Automakers Eye Weight Reductions to Meet Fuel Economy Goals
October 25, 2012 9:45 AM
comment(s) - last by
Hydroforming and new welding methods help reduce vehicle weight
New CAFE standards
have automakers reaching for any technology they can find to help improve fuel economy. Many manufacturers are going to electric vehicles or hybrids to increase their overall fleet mileage averages. The problem with focusing only on hybrids and electric vehicles, however, is that most consumers aren't in the market for that type of vehicle.
On traditional gasoline-powered vehicles, automakers are increasingly turning to weight savings as a way to help improve fuel economy. The lighter a vehicle can be made, the less weight the engine has to push or pull around and the less fuel it uses because engines could be made smaller without sacrificing performance.
Some automakers are even turning to removing some features of cars such as CD players and the spare tire to reduce weight according to the
. Both General Motors and Ford are turning to new processes in vehicle assembly to help remove weight from the body of mainstream vehicles.
2013 Ford Fusion
Many automakers are using aluminum rather than steel to help reduce the weight of their vehicles. Hoods, trunks, and lift gates as well as door skins are commonly made from aluminum today. Ford is also
experimenting with carbon fiber
on the Focus.
Switching to lighter materials isn't the only way automakers are going about reducing the weight of the vehicles they produce. They're also reducing weight by changing the manufacturing processes used. Ford, for instance, is using hydroforming on the steel structural pillars of its
One of the big benefits of hydroforming is that it allows the forming of complicated and larger parts that don't need to be welded together. Traditional stamping produces multiple parts that have to be welded at joints. Those joints are points of weakness and add weight. Using hydroforming, rather than other forms of stamping, sheds 18 pounds from each car by eliminating the additional welds.
GM is also doing its part testing a thermal-forming process for lightweight magnesium that weighs 75% less than steel. GM also plans to use a patented welding technology to allow the company to integrate more aluminum into automotive bodies by saving the company from using rivets to join aluminum body panels. The use of the welding process rather than rivets will cut nearly 2 pounds from parts such as hoods, lift gates, and doors.
This article is over a month old, voting and posting comments is disabled
RE: Bout time
10/25/2012 1:44:22 PM
Fuel efficiency numbers in the US are published by the US EPA, who can't be sued. Automakers aren't liable for the EPA's actions. Automakers usually publish EPA numbers only whether they agree with them or not - this shields them from liability.
RE: Bout time
10/25/2012 3:58:41 PM
I think it was Honda or Toyota that lost a suit in small claims court when a woman showed that she wasn't able to achieve the EPA MPG. Since car companies market their cars based on that rating, it opened the door. If I recall, some appeals court ended up overturning it, but I don't remember on what grounds. The point is, though, that it does appear that the auto companies can be sued over this.
RE: Bout time
10/25/2012 5:46:22 PM
Those lawsuits were prior to the current system.
At the time of those lawsuits, the methods used to rate mpg were 'best case' scenarios that simply weren't possible in the real world.
The EPA completely revamped the methods they used to compute mpg ratings in 2008, primarily because of the lawsuits and general public complaints about the unrealistic ratings that were being used.
"I'm an Internet expert too. It's all right to wire the industrial zone only, but there are many problems if other regions of the North are wired." -- North Korean Supreme Commander Kim Jong-il
Ford Uses Carbon Fiber Hood to Reduce Vehicle Weight, Increase Fuel Efficiency
October 9, 2012, 3:37 PM
2013 Ford Fusion Hybrid EPA Certified at 47 MPG (City/Highway)
September 18, 2012, 8:10 AM
Obama Responds to Romney's CAFE Criticism
August 30, 2012, 5:30 PM
Study Predicts Self-Driving Vehicles Could Rake in Billions
March 6, 2015, 8:34 AM
Dual-Motor Tesla Model S P85D's "Insane Mode" Shocks Passengers
January 28, 2015, 11:18 PM
2016 Cadillac CTS-V Packs 640 hp Punch with 200 mph Reach
January 23, 2015, 3:25 PM
BMW Testing Tech to Allow Users to Auto-Park, Summon Cars Via Smartwatch
December 16, 2014, 9:30 AM
Lamborghini Offers Up $6,000 Leather-Bound Android Smartphone
December 12, 2014, 3:12 PM
Quick Note: GM Teases Next Generation Chevrolet Volt
November 20, 2014, 3:26 PM
Most Popular Articles
Windows 10 Build 10056 -- What's New in the Latest Leak
April 13, 2015, 10:38 PM
TSMC Hypes Its Upcoming 10 nm Process, Amid Struggles to Hit Volume at 16 nm
April 10, 2015, 7:57 PM
Sharp Unveils World's First "4K" Phone Display at Mind-Boggling 806 PPI
April 13, 2015, 11:24 AM
Tech's Biggest Loser on Tax Day: eBay Pays Nearly 99 Percent Tax Rate
April 15, 2015, 3:28 PM
In California Hippies, Religious Right Find Common Enemy in Vaccine Science
April 9, 2015, 4:42 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2015 DailyTech LLC. -
Terms, Conditions & Privacy Information