Introducing "Tritium": NVIDIA's System-Wide Component Platform
May 10, 2006 9:00 PM
comment(s) - last by
NVIDIA has plans for the ultimate overclocker's system - your next motherboard may be an overclocking monster
Several weeks ago,
) published some preliminary details on the NVIDIA
platform. NVIDIA's vision is to combine several different components, from memory to video cards to motherboards, all under the
certification. Motherboards, for example, will undergo a strict set of criteria that, if satisfied, will receive special certification from NVIDIA said to "maximize overall system performance."
For example, motherboards will be required to enable certain voltages for maximum memory tweaking. The latest specification for motherboard manufacturers insists there be 25mV granularity on everything from CPU core voltage to memory VDDIO. An abbreviated list of the motherboard voltages is as follows, though we have been told NVIDIA has slightly tightened the specifications within the last few weeks:
CPU (AMD AM2 Socket)
V_Core: 0.775V to 2.2V
VDDIO: 1.8V to 2.5V
VTT: 0.9V to 1.25V
V_Core: 1.2V to 1.45V
V_PEX: 1.5V to 1.7V
V_HT: 1.2V to 1.5V
V_Core: 1.5V to 1.7V
V_PEX: 1.5V to 1.7V
V_HT: 1.2V to 1.5V
Furthermore, all motherboards expecting to be
certified must meet or exceed certain frequency requirements. These include but are not limited to:
CPU memory interface: DDR2 interface running at 800MHz
CPU C51XE 16 x 16 HyperTransport interface: 1.5GHz
C51XE x16 PCI Express link: 150MHz
C51XE/MCP55XE 16 x 16 HyperTransport interface: 1.5GHz
MCP55XE x16 PCI Express link: 150MHz reference clock
Features such as
) will be optimized to run on these
platforms. Of course, many of these features are useless without BIOS support. The motherboard BIOS options we've heard thus far include everythign from 425MHz FSB adjustments (in 1MHz increments) to 1.0 to 4.5 CAS Latency control (in 0.5 increments). Overvoltage and individual frequency controls are also required -- and virtually every frequency control we saw was in 1MHz increments. All SBIOS hooks must be inserted so that the board will work with NVIDIA's nTune software.
Memory providers are also included in the
umbrella. Certain memory manufacturers are already working on SPD timings and extensions designed for
certified motherboards. Memory will also be required to work at certain voltages and timings, though obviously not as aggressive as the motherboards can fully support via the BIOS.
Video card manufacturers will complete the trifecta with BIOS. Cards will be required to comply with 1MHz over/underclock increments though again not as aggressive as the motherboard BIOS can support. Again, all of these functions must also be supported by NVIDIA's nTune software.
General specifications must be met by all components to meet the Tritium certification as well. The motherboard x16 PCIe slots must be spaced apart enough to support Quad SLI, and all components must operate at or below temperatures thresholds set by NVIDIA documentation. The system must also contain IEEE 1394b support, two PCI 2.3 interfaces, dual Gigabit Ethernet over the NVIDIA PHY and 8 channel HDA jacks in the back. Even the power supply must be rated to comply with the 150W video card specification set forth by NVIDIA for SLI.
NVIDIA certainly has an aspiring project on its hands, raising the bar quite a bit from what overclockers have traditionally considered sacred on only a few motherboards.
The important thing to recognize is that when all of the right components are in place, the system will overclock itself,
though one can still tweak things manually. We expect to see announcements from NVIDIA and some of the
partners within the next few weeks about specific compliance, but only a few partners will have components at the AM2 launch. However, don't get too comfortable with the name
. NVIDIA has not registered it with the USPTO.
This article is over a month old, voting and posting comments is disabled
A link to the past...
5/11/2006 12:22:34 AM
I'm somewhat reminded of the old MPC/MPC2 standards when I read this, except its taking such a think to a new level and beyond. While a good idea this could easily become cost prohibitive from the extra money involved to make decent boards. I would imagine you should start looking at paying $100+ for boards conforming to this.
"Young lady, in this house we obey the laws of thermodynamics!" -- Homer Simpson
nForce 590 Details Leaked
May 8, 2006, 10:31 PM
Rosewill Releases 3 New Powerline Networking Adapters
May 21, 2013, 4:29 PM
German Researchers Test 40 Gbps Wireless Broadband
May 21, 2013, 11:01 AM
Qualcomm, Samsung Push AMD to Fourth Place in Processor Market
May 21, 2013, 7:50 AM
Supermicro Looks to Shake Up Server Market
May 20, 2013, 9:00 PM
HiPerGator Supercomputer is Florida's Most Powerful Supercomputer
May 17, 2013, 7:08 AM
5/7/2013 Daily Hardware Reviews
May 7, 2013, 12:02 PM
Most Popular Articles
High School Student Creates Storage Device that Can Charge in 20 Seconds
May 20, 2013, 6:51 AM
Seawater Cooling Saves Data Center Big Bucks, Energy, Despite Jellyfish Issues
May 17, 2013, 3:23 PM
Newegg Legal Chief: "We don't Feed the Trolls"; Defeats Bell Lab Shell Comp.
May 17, 2013, 10:11 AM
Former Intel CEO Regrets Passing Up on iPhone Gravy Train
May 17, 2013, 11:46 AM
NASA Awards $125,000 Grant for 3D Printed Food on Long-Term Space Travels
May 21, 2013, 1:32 PM
Latest Blog Posts
Lumosity: Does it Work?
May 22, 2013, 8:20 PM
Quick Note: Sony "Teases" PS4 Ahead of Xbox Reveal in New Video
May 20, 2013, 12:33 PM
Nokia Introduces Instagram-Like App of Its Own to Help Lumia Sales
May 20, 2013, 7:10 AM
Parents of Pre-Teen Drivers Commonly Practice Distracted Driving Says Study
May 9, 2013, 7:16 AM
Apple's iOS 7 Running Into Internal Delays Due to Massive Overhaul
May 1, 2013, 4:26 PM
More Blog Posts
Copyright 2013 DailyTech LLC. -
Terms, Conditions & Privacy Information