Print 31 comment(s) - last by YashBudini.. on Apr 29 at 10:38 PM

Professor Stuart Rowan at Case Western led a team of researchers to develop a self-healing coating.  (Source: Case Western Reserve University via YouTube)

When exposed to UV light, the polymer disassembles and reforms, patching scratches or cracks.  (Source: Case Western Reserve University via YouTube)

The material is shown here, healing from a razorblade scratch.  (Source: Case Western Reserve University via YouTube)
New coating is ready for commercial applications

A major emerging field of materials science is to formulate new materials which, like living organisms, can self heal from macroscopic or microscopic damage.  An international team of researchers has created a new kind of coating that could form the basis of true self-healing car paints [press release 1press release 2; video].  

Nissan implemented a primitive form of self-healing car paint in its EX and G lines, but the actual real world results of that endeavor have been mixed.

This new effort is comprised of teams from Case Western Reserve University in Cleveland, Ohio, led by Stuart J. Rowan; the Adolphe Merkle Institute of the University of Fribourg in Switzerland, led by Christoph Weder; and the U.S. Army Research Laboratory at Aberdeen Proving Ground in Maryland, led by Rick Beyer.

They have created a new self-healing coating that could be used as the basis of paint.  The coating is formed via a technique called supramolecular assembly.  Whereas usual polymers are single large molecules with thousands of atoms, the special new coating is an ionic polymer composed of metal ions and smaller polymeric molecules.  The metal ions act as ”glue", linking the smaller molecules together to form chains.

The polymer's special character shows up when you expose it to UV light.  The polymer enters a "molten" state, filling gaps and scratches.  It then resolidifies.  

Stuart Rowan, a professor of macromolecular engineering and science and director of the Institute for Advanced Materials at Case Western Reserve University, describes, "These polymers have a Napoleon Complex.  In reality they're pretty small but are designed to behave like they're big by taking advantage of specific weak molecular interactions."

Researchers created large scratches and dings on the test coat, then shined a UV light on it, locally.  The material "healed" itself in seconds.  And unlike the self-healing found in living creatures, the material exhibited the ability to go through numerous scratching/healing cycles in a brief time without a loss of integrity.

The researchers evaluated a number of metal ion polymers before picking their current target.  They found that mechanical properties (strength, flexibility without breaking, etc.) increased as the order of the resulting polymer increased.  But as the mechanical strength increased, the ability to be healed decreased.  So scientists opted for a moderate polymer with decent healing and mechanical traits.

As we discussed in our previous piece on self-healing plastics, microcracks -- microscopic scratches or cracks -- ultimately lead to big damage over time.  Aside from resisting macroscopic scratches, the materials could undergo periodic treatments with the UV lamp to prevent wear from microcracks as well.

The research team feels the coating is ready for prime time.  Professor Rowan says the next step is commercialization, stating, "One of our next steps is to use the concepts we have shown here to design a coating that would be more applicable in an industrial setting."

The study on the work was published [abstract] in the journal Nature, perhaps science's most prestigious journal.  

The work was funded by the Army Research Office of the U.S. Army Research Laboratory, the U.S. National Science Foundation, and the Adolphe Merkle Foundation.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

By jbgrant on 4/27/2011 10:47:45 AM , Rating: 2
The trend in the auto paint industry is cheaper and cheaper, not better and better. Even toyota has decided certain new models don't need clear coat because the consumer doesn't demand it (Tundra). Honestly, a lot more protection could be added for less money by just giving factory cars a better (more expensive) finish at the factory. Most cars today have half of clear coat they did in the 90's; this limits UV protection and makes moderate scratch removal all but impossible. If consumers wanted a new tech paint like this, they would be demanding more layers of clear coat, harder clearcoat, and certainly not 1-stage paint systems like toyota has reintroduced. The paint technology of today allows for a finish that lasts 20 years in the sun without fading and withstands polishing and correction, but that's just not where consumers put their money. If auto manufacturers start marketing their paint performance with real information, then perhaps they could create some preferential demand for better finishes. I admit the idea is pretty cool, but major improvements can be made very easily in much less experimental ways (but somebody has to pay for good paint).

By YashBudini on 4/29/2011 10:38:23 PM , Rating: 2
If auto manufacturers start marketing their paint performance with real information, then perhaps they could create some preferential demand for better finishes.

Of that'll be the day.

Also - Are you saying overall that 3 stage paints should last longer than regular paints jobs? Perhaps by sheer volume alone?

"Death Is Very Likely The Single Best Invention Of Life" -- Steve Jobs

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki