backtop


Print 42 comment(s) - last by FaaR.. on Jan 10 at 6:09 AM

German laser system is actually two lasers

A German company called Rheinmetall Defense recently conducted a test on its 50 kW high-energy laser at the company's proving grounds in Switzerland. The company says that its laser system passed all tests with flying colors.
 
The system consists of a pair of lasers mounted on Revolver Gun air defense turrets -- one of the lasers has 30 kW of power and the other supplies 20 kW of power. The laser system uses Beam Superimposing Technology to combine the two lasers into single higher intensity beam. The laser was tested on numerous targets including a 15 mm thick steel girder that it was able to slice from a distance of 1 km.

The second test for the laser system was conducted at a distance of 2 km and the system was able to shoot down drones as they nosedived towards the ground at 15 meters per second. The radar system component of the laser was able to track the drones during their descent from up to 3 km away from the laser.

The final test, and possibly the most impressive feat the laser accomplished during testing, was to show its ability to track and destroy a very small ballistic target. The laser system was able to detect and the target an 82 mm steel ball that was traveling at 50 meters per second and destroy it. The 82 mm diameter steel ball was meant to simulate an incoming mortar round.

The defense company also notes that the proving grounds in Switzerland where the tests were conducted offered weather that was less than ideal for laser system operation. The company says that the laser functioned in ice, rain, snow, and extremely bright sunlight.
 
The U.S. military is also extensively testing laser weapon systems.

Source: Singularity Hub



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Concerns
By cfaalm on 1/8/2013 3:12:49 PM , Rating: 2
Steal your sister's make up mirror, that'll teach 'em.
No idea of the power requirements though. The input often exceeds the output by quite a bit so it wont run on a handful of duracels.

This looks like what they need on the Turkish/Syrian border right now.


RE: Concerns
By Jaybus on 1/8/2013 3:59:44 PM , Rating: 3
No. Your sister's makeup mirror has a reflectivity of perhaps 90%. Not bad for makeup applications, but still lets 10% of the light from the 50 kW laser through. 5 kW is more than adequate to burn a hole through the mirror backing in a few nanoseconds, after which the reflectivity goes to zero and all 50 kW gets through.


"Let's face it, we're not changing the world. We're building a product that helps people buy more crap - and watch porn." -- Seagate CEO Bill Watkins

Related Articles













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki