backtop


Print 53 comment(s) - last by The Raven.. on Jan 30 at 1:07 PM


  (Source: CBS)
National Association of Home Builders has promised an investigation into heat-glare from window treatments

Heather Patron of Studio City (Los Angeles, Calif.) accuses her neighbors of a dastardly crime -- melting her Toyota Motor Comp. (TYO:7203Prius.  No, really.  This was no Hawaiian Baby Woodrose-induced optical illusion, her neighbors’ energy-efficient window treatment had melted the plastic molding of her Prius' mirror housings.

Los Angeles is a seasonable southern city on the west coast.  Its average monthly maximum temperatures are historically confined to the 64-77 ºF range year round [source].  Unsurprisingly, the big concern for residents in terms of energy efficiency is the cost of air conditioning.  One of the major sources of heat entering the house is through window light.  So southern Californians, like residents of other longitudinally southern U.S. states, have taken to applying reflective windows treatments, both as a cost-saving measure and as a "green" energy saver.

But in this case the approach backfired, as the neighbors' energy efficient reflective gloss created a brilliant beam during daytime hours that directed itself directly at the car port.

"The side view mirrors were melting.  Anything that was plastic on the car was melting," the Prius-owner recalls.

Melting Prius owner
Ms. Patron shows offer her damaged Prius.  She claims her neighbor's energy-efficient window treatment did the damage.  [Image Source: CBS]

And Ms. Patron says her Prius wasn't the only ones damaged -- a neighboring vehicle saw similar melting.  She comments, "I'm positive that this window is what is causing the damage to my car.  I just don't feel like it’s fair.  I feel like it needs to be known that this is happening. And a lot of people probably have damage out there, that they aren't aware that it’s the windows that are causing this."

She claims to have measured the temperature in the car port when it's exposed to the beam and found it to be 120 ºF.

Studio City
The damage occurred in Studio City, a suburb of southern California's biggest city, Los Angeles. [Image Source: Google Maps]

Similar claims of reflective windows burning people or plastics were leveled in Sept. 2010 by a lawyer staying at the Vdara hotel in Las Vegas, Nevada.  Reportedly in that case the situation was even more severe as the reflective windows were acting as a hyperbolic solar dish, focusing sunlight into a "death ray", which swept across the pool deck.

Reportedly other homeowners have also complained about plastic-melting reflective beams coming off windows with certain energy-efficient treatments.  The National Association of Home Builders has promised a thorough investigation into this problem.

What makes Ms. Patron's story more curious is that automotive mirror housings are usually primarily composed of ABS (acrylonitrile butadiene styrene) [source] -- the same type of plastic found in LEGO blocks and plastic pipes.  Pure ABS has a melting point of 221 ºF [source], so it's unclear how the beam was able to melt the plastic, even if the air temperature was 120 ºF.  

One possibility was that the black mirror plastic absorbed the light, and heated up to a temperature far hotter than the surrounding air (think of an Easy-Bake oven).

Prius
The Prius is the best-selling hybrid electric vehicle in the U.S. (and in the world). 
[Image Source: Jason Mick/DailyTech]

The Prius is the best-selling hybrid electric vehicle in the world.  As of March 2011, 3 million Prius vehicles had been sold worldwide, with 1 million sold in the U.S. alone by April 2011. 

Source: CBS



Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Umm
By drycrust3 on 1/26/2012 2:14:41 PM , Rating: 2
The interesting thing here is that the damage is outside of the car. There doesn't appear to be any internal damage too, which is what one would expect.
Looking at the video, it appears another car which also uses the same car port also has the same damage; and it also appears the light is focused and not an even spread, which would point to either a manufacturing defect in the window concerned or the way the reflective coating was applied caused the window to become slightly concave.
As a thought, if the thermal expansion and contraction of the reflective coating was significantly different from that of glass, then it could cause the window to focus light under the right conditions. E.g. if the coating was internally applied and the thermal expansion of the coating was greater, then when the window and the coating are warmer than when the coating was originally applied then the reflective coating would actually "suck" on the window causing it to focus sunlight.


RE: Umm
By Iketh on 1/27/2012 12:35:55 AM , Rating: 2
I think interiors are built to withstand a significant amount of heat already.


RE: Umm
By JediJeb on 1/27/2012 3:54:39 PM , Rating: 2
quote:
The interesting thing here is that the damage is outside of the car. There doesn't appear to be any internal damage too, which is what one would expect.


I was thinking about this. Conclusion is that glass transmits UV radiation very well but transmits IR radiation poorly. In direct sun your interior heats up because the UV heats the components inside the vehicle which then radiate off IR radiation as heat which does not get transmitted back through the glass and causes the interior temperature of a vehicle to rise far above the outside air temperature. If the coating on the building is reflecting more IR than UV then it is going to heat up the outside of the vehicle more than the inside since the glass on the vehicle will not transmit it.


"It seems as though my state-funded math degree has failed me. Let the lashings commence." -- DailyTech Editor-in-Chief Kristopher Kubicki














botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki