ESA May Print 3D Lunar Base out of Moon's Soil
February 1, 2013 6:36 PM
comment(s) - last by
Multi-dome base being constructed
A 1.5 tonne building block has already been produced for demonstration purposes
The European Space Agency (ESA) is looking to build a lunar base with
using local materials on the moon.
The idea behind this project is to offer settlement for astronauts on the moon while using less of Earth's resources to do so.
ESA has partnered with architectural firms like Foster + Partners to see whether lunar soil could be used for a 3D printed lunar base. In fact, Foster + Partners has already designed a "catenary" dome, which is a hollow closed-cell structure complete with a wall that protects against space radiation and micrometeoroids.
A 1.5 tonne building block has already been produced for demonstration purposes, as seen below:
are built layer-by-layer. The lunar material would be combined with magnesium oxide, which turns it into a "paper" to be printed with. Then, for the "ink," a binding salt is added to transform the material into a solid. The architects are trying to create a structure that can handle the harsh weather and environment that the moon can have.
“3D printing offers a potential means of facilitating lunar settlement with reduced logistics from Earth,” said Scott Hovland of ESA’s human spaceflight team.
“The new possibilities this work opens up can then be considered by international space agencies as part of the current development of a common exploration strategy.”
European Space Agency
This article is over a month old, voting and posting comments is disabled
RE: Did no one read "The Moon is a Harsh Mistress"?
2/2/2013 6:47:06 PM
He still has a point though. I mean if what you say is true then this 3D printing technique wouldn't work either - the dust would be all the material they'd have to work with and i imagine it'd run out pretty fast.
perhaps there's a way to combine the 2 techniques. First have a shaped charge impact the moon to create a crater, maybe use multiple impacts in the same spot to deepen it without widening it (i'll leave it up to nasa how to create a vertical shaft with impacts instead of just a larger crater). Then cap that hole with the 3D printing technique using surrounding dust and maybe even lunar rock loosened up by the impacts.
Once you have a capped hole, you've got the first living quarters for the scientists who can set up mining bots. It might be hard to tunnel through, but the idea here isn't going fast, it's going at all. So have the machine go slow, turn a couple of them on, then return in a couple years while you set up other similar sites for your fully dug out, air tight moon base. Put in a recirculation system, fly in the air from earth, and you've got permenant living quarters for whoever you need to, like large construction crews that'll work on the surface constructing your surface buildings.
It's still a dream sure, but not an unobtainable dream.
"Google fired a shot heard 'round the world, and now a second American company has answered the call to defend the rights of the Chinese people." -- Rep. Christopher H. Smith (R-N.J.)
3D Printed Gun Fails after Six Shots
December 4, 2012, 9:27 AM
HP to Release New Mobile, 3D Printing Products
September 12, 2011, 12:02 PM
Creationists are Mad About Google Doodle Depicting Evolution
November 24, 2015, 8:48 PM
DHS and TSA: Whoops, We Missed That 73 Airport Employees May be Terrorists
November 19, 2015, 2:16 PM
Star Wars Spinoff Film "Rogue One", Theme Park Attractions Announced
August 17, 2015, 12:20 PM
SpaceX Falcon 9's Seventh Supply Mission to ISS Ends w/ Fiery Stage 1 Explosion
June 28, 2015, 1:10 PM
Cool Science Video: Glowing Millipede Prowls the Nevada Desert
May 18, 2015, 12:00 PM
Newly Discovered Costa Rican Glass Frog is Kermit's Doppelgänger
April 22, 2015, 11:26 AM
Most Popular Articles
Free Windows 10 offer ends July 29th, 2016: 10 Reasons to Upgrade Immediately
July 22, 2016, 9:19 PM
Top 5 Smart Watches
July 21, 2016, 11:48 PM
2017 Porsche Panamera: I’ll Take Three of These.
July 24, 2016, 6:44 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2016 DailyTech LLC. -
Terms, Conditions & Privacy Information