Ford Uses Carbon Fiber Hood to Reduce Vehicle Weight, Increase Fuel Efficiency
October 9, 2012 3:37 PM
comment(s) - last by
Ford's carbon fiber hood prototype
(Source: Ford Motor Company)
The new carbon fiber hood prototype weighs more than 50 percent less than the standard steel versions, yet is five times as strong as steel
Ford is looking to make its vehicles even more fuel efficient with a new prototype
hood that weighs less than traditional versions.
The Ford European Research Centre partnered with Dow Automotive Systems in the Hightech.NRW research project to develop the carbon fiber hood prototype. Ford also collaborated with the Institute of Automotive Engineering at RWTH Aachen University, Toho Tenax, Composite Impulse, Henkel, IKV (Institute of Plastics Processing) and Evonik.
The new carbon fiber hood prototype weighs more than 50 percent less than the standard steel versions, yet is five times as strong as steel. The carbon fiber is also twice as stiff as steel and will reduce the weight of Ford vehicles by about 750 pounds by the end of the decade.
"It's no secret that
reducing a vehicle's weight
can deliver major benefits for fuel consumption, but a process for fast and affordable production of carbon fibre automotive parts in large numbers has never been available," said Inga Wehmeyer, advanced materials and processes research engineer for Ford European Research Centre. "By partnering with materials experts through the Hightech.NRW research project, Ford is working to develop a solution that supports cost efficient manufacturing of carbon fibre components."
The project started in 2010 and is expected to continue until September 2013. In that time frame, Ford and its partners set out to develop cost effective methods for carbon fiber manufacturing; reduce individual component production times; reduce the amount of finishing work required; meet requirements for painting, and reduce the component weight by at least 50 percent.
"There are two ways to reduce energy use in vehicles," said Paul Mascarenas, Ford chief technical officer and vice president of Research and Innovation. "Improving the conversion efficiency of fuels to motion and reducing the amount of work that powertrains need to do. Ford is tackling the conversion problem primarily through downsizing engines with EcoBoost and electrification while mass reduction and improved aerodynamics are keys to reducing the workload."
So far, the outcome has been a prototype carbon fiber hood that weighs more than 50 percent less than standard steel. The carbon fiber hood was placed in a
at the Composites Europe event in Dusseldorf, Germany. Early testing suggests that it will meet Ford's standards for dent resistance, crash performance and stiffness.
Increasing fuel efficiency is crucial right now, considering the White House finalized the
54.5 MPG Corporate Average Fuel Economy (CAFE) standards
for 2017-2025 model years back in August of this year. The new standards aim to cut oil consumption/dependency, greenhouse gas emissions and encourage green vehicle adoption.
This article is over a month old, voting and posting comments is disabled
RE: Cool, but...
10/10/2012 4:33:10 PM
The problem with political discussions is idiots on both sides seem to think it is all government or no government, when in reality it is about proberly placed government that doesn't overstep it's bounds. True capitalism is Anarchy, full government control is Communism (which was invented by a guy whom worshiped Satan). Noone here really wants either, the fact is that the USA is a Socialist/Capitalist blend economy ideally tilted more capitalist. Standards can be a good thing, but making sure that they are realistic is the important part when they are set.
The government here actually has overstepped in places like national security almost to the point of paranoia and stripped people of many basic rights as well as overspends like a crackhead at a drug dealer convention on just about everything, those issues need to be addressed immediately before people start complaining too much about a 55mpg CAFE standard. The issue now is the same as many government people pointed out at the big 3 when the bailouts were on the table, is they are in debt to the gills and a soft breeze in their income will send them into bankruptcy. Priorities need to be realligned and taken care of today, election year or not, because if it doesn't happen, tomorrow may never get a chance to come.
"Well, we didn't have anyone in line that got shot waiting for our system." -- Nintendo of America Vice President Perrin Kaplan
White House Finalizes 54.5 MPG CAFE Standards for 2017-2025 Model Years
August 28, 2012, 2:52 PM
Lenovo Rolls Out ThinkPad X1 Carbon Ultrabook, ThinkPad Tablet 2 for Windows 8
August 9, 2012, 1:14 AM
Quick Note: Ford Only Sells 38 Focus EVs in U.S. for July
August 3, 2012, 2:15 PM
Report: Ford's Best-Selling F-150 to Lose 700 lbs to Meet EPA Fuel Standards
July 27, 2012, 8:34 AM
Ford, Toyota, and Universal Pictures Celebrate "Back to the Future Day' in Style
October 21, 2015, 4:19 PM
Consumer Reports Flexes Muscle, Hits Slumping Tesla Motors Stock
October 20, 2015, 4:13 PM
Debunked: Beneath the Lies, Nigerian "Pee Generator" Is Still Pissing Into the Wind
October 19, 2015, 7:53 PM
Hot Air? President Obama, G7 Pledge to Eliminate Most Fossil Fuel Use by 2100
June 8, 2015, 5:40 PM
Study Predicts Self-Driving Vehicles Could Rake in Billions
March 6, 2015, 8:34 AM
Dual-Motor Tesla Model S P85D's "Insane Mode" Shocks Passengers
January 28, 2015, 11:18 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2016 DailyTech LLC. -
Terms, Conditions & Privacy Information