Print 52 comment(s) - last by voodoochile123.. on Nov 12 at 3:29 AM

Compute Unit (click to enlarge)

Graphics Core Next (click to enlarge)
Sources claim TSMC's manufacturing is that good

Taiwan Semiconductor Manufacturing Company (TSMC) is the world's largest semiconductor foundry, and as such is constantly under pressure from its customers and competitors. The company recently announced that its newest 28nm process has entered mass production. Smaller process geometries typically mean that a faster, smaller, and cheaper processor will be available.
Two of TSMC's biggest customers are AMD and NVIDIA. Both have taped out GPU designs using TSMC's 28nm High Performance (28HP) process. AMD's next-generation GPU series is codenamed Southern Islands. The Tahiti GPU is supposed to launch early in December, while NVIDIA's Kepler GPU will launch in February of 2012.
28HP is the first process from TSMC to use High-k Metal Gate (HKMG) technology, as opposed to the typical silicon oxynitride (SiON) found in 40nm GPUs. HKMG uses a material with a high dielectric constant instead of the traditional silicon dioxide gate dielectric. This allows for a substantial reduction in gate leakage, thus lowering overall power consumption and allowing for higher clock speeds.
According to sources within TSMC, the 28HP HKMG process is doing very well. So well, in fact, that it supports up to a 45 percent clock speed improvement over the firm's own 40G process used to make the last two generations of video cards. This speed improvement is based on the same leakage per gate, but the GPU firms may choose to favor lower power consumption over a pure speed boost.
Our AMD contacts declined to respond to these assertions and directed our attention to a presentation made in June at the AMD Fusion Developer Summit by Eric Demers, the Chief Technology Officer of AMD Graphics.
The flip side of the manufacturing process is the architecture and design, and AMD has already previewed the basis for its future graphics architectures, known as Graphics Core Next (GCN). The basic design of GCN will form the foundation for the next few generations of AMD graphics processors.
The fundamental unit of AMD’s previous designs has been the Streaming Processor, utilizing a Very Long Instruction Word (VLIW) architecture designed to take advantage of Instruction Level Parallelism (ILP). That will be supplanted by the Compute Unit, comprised of multiple 16-wide vector Single Instruction, Multiple Data (SIMD) units designed for Thread Level Parallelism (TLP).
L1 and L2 caches will support the CUs, while the GPU will have access to the main system memory. Support for C++ programming has been added, making it easier to program for the GPU and CPU within the same application.

While all of these changes will benefit compute applications, it is not yet clear what impact this will have on current games and those already in the pipeline. The architectural changes may end up helping or hindering performance. Nevertheless, the entire 28nm graphics lineup will support resolutions of up to 16000 x 16000 pixels.
Of course, yields have always been a big problem with introducing a new node. TSMC had significant challenges with its 40nm process, leading to shortages of the Radeon HD 5800 series. HKMG processes typically use atomic layer deposition for high-k materials, which has been a challenge even for Intel.
Ultimately, we know that the next-generation of GPUs will be "significantly" faster, but the effects of the new architecture are still unknown and could change things positively or negatively. The better the performance, the more likely it is to sell out. The final clock speeds are still being determined, so final performance numbers will have to wait until the first official launch. The latest word on the street is December 6.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Process isn't everything
By Unspoken Thought on 11/6/2011 3:30:17 AM , Rating: 2

After a quick search, couldn't find much on the new S3000 or NSX. But Lexus does have some sexy sports cars. Just FYI.

RE: Process isn't everything
By EricMartello on 11/6/2011 4:40:33 PM , Rating: 2
The NSX had "supercar" pricing so it doesn't get to be compared to cars like the Evolution, Impreza, Corvette, Viper, Trans AM or other high-performing sub-$100K cars. The Lexus LFA is also a six-figure ride with limited availability...while the ISF is still not up to the same performance level as the late-model Supra Turbo was...granted that the Supra would have been more expensive today if you factored in its price with inflation.

Bottom line is that the only sports cars we got from HONDA, even if we include its expensive luxury division, is the NSX and S2000 - both out of production now, and neither had a long production run. Honda is seriously lacking in a performance car tradition that even other Japanese makers have and that is a simple fact. There is no Honda car that is like the Corvette or Nissan Z - honda focused on overpriced lawnmowers and econo-cars and that's clearly reflected in their lineup...although they do make some nice motorcycles.

RE: Process isn't everything
By Alexvrb on 11/6/2011 8:55:51 PM , Rating: 3
Agreed. Honda has never come from that kind of background. The closest thing to affordable sports car that was competitive was the S2000. Toyota was doing great for a while with the Supra, until they killed it off. The FWD Celicas are bleh.

The other Jap carmakers have much more of a sports car lineage, although Mitsubishi is struggling a bit lately, and I've never been fond of Subaru's over-boosted H4s in the STIs. I laugh every time I hear somebody blew one of them up racing, and spends many thousands of dollars on a stronger souped up replacement that could have bought you an LS7 or even LS9.

Nissan has some nice stuff right now though.

RE: Process isn't everything
By EricMartello on 11/7/2011 12:28:20 AM , Rating: 3
I enjoy performance cars of all makes, so its nameplate doesn't matter a lot to me. The Nissan GT-R is a sweet ride with a reasonable pricetag for what it is; I don't care much about their other current offerings. GM's LSx engines are solid and powerful, but are often hated on for being pushrod type engines lacking variable valve timing, multiple cams and other nonsense they don't need. I find that to be ignorant; it's the simplicity of those engines' design that lets them perform as well as they do with high reliability.

On the other hand, the 4G63 turbo engine found in older Eclipses and the Evo 8 and 9 is an extremely dependable turbo engine with a cast-iron block and forged internals. I don't think Mitsubishi is having problems with their cars now so much as it is a lack of direction by the people running the company. I heard they plan to axe the Evo and focus on electric cars - big mistake if the rumor is true.

RE: Process isn't everything
By th3pwn3r on 11/7/2011 3:46:52 PM , Rating: 2
You heard wrong. The Evo will continue to be but it's not going to be a performance car. Reason is due to the head honcho over at Mitsubishi not being a automotive performance enthusiast. If you were the boss and in it for the money you'd take the same route.

RE: Process isn't everything
By EricMartello on 11/9/2011 4:19:57 AM , Rating: 2
You heard wrong. The Evo will continue to be but it's not going to be a performance car. Reason is due to the head honcho over at Mitsubishi not being a automotive performance enthusiast. If you were the boss and in it for the money you'd take the same route.

LOL that sounds more "rumorish" than what I heard...and if the Evo won't be a performance car it won't be an Evo. The Evo always was and will be a "everything that you need, nothing you don't" type of car with high performance...and I think the Evo X deviated from that formula a bit too much...the Evo IX was the last "real" Evo produced.

If I was "the boss" I would most definitely not axe my globally recognized and admired performance icon that has a long history and heritage with the company and brand. You'd have to be a total moron to do that even if you are looking at the bottom line.

Supposing the Evo was a "loss leader" in terms of raw sales, the attention and interest it brings to the brand can make up for it. I see commercials for the Subaru Impreza almost daily...can't remember the last time there was a commercial on TV for an Evo.

"Can anyone tell me what MobileMe is supposed to do?... So why the f*** doesn't it do that?" -- Steve Jobs

Most Popular ArticlesAre you ready for this ? HyperDrive Aircraft
September 24, 2016, 9:29 AM
Leaked – Samsung S8 is a Dream and a Dream 2
September 25, 2016, 8:00 AM
Yahoo Hacked - Change Your Passwords and Security Info ASAP!
September 23, 2016, 5:45 AM
A is for Apples
September 23, 2016, 5:32 AM
Walmart may get "Robot Shopping Carts?"
September 17, 2016, 6:01 AM

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki