Ford Uses Carbon Fiber Hood to Reduce Vehicle Weight, Increase Fuel Efficiency
October 9, 2012 3:37 PM
comment(s) - last by
Ford's carbon fiber hood prototype
(Source: Ford Motor Company)
The new carbon fiber hood prototype weighs more than 50 percent less than the standard steel versions, yet is five times as strong as steel
Ford is looking to make its vehicles even more fuel efficient with a new prototype
hood that weighs less than traditional versions.
The Ford European Research Centre partnered with Dow Automotive Systems in the Hightech.NRW research project to develop the carbon fiber hood prototype. Ford also collaborated with the Institute of Automotive Engineering at RWTH Aachen University, Toho Tenax, Composite Impulse, Henkel, IKV (Institute of Plastics Processing) and Evonik.
The new carbon fiber hood prototype weighs more than 50 percent less than the standard steel versions, yet is five times as strong as steel. The carbon fiber is also twice as stiff as steel and will reduce the weight of Ford vehicles by about 750 pounds by the end of the decade.
"It's no secret that
reducing a vehicle's weight
can deliver major benefits for fuel consumption, but a process for fast and affordable production of carbon fibre automotive parts in large numbers has never been available," said Inga Wehmeyer, advanced materials and processes research engineer for Ford European Research Centre. "By partnering with materials experts through the Hightech.NRW research project, Ford is working to develop a solution that supports cost efficient manufacturing of carbon fibre components."
The project started in 2010 and is expected to continue until September 2013. In that time frame, Ford and its partners set out to develop cost effective methods for carbon fiber manufacturing; reduce individual component production times; reduce the amount of finishing work required; meet requirements for painting, and reduce the component weight by at least 50 percent.
"There are two ways to reduce energy use in vehicles," said Paul Mascarenas, Ford chief technical officer and vice president of Research and Innovation. "Improving the conversion efficiency of fuels to motion and reducing the amount of work that powertrains need to do. Ford is tackling the conversion problem primarily through downsizing engines with EcoBoost and electrification while mass reduction and improved aerodynamics are keys to reducing the workload."
So far, the outcome has been a prototype carbon fiber hood that weighs more than 50 percent less than standard steel. The carbon fiber hood was placed in a
at the Composites Europe event in Dusseldorf, Germany. Early testing suggests that it will meet Ford's standards for dent resistance, crash performance and stiffness.
Increasing fuel efficiency is crucial right now, considering the White House finalized the
54.5 MPG Corporate Average Fuel Economy (CAFE) standards
for 2017-2025 model years back in August of this year. The new standards aim to cut oil consumption/dependency, greenhouse gas emissions and encourage green vehicle adoption.
This article is over a month old, voting and posting comments is disabled
10/9/2012 4:48:37 PM
How much energy does it take to make one of these versus a metal one?
Where does this carbon fiber come from oil based or some other material that magically appears from the green environment?
Does this really improve my vehicle in regards to
safety? (supposedly yes. But I am thinking of the shattering and the projectiles that will cause versus crumpled metal.) Need more data than hype.
Cost of ownership?
Does it hold paint better than the first generation supposedly did?
How fragile is it in Cold weather?
IN Hot weather?
I know what metal cars do in crashes after surviving one major one and going to the scene on way too many. Before I just plop down a premium on "carbon fiber" I want to know it is actually better and this green slant is more than hype.
"What would I do? I'd shut it down and give the money back to the shareholders." -- Michael Dell, after being asked what to do with Apple Computer in 1997
White House Finalizes 54.5 MPG CAFE Standards for 2017-2025 Model Years
August 28, 2012, 2:52 PM
Lenovo Rolls Out ThinkPad X1 Carbon Ultrabook, ThinkPad Tablet 2 for Windows 8
August 9, 2012, 1:14 AM
Quick Note: Ford Only Sells 38 Focus EVs in U.S. for July
August 3, 2012, 2:15 PM
Report: Ford's Best-Selling F-150 to Lose 700 lbs to Meet EPA Fuel Standards
July 27, 2012, 8:34 AM
Study Predicts Self-Driving Vehicles Could Rake in Billions
March 6, 2015, 8:34 AM
Dual-Motor Tesla Model S P85D's "Insane Mode" Shocks Passengers
January 28, 2015, 11:18 PM
2016 Cadillac CTS-V Packs 640 hp Punch with 200 mph Reach
January 23, 2015, 3:25 PM
BMW Testing Tech to Allow Users to Auto-Park, Summon Cars Via Smartwatch
December 16, 2014, 9:30 AM
Lamborghini Offers Up $6,000 Leather-Bound Android Smartphone
December 12, 2014, 3:12 PM
Quick Note: GM Teases Next Generation Chevrolet Volt
November 20, 2014, 3:26 PM
Most Popular Articles
WSJ Report Implies That Google Leveraged Lobbying to Kill Antitrust Abuse Probe
March 25, 2015, 5:37 PM
HTC One M9 Launches Tomorrow Overseas
March 20, 2015, 2:33 PM
Samsung, Dell, Pegatron to Preinstall Microsoft Office 365 on Android Devices
March 23, 2015, 4:02 PM
Half a Billion Dollars of U.S. Weaponry May be Lost to al-Qaeda, Rebels in Yemen
March 23, 2015, 2:12 PM
Windows 10 Build 10041 Rolls Out: What's New in Pictures Pt. 1
March 19, 2015, 2:45 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2015 DailyTech LLC. -
Terms, Conditions & Privacy Information