backtop


Print 23 comment(s) - last by TheLiberalTrut.. on Jun 14 at 8:44 AM

Perpendicular, ultra fast and now spacious too

Seagate this week unveiled its new Cheetah 15K.5 (PDF), the world's fastest hard drive. The new drive is a 300GB beast, which at first doesn't seem like very impressive in terms of specifications. However, this drive spins at a blistering 15,000 RPM and at that speed, no other line of hard drive is faster.

How Seagate achieves the Cheetah's fast rotation speeds is by using platters that are actually smaller than those in standard desktop hard drives. The drives are physically similar, at 3.5-inches like most desktop hard drives, but inside the platters are small, allowing the fluid-bearing motor to whip those discs around at record speeds. The problem in the past with this is that Cheetah drives have been quite limited in size. You could use them for speed-focused applications and scenarios, but if you wanted space, you were out of luck unless more drives were purchased -- and these drives don't come cheap.

With the new Cheetah 15K.5, Seagate has moved the Cheetah family to perpendicular recording for the first time. This allows Seagate to pack more bits in less area, achieving greater capacities. The new line comes in 73GB, 146GB and 300GB capacities.  The following are some of the Cheetah 15K.5's specifications:
  • Max capacity: 300GB
  • Seek Time, Read/Write (average, msec.): 3.5/4.0
  • Transfer Rate, Sustained (MB/sec.): Up to 125MB/sec
  • Reliability rating at full 24x7 Operation (AFR), chance of failure: 0.62%
  • Non-recoverable Read errors per bits read: 1 sector per 10^16
  • Power consumption SCSI (Watts at idle): 12.5w (300GB), 9.6w (146GB), 8.1w (73GB)
  • Interface options: Ultra320 SCSI, 3Gbit/sec. SAS, 4Gbit/sec. Fibre Channel
  • Warranty (years): 5
Seagate's Cheetah family of drives is also known to have very high reliability ratings. Seagate usually labels them as having over 1.5 million hours of solid operation before failure, or MTBF (mean time before failure).

In related Seagate news, the company finished its acquisition of long-time competitor Maxtor, and in fact plans to lay-off as much as 90% of all Maxtor employees. The news caused a major stir and many are concerned about the future of employment for Americans. The company this week also unveiled full-time/full-disc encryption technology for its notebook drives, providing greater security for traveling users.


Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Question
By cnimativ on 6/8/2006 8:32:27 PM , Rating: 1
Because SATA doesnt provide the RAS features that SAS/SCSI/FC standards have?

This is an enterprise/workstation level HDD, not your typical gaming enthusiast drive. Stay with Raptor as you probably won't need the extra I/O.

And if you want true performance, there are tons of SAS/SATA2 controllers out there for less than $1000. Extremely cheap for the performance if you have enough greens to buy FX/EE and quad SLi. HDD is usually system bottleneck anyway.


RE: Question
By Cybercat on 6/9/2006 12:56:19 AM , Rating: 2
Be that as it may, that doesn't mean some of this tech can't be used for a consumer version though. I say it's high-time Western Digital had some Raptor competition.

Even if they lowered it to 10k and something like 200GB (and obviously ax the enterprise features) that would still be extremely compelling.


"This is from the DailyTech.com. It's a science website." -- Rush Limbaugh

Related Articles
Seagate to Cut Maxtor in Half
May 31, 2006, 5:27 PM













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki