Next-generation 28nm GPUs Could Be 45 Percent Faster
November 4, 2011 10:37 AM
comment(s) - last by
Compute Unit (click to enlarge)
Graphics Core Next (click to enlarge)
Sources claim TSMC's manufacturing is that good
Taiwan Semiconductor Manufacturing Company (TSMC) is the world's largest semiconductor foundry, and as such is constantly under pressure from its customers and competitors. The company recently announced that its
newest 28nm process
has entered mass production. Smaller process geometries typically mean that a faster, smaller, and cheaper processor will be available.
Two of TSMC's biggest customers are AMD and NVIDIA. Both have taped out GPU designs using TSMC's 28nm High Performance (28HP) process. AMD's next-generation GPU series is codenamed
GPU is supposed to launch early in December, while NVIDIA's
GPU will launch in February of 2012.
28HP is the first process from TSMC to use High-k Metal Gate (HKMG) technology, as opposed to the typical silicon oxynitride (SiON) found in 40nm GPUs. HKMG uses a material with a high dielectric constant instead of the traditional silicon dioxide gate dielectric. This allows for a substantial reduction in gate leakage, thus lowering overall power consumption and allowing for higher clock speeds.
According to sources within TSMC, the 28HP HKMG process is doing very well. So well, in fact, that it supports up to a 45 percent clock speed improvement over the firm's own 40G process used to make the last two generations of video cards. This speed improvement is based on the same leakage per gate, but the GPU firms may choose to favor lower power consumption over a pure speed boost.
Our AMD contacts declined to respond to these assertions and directed our attention to a presentation made in June at the AMD Fusion Developer Summit by Eric Demers, the Chief Technology Officer of AMD Graphics.
The flip side of the manufacturing process is the architecture and design, and AMD has already previewed the basis for its future graphics architectures, known as Graphics Core Next (GCN). The basic design of GCN will form the foundation for the next few generations of AMD graphics processors.
The fundamental unit of
AMD’s previous designs
has been the Streaming Processor, utilizing a Very Long Instruction Word (VLIW) architecture designed to take advantage of Instruction Level Parallelism (ILP). That will be supplanted by the Compute Unit, comprised of multiple 16-wide vector Single Instruction, Multiple Data (SIMD) units designed for Thread Level Parallelism (TLP).
L1 and L2 caches will support the CUs, while the GPU will have access to the main system memory. Support for C++ programming has been added, making it easier to program for the GPU and CPU within the same application.
While all of these changes will benefit compute applications, it is not yet clear what impact this will have on current games and those already in the pipeline. The architectural changes may end up helping or hindering performance. Nevertheless, the entire 28nm graphics lineup will support
resolutions of up to 16000 x 16000 pixels
Of course, yields have always been a big problem with introducing a new node. TSMC had significant challenges with its
, leading to shortages of the
Radeon HD 5800 series
. HKMG processes typically use atomic layer deposition for high-k materials, which has been a challenge even for Intel.
Ultimately, we know that the next-generation of GPUs will be "significantly" faster, but the effects of the new architecture are still unknown and could change things positively or negatively. The better the performance, the more likely it is to sell out. The final clock speeds are still being determined, so final performance numbers will have to wait until the first official launch. The latest word on the street is December 6.
This article is over a month old, voting and posting comments is disabled
RE: Process isn't everything
11/4/2011 1:20:16 PM
Theoretically, SSD can last up to 1,200,000 hours under normal usage. If it is used 24 hours continuously, it can last over 1300 years. But of course realistically, it wouldn't last 1300 years. It would last about 10 years (according to Anand). If used heavily, it'll probably last 5. However, most people would discard and get news ones before the SSD begins to fail.
The Intel X-25M that I'm using is already 2 years old, and it is still going very strong, despite being constantly formatted for new OSes.
"A lot of people pay zero for the cellphone ... That's what it's worth." -- Apple Chief Operating Officer Timothy Cook
AMD Video Cards Now Support 16000x16000 Resolution
November 1, 2011, 5:43 AM
TSMC Confirms 28nm Chips in Mass Production
October 24, 2011, 3:43 PM
AMD Launches 2GB Radeon HD 6900 Series Video Cards
December 15, 2010, 8:47 AM
TSMC Says 40nm Problems Resolved, Preparing 28nm Fab Production
January 21, 2010, 8:15 AM
ATI Launches Radeon HD 5800 Series, First DirectX 11 GPUs
September 23, 2009, 12:01 PM
"Prepare to be Punished": Microsoft is Killing OneDrive With Cuts, Blames Users
November 3, 2015, 8:23 PM
Apple's New "Magic" Peripheral Line Packs High Tech, High Prices
October 13, 2015, 9:39 PM
Samsung Adds 2 TB 850 EVO, PRO SSDs for $800, $1000
July 7, 2015, 4:23 PM
Seagate Senior Researcher: Heat Can Kill Data on Stored SSDs
May 13, 2015, 2:49 PM
How to Recover Most Apps After Your NVIDIA Driver Crashes in Windows 10
March 30, 2015, 12:54 PM
Tinkerer Gets Old School Mac Plus Running on the Modern Web
March 24, 2015, 6:41 PM
Latest Blog Posts
Sceptre Airs 27", 120 Hz. 1080p Monitor/HDTV w/ 5 ms Response Time for $220
Dec 3, 2014, 10:32 PM
Costco Gives Employees Thanksgiving Off; Wal-Mart Leads "Black Thursday" Charge
Oct 29, 2014, 9:57 PM
"Bear Selfies" Fad Could Turn Deadly, Warn Nevada Wildlife Officials
Oct 28, 2014, 12:00 PM
The Surface Mini That Was Never Released Gets "Hands On" Treatment
Sep 26, 2014, 8:22 AM
ISIS Imposes Ban on Teaching Evolution in Iraq
Sep 17, 2014, 5:22 PM
More Blog Posts
Copyright 2016 DailyTech LLC. -
Terms, Conditions & Privacy Information