Report: Airbus A380s Have Cracks in the Wings, Airbus Says "Don't Worry About It"
January 9, 2012 12:00 PM
comment(s) - last by
(Source: United Artists)
Latest issues come at an inopportune time for Airbus who is trying to fight off Boeing's superjet entrant
Australian Licensed Aircraft Engineers Association
(ALAEA) is sounding the alarm on one of the world's most iconic passenger aircraft designs, claiming that they are suffering from a design flaw.
The aircraft in question is the Airbus A380, the world's largest passenger jet. The four-engine aircraft is manufactured by Airbus, a subsidiary of The European Aeronautic Defence and Space Company N.V. (EADS) (
The airplane, which saw its maiden flight in April 2005, and saw an Oct. 2007 commercial introduction, has enjoyed having no real peer over the last several years, as it offers almost 50 percent more floor space than The Boeing Comp.'s (BA) 747-400. It packs 478 square metres (5,145.1 sq ft) of floor space. The A380-800 variant has a range of 15,400 kilometres (8,300 nmi; 9,600 mi) and has a cruising speed of Mach 0.85 (about 900 km/h or 560 mph at cruising altitude), meaning that it can travel from Hong Kong to New York City, without refueling, in only 17 hours.
But according to the Australian engineering group, the deployed aircraft show cracking in their wing ribs. Steve Purvinas, secretary of the ALAEA, comments, "We can't continue to gamble with people's lives and allow those aircraft to fly around and hope that they make it until their four-yearly inspection."
The cracks were first found on A380s deployed in the fleets of Singapore Airlines (
) and Qantas Airways (
) (which primarily operates out of Australia). The two airlines account 26 out of the 50 delivered passenger A380-800s, as the second and third largest A380 users.
The Airbus A380-800 [Image Source: Qantas Airways]
So far no American airline company has adopted A380. FedEx Corp. (
) and United Parcel Service, Inc. (
) placed commercial orders, but
after being inconvenienced by delays from the aircraft-maker.
Airbus representatives as confirming the wing rib cracking, but insist it's harmless, and that passengers shouldn't be worried about the cracking wings. States the company, "We confirm that minor cracks were found on some noncritical wing rib-skin attachments on a limited number of A380 aircraft. We have traced the origin. Airbus has developed an inspection and repair procedure, which will be done during regular, routine scheduled four-year maintenance checks. In the meantime, Airbus emphasizes that the safe operation of the A380 fleet is not affected."
Qantas has thus far repaired two of the members of its fleet that it spotted cracks in.
The A380 had been being considered as a
possible upgrade option
for the President of the United States' plane, Air Force One. This is not the first issue to afflict the craft -- earlier
wiring issues delayed shipments
of the aircraft.
The cracking issues are bad timing for Airbus. The company is currently trying to sell new customers on the aircraft and ward off Boeing, who
just unveiled the Boeing 747-8 Intercontinental
, a craft that finally brings Boeing abreast of Airbus in the mega-aircraft department. The 747-8
took its maiden flight in Feb. 2010
This article is over a month old, voting and posting comments is disabled
RE: That's just great !
1/9/2012 3:58:35 PM
Then why did it crack first? Something doesn't feel right.
When building something like an airplane that is very weight critical, there is often very little tolerance for mistakes in installation. For example, an unshimmed gap of just 0.050" between two parts can lead to cracking during installation or a very short time after installation. This would not be unheard of in an area like a wing where there are several complex curves over a large area.
This is a very different situation that most people are used to in real-life. Most things used on a daily basis (furniture, cars, houses, etc) have very high initial margins of safety to allow for poor maintenance, etc. This also allows for poor installation techniques.
The A380 likely has some aluminum panels that are 0.050" or less. (I do not have any knowledge on the A380, but Aircraft typically have aluminum panels ranging from 0.016" to .5" with even large models having some areas at <0.050") Consider how much force it would take to bend a 2" x 4" enough to displace the end 2" when your holding it 4", 6", 12", etc away. Consider how durable you would consider the resulting structure. That's what as little as an 0.050" (3/64") gap can do to an aircraft.
From the description, its very likely that
A.) A mechanic is installing the part outside standard installation procedures due to fabrication process difficulties (for example the part is warping during heat treatment)
B.) An engineer made an error is measuring tolerances and an unplanned for gap is occurring
C.) A plan writer is leaving off an important step. For example, deburring or fillet relief cutting holes such that fastener installation or hole cutting is leaving defects that turn into cracks.
None of these is particular unusual or something alarming.
It is unusual to have a private group of civil aviation engineers make a public statement about an issue. Clearly there is a mild/major disagreement how fast the problem should be fixed...
RE: That's just great !
1/14/2012 2:40:44 AM
" Clearly there is a mild/major disagreement how fast the problem should be fixed".
The article suggested that a 4-year inspection cycle meaning another 2 years for a plane that is 2 years old. This is certainly UNACCEPTABLE even though it might be stated in the contract becuase "load bearing" and "non-load bearing" can both severely affect steering accuracy,hence risking the lives of the passengers and crew.
One would suggest Airbus replace one such panel and test for its tensile strength and metal fatigue degradation in order to determine if immediate replacements is needed. It is only fair, don't you think ?.
"It's okay. The scenarios aren't that clear. But it's good looking. [Steve Jobs] does good design, and [the iPad] is absolutely a good example of that." -- Bill Gates on the Apple iPad
Boeing 747-8 Intercontinental Makes Official Debut, Guns for Airbus A380
February 14, 2011, 10:17 AM
Boeing's Next-generation 747-800 Takes First Flight
February 9, 2010, 2:01 PM
Report: Airbus A380 Seen as Possible Replacement for Air Force One
October 19, 2007, 1:11 PM
Airbus Loses Its Last A380 Freight Customer
March 2, 2007, 1:15 PM
Airbus A380 Superjumbo Delayed Again
September 21, 2006, 2:50 PM
Creationists are Mad About Google Doodle Depicting Evolution
November 24, 2015, 8:48 PM
DHS and TSA: Whoops, We Missed That 73 Airport Employees May be Terrorists
November 19, 2015, 2:16 PM
Star Wars Spinoff Film "Rogue One", Theme Park Attractions Announced
August 17, 2015, 12:20 PM
SpaceX Falcon 9's Seventh Supply Mission to ISS Ends w/ Fiery Stage 1 Explosion
June 28, 2015, 1:10 PM
Cool Science Video: Glowing Millipede Prowls the Nevada Desert
May 18, 2015, 12:00 PM
Newly Discovered Costa Rican Glass Frog is Kermit's Doppelgänger
April 22, 2015, 11:26 AM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2016 DailyTech LLC. -
Terms, Conditions & Privacy Information