Woman Receives World's First Complete 3D Printed Lower Jaw Implant
February 6, 2012 12:41 PM
comment(s) - last by
(Source: United Artists)
She will receive a follow-up surgery later this month
An 83-year-old woman has received the first custom entire lower jaw implant using a
3D printed model
Belgium and Dutch scientists from the BIOMED Research Institute at the University of Hasselt in Belgium, along with surgeons from the Orbis Centre in Sittard-Geleen, Xilloc Medical BV, Maastricht and Cam bioceramics BC in the Netherlands, have successfully replaced the entire lower jaw of an elderly woman for the first time using 3D printing technology.
The woman's lower jaw was terribly infected and was completely removed. Traditionally, microsurgical reconstructive surgery is used, but in this case, the process was too time-consuming and dangerous.
Instead, the scientists and surgeons created a custom implant using
3D printing technology
. They were able to do this by using a 3D printer, which printed layers of titanium powder. At the same time, a laser is used to bind particles together correctly.
"Once we received the 3D digital design, the part was split up automatically into 2D layers and then we sent those cross sections to the printing machine," said Ruben Wauthle, medical applications engineer for LayerWise. "It used a laser beam to melt successive thin layers of titanium powder together to build the part. This was repeated with each cross section melted to the previous layer. It took 33 layers to build 1mm of height, so you can imagine there were many thousand layers necessary to build this jawbone."
A bioceramic coating is then applied to the implant, which is compatible with the tissue of the patient.
The end result was a brand-new lower jaw that weighed 107 grams. This is just over a third heavier than her real jaw, but researchers said she was able to get used to the weight difference quickly. The time needed to create the implant was much shorter and less riskier than traditional methods, taking only a few hours rather than a few days.
"The advantages are that the surgery time decreases because the implants perfectly fit the patients and hospitalization time also lowers -- all reducing medical costs," said Wauthle. "You can build parts that you can't create using any other technique. For example, you can print porous titanium structures which allow
and allow a better fixation of the implant, giving it a longer lifetime."
Only one day after receiving the new jaw implant, the woman was able to speak and eat. The operation was performed in June 2011.
Later this month, a follow-up surgery is scheduled to remove the healing implants that were built into the implant's surface. Once those are removed, a dental bridge will be attached to the jaw, where dentures will be applied.
This article is over a month old, voting and posting comments is disabled
2/7/2012 7:16:47 PM
I guess that the tissue can't grow on and attach itself to metal directly.
"This week I got an iPhone. This weekend I got four chargers so I can keep it charged everywhere I go and a land line so I can actually make phone calls." -- Facebook CEO Mark Zuckerberg
HP to Release New Mobile, 3D Printing Products
September 12, 2011, 12:02 PM
Transitional Middle Ear Found in Mammalian Fossil
April 18, 2011, 12:24 PM
3D Printers to Dip Below $5,000 USD This Year
May 8, 2007, 2:12 PM
Star Wars Spinoff Film "Rogue One", Theme Park Attractions Announced
August 17, 2015, 12:20 PM
SpaceX Falcon 9's Seventh Supply Mission to ISS Ends w/ Fiery Stage 1 Explosion
June 28, 2015, 1:10 PM
Cool Science Video: Glowing Millipede Prowls the Nevada Desert
May 18, 2015, 12:00 PM
Newly Discovered Costa Rican Glass Frog is Kermit's Doppelgänger
April 22, 2015, 11:26 AM
Researchers Hope to Find "Exotic" Lifeforms Inside Crater of Dinosaur Killing Meteor
April 14, 2015, 8:47 PM
Mathematician's Sociological Formulation May Explain the "Hipster Paradox"
April 14, 2015, 1:13 PM
Most Popular Articles
Microsoft Band 2 Stays Focused on Fitness, Debuts Oct. 30, Priced at $249
October 6, 2015, 9:16 PM
Microsoft's HD-500 ("Display Dock"), the Magic Sauce Behind Continuum
October 6, 2015, 5:30 PM
Microsoft Lumia 950 and 950 XL Finally Launch, w/ Windows 10, Liquid Cooling
October 6, 2015, 3:35 PM
Legere Blasts Microsoft for "Bull***t" Snub of T-Mobile and Verizon
October 9, 2015, 3:02 PM
Apple's First Fixes to iOS 9 Land w/ iOS 9.0.1 Release
September 23, 2015, 6:11 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2015 DailyTech LLC. -
Terms, Conditions & Privacy Information