backtop


Print 53 comment(s) - last by tjh.. on Apr 27 at 2:10 PM


Detailed specifications of the new drives were also available via the website
A PDF accidentally showed up on Seagate's website earlier today with the latest details on perpendicular desktop hard drives

Seagate insiders contacted us early this morning with a few snippets of information (PDF) concerning the upcoming Barracuda 7200.10 series hard drives.  Like other Barracuda drives, the 7200.10 series are based on 7,200RPM spindles. 

Two 750GB models have already shown up on the Seagate website.  The Barracuda 7200.10 ST3750640A (PATA) and the ST3750640SA (SATA) will be two new models we can look forward to seeing this year.  The Seagate webpage reveals dozens of other NCQ-ready 7200.10 based products ranging from 200GB on up.  Cache information was not available via the website yet, but the official Seagate PDF claims the Barracuda 7200.10 series will come with 16MB and 8MB buffers.  Considering these two drives will be the best of breed for Seagate, it is fairly safe to assume these drives will have 16MB caches.

Seagate representatives have told us that the information posted was "very premature" and was not be posted on the website for several weeks.  Seek time information has not been released yet, which has traditionally been considered the problem area for perpendicular recording devices.  However, the 7200.10 datasheet claims all drives in the series will have a 4.16ms average latency time.

Several days ago Seagate announced its Cheetah 15K.5 series drives based on 15,000RPM platters. The Cheetah 15K.5 series also uses perpendicular recording to increase densities, but is solely limited to SCSI right now.  Pricing is not available yet on either the 15K.5 or 7200.10 series.  All Seagate hard drives come with 5-year warranties.


Comments     Threshold


This article is over a month old, voting and posting comments is disabled

RE: Platters
By coldpower27 on 4/21/2006 7:20:44 PM , Rating: 2

Well considering that the 500GB model is using the most advanced of Platter technology, 200Gb platters. Though the 400GB model is using older technology with 3 platters, but hwat is nice though is that 320GB model now which is finally limited to 2 platters.

It would be interesting though since the limit of 3.5inch HD is 5 platters and Segate now does indeed have 200GB platter technology, they can create a 5 platter 1TB drive if they do so desire, but Segate typically doesn't like to use that many platters.. Hitachi does though.

I cna't wiat for these drives hopefully they will bring down the price of older models.


RE: Platters
By coldpower27 on 4/21/2006 7:22:49 PM , Rating: 2
oops scrath my last post I was looking at wrong information...


RE: Platters
By coldpower27 on 4/21/2006 7:24:35 PM , Rating: 2
It now seems were maxing out at 188Gb per platter which is pretty impressive only a little bit further to get to 200gb per platter :P


RE: Platters
By mindless1 on 4/23/2006 10:14:50 PM , Rating: 2
Impressive or reckless, since having a greater margin between possible head discrimination and platter density should allow for fewer read problems/related failures. There are plenty of other potential failure areas though, but IMO, IF they're going to keep using mechanical drives, getting reliablity as high as possible should be at least as much (more, actually) of a priority than highest capacity. Truth is, the average user does not need 1TB HDDs. We that do are a small minority.


"And boy have we patented it!" -- Steve Jobs, Macworld 2007

Related Articles













botimage
Copyright 2014 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki