backtop


Print 53 comment(s) - last by The Raven.. on Jan 30 at 1:07 PM


  (Source: CBS)
National Association of Home Builders has promised an investigation into heat-glare from window treatments

Heather Patron of Studio City (Los Angeles, Calif.) accuses her neighbors of a dastardly crime -- melting her Toyota Motor Comp. (TYO:7203Prius.  No, really.  This was no Hawaiian Baby Woodrose-induced optical illusion, her neighbors’ energy-efficient window treatment had melted the plastic molding of her Prius' mirror housings.

Los Angeles is a seasonable southern city on the west coast.  Its average monthly maximum temperatures are historically confined to the 64-77 ºF range year round [source].  Unsurprisingly, the big concern for residents in terms of energy efficiency is the cost of air conditioning.  One of the major sources of heat entering the house is through window light.  So southern Californians, like residents of other longitudinally southern U.S. states, have taken to applying reflective windows treatments, both as a cost-saving measure and as a "green" energy saver.

But in this case the approach backfired, as the neighbors' energy efficient reflective gloss created a brilliant beam during daytime hours that directed itself directly at the car port.

"The side view mirrors were melting.  Anything that was plastic on the car was melting," the Prius-owner recalls.

Melting Prius owner
Ms. Patron shows offer her damaged Prius.  She claims her neighbor's energy-efficient window treatment did the damage.  [Image Source: CBS]

And Ms. Patron says her Prius wasn't the only ones damaged -- a neighboring vehicle saw similar melting.  She comments, "I'm positive that this window is what is causing the damage to my car.  I just don't feel like it’s fair.  I feel like it needs to be known that this is happening. And a lot of people probably have damage out there, that they aren't aware that it’s the windows that are causing this."

She claims to have measured the temperature in the car port when it's exposed to the beam and found it to be 120 ºF.

Studio City
The damage occurred in Studio City, a suburb of southern California's biggest city, Los Angeles. [Image Source: Google Maps]

Similar claims of reflective windows burning people or plastics were leveled in Sept. 2010 by a lawyer staying at the Vdara hotel in Las Vegas, Nevada.  Reportedly in that case the situation was even more severe as the reflective windows were acting as a hyperbolic solar dish, focusing sunlight into a "death ray", which swept across the pool deck.

Reportedly other homeowners have also complained about plastic-melting reflective beams coming off windows with certain energy-efficient treatments.  The National Association of Home Builders has promised a thorough investigation into this problem.

What makes Ms. Patron's story more curious is that automotive mirror housings are usually primarily composed of ABS (acrylonitrile butadiene styrene) [source] -- the same type of plastic found in LEGO blocks and plastic pipes.  Pure ABS has a melting point of 221 ºF [source], so it's unclear how the beam was able to melt the plastic, even if the air temperature was 120 ºF.  

One possibility was that the black mirror plastic absorbed the light, and heated up to a temperature far hotter than the surrounding air (think of an Easy-Bake oven).

Prius
The Prius is the best-selling hybrid electric vehicle in the U.S. (and in the world). 
[Image Source: Jason Mick/DailyTech]

The Prius is the best-selling hybrid electric vehicle in the world.  As of March 2011, 3 million Prius vehicles had been sold worldwide, with 1 million sold in the U.S. alone by April 2011. 

Source: CBS



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

Wouldn't it be great if....
By Philippine Mango on 1/27/2012 7:39:52 AM , Rating: 2
the windows have absolutely NOTHING to do with the melting mirrors and in fact this was caused entirely by an act of vandalism? The reflective coatings on windows do not shine the light in any particular direction but instead diffuse the light in all directions so I fail to see how the window can act as a parabolic mirror to which it actually melts plastic. Even if this window was actually a mirror and it was angled just so with the sun, because it's a flat window, it just isn't going to reflect enough light to cause melting of the side mirror.

This make a good episode of mythbusters.




RE: Wouldn't it be great if....
By JediJeb on 1/27/2012 4:04:03 PM , Rating: 2
One thing to note, panes of glass used in windows are rarely completely optically flat, plus they flex when installed so they can curve into a concave shape easily. Also you don't need but a very small amount of curvature to focus at long distances.


"It's okay. The scenarios aren't that clear. But it's good looking. [Steve Jobs] does good design, and [the iPad] is absolutely a good example of that." -- Bill Gates on the Apple iPad














botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki