not the only material that can be used for this, since it isn't the most economical. Lower-cost materials can be used as well.

Using this technique, the team saw a 35 percent increase in efficiency in the near-infrared spectral region. This mean an 11 percent solar power conversion efficiency increase overall.

"There are two advantages to colloidal quantum dots," Thon said. "First, they're much cheaper, so they reduce the cost of electricity generation measured in cost per watt of power. But the main advantage is that by simply changing the size of the quantum dot, you can change its light-absorption spectrum. Changing the size is very easy, and this size-tunability is a property shared by plasmonic materials: by changing the size of the plasmonic particles, we were able to overlap the absorption and scattering spectra of these two key classes of nanomaterials."

From here, the team plans to look into cheaper metals to build a better cell.

Source: Science Daily



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Gaps in information.
By Sam07 on 3/13/2013 4:35:23 PM , Rating: 2
That's interesting, although since quantum dots are able to be infinitely tuned I wouldn't be surprised if QDs can be tuned for the entire spectrum of sunlight to absorb as much energy as possible. Heck, one could even use a multi-layered approach where one layer is tuned for say infrared and visible light while the next layer is tuned for ultra violet and visible light. The materials science is really the meaty and interesting part of this research in that the potential applications are truly limitless. :)

However, do you think that you may be a tad conservative about the practical limits QD solar cells? Commercialized solar panels can reach ~22% CE for polycrystalline panels and ~15% for the much cheaper thin film variety, or roughly 67% and 50% of the Shockley-Queisser limit respectively. So just carrying over the ratios, if researchers can reach even 50% of the theoretical limit that would translate to a CE of 44%!

Considering that a square meter of sunlight that reaches the Earth's surface contains 1100 watts of energy, a one square meter panel could harness 484 watts of energy on a sunny day! Also consider that the roof size of an average middle class home is 223 square meters and if you can allocate 75% for panel coverage then you can collect almost 81kW of energy just in one sunny day! Plus, seeing as how that's much more energy than what most people use in a day, you could make a fortune selling energy back to the utility company! Being a personal energy tycoon sounds rather appealing, wouldn't you say? :)


"It seems as though my state-funded math degree has failed me. Let the lashings commence." -- DailyTech Editor-in-Chief Kristopher Kubicki














botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki