Print 13 comment(s) - last by wallijonn.. on Apr 27 at 11:18 AM

Linksys WRT300N 802.11n Router
802.11n ratchets up the speeds... if you're in a perfect environment

With the 802.11n draft standard complete, 802.11n based products have been showing up on the market from all the major players. According to the version 1.0 of the draft standard, 802.11n supports link speeds of 150 Mbps and 300 Mbps -- the devices tested by eWeek offered as much as 112.17 Mbps of real-world full-duplex traffic.

But while the performance gains over 802.11g products are quite remarkable, there are many caveats to this performance. For one thing, with the current draft standard, compatibility with legacy networks is a problem. eWeek's testing showed that performance of the Linksys 802.11n gear dropped to below 40 Mbps when legacy wireless devices were detected. The Linksys router tested also caused performance issues with legacy 802.11g devices even causing one router to drop its clients. And to top things off, 802.11n draft standard products are well over $200 for a router and accompanying client adapter -- that's a pretty penny for a product that is not even guaranteed to be upgradeable to the final 802.11n spec. From eWeek:

With this uncertainty in mind, it is not advisable to invest in these products lock, stock and barrel. Enterprise-grade WLAN manufacturers continue to wait for the standard to fully bake, and enterprise customers should do the same. Like the Airgo MIMO-based products we've tested during the last year and a half, draft 11n products should be considered only for highly specific needs requiring a fast wireless connection. And buyers should not yet expect the products to support the standard down the road.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

Seems like another scam...
By Hydrofirex on 4/26/2006 2:31:39 PM , Rating: 2
I made the mistake of rushing out and grabbing a D-Link MIMO router when they came out and upgraded to their "Super-G" speeds... what a mess! My generic MS G router was MUCH stabler and had twice the connection strength, though it was not as fast. But, if you can't keep a connection, what good is speed? Further, the whole point of MIMO was to have incresed range! Let me restate - it gets half the range of a generic MS G router!

I gave up and just keep it in G-mode, what a waste. Even with firmware updates it still drops transfers and clients - it's the most consistent thing it does do. And, I did swap it out for another one to no avail. The kicker is that they advertise the thing as backwards compatible. Which, for them, means that if you turn off the advanced speed features it is backwards compatible. It's Super-G or G/B - NOT both. In other words, it is not backwards compatible. *sigh* Why do they have to lie?

This seems like a lot more of the same. How are they supposed to get wide-area wireless broadband up when they can't even do it inside my house?

RE: Seems like another scam...
By glennpratt on 4/26/2006 4:08:06 PM , Rating: 3
A: D-Link sucks, don't blame 802.11n. Every D-Link wireless product I've ever used has been utter crap. They make decent 24 port budget switches though.

B: Your experience on range flies in the face of mine and many others experience with pre-N stuff. See point A.

C: Wide area wireless broadband will not be powered by a $100 wireless router from Circuit City.

"Let's face it, we're not changing the world. We're building a product that helps people buy more crap - and watch porn." -- Seagate CEO Bill Watkins

Most Popular ArticlesAre you ready for this ? HyperDrive Aircraft
September 24, 2016, 9:29 AM
Leaked – Samsung S8 is a Dream and a Dream 2
September 25, 2016, 8:00 AM
Yahoo Hacked - Change Your Passwords and Security Info ASAP!
September 23, 2016, 5:45 AM
A is for Apples
September 23, 2016, 5:32 AM
Walmart may get "Robot Shopping Carts?"
September 17, 2016, 6:01 AM

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki