Automakers Eye Weight Reductions to Meet Fuel Economy Goals
October 25, 2012 9:45 AM
comment(s) - last by
Hydroforming and new welding methods help reduce vehicle weight
New CAFE standards
have automakers reaching for any technology they can find to help improve fuel economy. Many manufacturers are going to electric vehicles or hybrids to increase their overall fleet mileage averages. The problem with focusing only on hybrids and electric vehicles, however, is that most consumers aren't in the market for that type of vehicle.
On traditional gasoline-powered vehicles, automakers are increasingly turning to weight savings as a way to help improve fuel economy. The lighter a vehicle can be made, the less weight the engine has to push or pull around and the less fuel it uses because engines could be made smaller without sacrificing performance.
Some automakers are even turning to removing some features of cars such as CD players and the spare tire to reduce weight according to the
. Both General Motors and Ford are turning to new processes in vehicle assembly to help remove weight from the body of mainstream vehicles.
2013 Ford Fusion
Many automakers are using aluminum rather than steel to help reduce the weight of their vehicles. Hoods, trunks, and lift gates as well as door skins are commonly made from aluminum today. Ford is also
experimenting with carbon fiber
on the Focus.
Switching to lighter materials isn't the only way automakers are going about reducing the weight of the vehicles they produce. They're also reducing weight by changing the manufacturing processes used. Ford, for instance, is using hydroforming on the steel structural pillars of its
One of the big benefits of hydroforming is that it allows the forming of complicated and larger parts that don't need to be welded together. Traditional stamping produces multiple parts that have to be welded at joints. Those joints are points of weakness and add weight. Using hydroforming, rather than other forms of stamping, sheds 18 pounds from each car by eliminating the additional welds.
GM is also doing its part testing a thermal-forming process for lightweight magnesium that weighs 75% less than steel. GM also plans to use a patented welding technology to allow the company to integrate more aluminum into automotive bodies by saving the company from using rivets to join aluminum body panels. The use of the welding process rather than rivets will cut nearly 2 pounds from parts such as hoods, lift gates, and doors.
This article is over a month old, voting and posting comments is disabled
RE: Bout time
10/25/2012 8:09:16 PM
Bicycles are substantially more profitable that cars
BS. Profit margin might be a higher percentage thats it. Profit comes from more than just margin. I dont see any bicycle billionaires owning NFL teams. Tom Benson does it and he
owns the dealerships. The Automakers made a couple of bucks as well. You let me know when a more profitable bicycle manufacturer posts earnings and profits in the billions.
RE: Bout time
10/27/2012 1:11:31 AM
I never said bicycle builders or manufactures would be billionaires. I'm just saying they make a larger percentage. The problem is a bicycle cost a fraction to make compared to a car, so obviously the profit is still a fraction of that of a car.
The same goes for bicycle "dealers" which make a hundred bucks per $400-$500 bicycle sold. Auto dealers make many thousands per vehicle sold. Again, fractions. It's take at least 25x-30x more bicycle sales to profit as much a an owner of a chain of auto dealers.
But while you believe I am wrong on profits (and dealer success) I will chime in that Bill Kozy, of Kozy Cycles in Chicago, owns a huge chain of family-owned bicycle shops started by his father in 1944 and is a billionaire. I'm sure there are other mega-successful bicycle shop owners, but that's one I know of personally. He has a bicycle collection equivilent to that of Jay Leno's garage. Some of the rarest, most valuable bicycles in the world, many tour de france-winning bicycles. He has many shown behind cases in his chain of shops.
"This is about the Internet. Everything on the Internet is encrypted. This is not a BlackBerry-only issue. If they can't deal with the Internet, they should shut it off." -- RIM co-CEO Michael Lazaridis
Ford Uses Carbon Fiber Hood to Reduce Vehicle Weight, Increase Fuel Efficiency
October 9, 2012, 3:37 PM
2013 Ford Fusion Hybrid EPA Certified at 47 MPG (City/Highway)
September 18, 2012, 8:10 AM
Obama Responds to Romney's CAFE Criticism
August 30, 2012, 5:30 PM
Michigan Governor Signs “Anti Tesla” Bill That Bans Direct Sales, GM Applauds Decision
October 22, 2014, 8:56 AM
Report: 2015 Ford Focus Electric MSRP Slashed by $6,000, Will Retail for $29,995
October 18, 2014, 6:23 PM
Chevrolet Sonic EV to Have 200-mile Range, Debut in 2017
October 10, 2014, 12:01 PM
Auto Start-Stop Systems Will be Installed on Nearly 60% of New Vehicles by 2020
October 8, 2014, 4:19 PM
Volvo XC90 to Receive Triple-turbocharged, 450hp 2.0-liter Four-cylinder Engine
October 7, 2014, 2:29 PM
Nissan Still Trying to Make a Profit on Leaf EV
October 6, 2014, 5:46 PM
Most Popular Articles
Chinese Government Declares Digital War Against America's Top Tech Firms
October 20, 2014, 12:07 PM
Samsung Announces Galaxy S5 Plus with Snapdragon 805 Processor, LTE-A
October 22, 2014, 3:40 PM
Windows 8.1 + Android "Sell Mini PC" w/ Bay Trail Creates New PC Form Factor
October 20, 2014, 5:07 PM
Apple's iPad Air 2 Features Triple-core A8X Processor, 2GB of RAM
October 21, 2014, 8:32 PM
Apple Releases iOS 8.1; Adds Apple Pay Support, SMS Relay, Instant Hotspot
October 20, 2014, 1:00 PM
Latest Blog Posts
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
Space Terrorism is a Looming Threat For the United States
Apr 23, 2014, 7:47 PM
Facebook Aims to Provide Internet to "Every Person in the World" with Drones, Satellites
Apr 1, 2014, 10:20 AM
Retail Mobile Sites Experience Outages in Light of Simplexity's Bankruptcy
Mar 14, 2014, 8:48 AM
More Blog Posts
Copyright 2014 DailyTech LLC. -
Terms, Conditions & Privacy Information