Print 13 comment(s) - last by akse.. on Nov 18 at 6:19 AM

(Click to enlarge)

(Click to enlarge)

S-band Antenna Support Assembly  (Source: NASA)
NASA's workhorse heads for the ISS

The International Space Station has been undergoing assembly in orbit for nearly eleven years. It was stalled due to delays caused from the tragic loss of the Space Shuttle Columbia and its crew, but is due to be completed by the end of 2011.

Despite being funded only through the end of 2015, there is widespread political support domestically and internationally to extend the ISS' operations through 2020 and beyond. However, the Space Shuttle fleet is due to be retired by the end of 2010, which would make unavailable large parts that are deliverable only by the Space Shuttle and its massive cargo bay.

In order to mitigate this problem, NASA has planned a series of flights that will deliver large-sized spare parts to the ISS, starting with yesterday's launch of the Space Shuttle Atlantis. There are nearly 30,000 pounds (13.6 tons) of parts and equipment that will be delivered during STS-129.

"In terms of being the flight that brings up all the spares for station, this is really full," said Bill Gerstenmaier, NASA's Director of Space Operations. "This flight, and a couple of the other shuttle flights that come later, really set us up very well for kind of the end of the shuttle servicing era."

Atlantis' payload bay is chock full of equipment and parts mounted on two cargo pallets, known as ExPRESS Logistics Carriers (ELCs).

ELC-1 contains an Ammonia Tank Assembly (ATA), a Battery Charge Discharge Unit (BCDU), a Space Station Remote Manipulator System (SSRMS) Latching End Effector (LEE) that will be used in the station's Canadarm2 robotic arm, a Control Moment Gyro (CMG), a Nitrogen Tank Assembly (NTA), a Pump Module (PM), a Plasma Contactor Unit (PCU), and two empty Passive Flight Releasable Attachment Mechanisms (PFRAMs) used for storage.

A box containing spare circuit breakers and a Canadian robot known as DEXTRE are mounted on the outside.

ELC-2 contains a High Pressure Gas Tank (HPGT), a Cargo Transport Container 1 (CTC-1) mounted to a Small Adapter Plate Assembly (SAPA), a Utility Transfer Assembly (UTA), an empty Payload PFRAM,and a Mobile Transporter/Trailing Umbilical System (MT/TUS) used in the Canadarm2. There is also an extra Control Moment Gyro, a Nitrogen Tank Assembly, and Pump Module. ELC-2 also contains flight equipment and MISSE-7.

The Materials International Space Station Experiment 7 (MISSE-7) is a test bed for
advanced materials and electronics that will be attached to the outside of the ISS. These
materials and electronics include solar cells, coatings, thermal protection, optics, sensors, and computing elements could be used in the next generation of satellites, space probes and launch systems.

There is also a spare S-band Antenna Support Assembly (SASA) that will be attached
to the sidewall inside the space shuttle payload bay. The SASA is an assembly that consists of the Assembly Contingency Radio Frequency Group, SASA Boom, and Avionics Wire Harness.  It is used to communicate with NASA's fleet of Tracking Data and Relay Satellites, which are used to ensure fast and reliable communications with Mission Control.

The two ELC pallets will be mounted on the left and right sides of the station's primary solar power truss. Connections will be made to the electrical grid of the ISS in order to power heaters and provide telemetry. The new oxygen tank will be attached to the station's airlock during one of the three spacewalks.

"It is establishing critical spares on board the International Space Station," commented  lead shuttle Flight Director Mike Sarafin. "We're going to warehouse parts that only the shuttle can deliver in large volume to the International Space Station for the pending retirement of the space shuttle, roughly a year from now".

There are five more Space Shuttle missions scheduled, the final three of which involve the delivery of more spare parts.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

Space Shuttle's Last Flight
By lightfoot on 11/17/2009 6:38:57 PM , Rating: 2
I think the last flight of the Space Shuttle should be to the ISS. They should pack as many scientists as possible into the cargo bay of the space shuttle and take them all to the ISS.

Then we can all just stand back and watch the science happen.

And if something blows up it doesn't really matter because it was the last flight.

To be especially cruel you could just leave them all up there on the ISS without a way back. That would motivate a shuttle replacement or space elevator to be built real quick. And all from spare parts and duct tape no less!

RE: Space Shuttle's Last Flight
By delphinus100 on 11/18/2009 3:36:41 AM , Rating: 2
"And if something blows up it doesn't really matter because it was the last flight."

I'm guessing that you don't plan to be the pilot...

"Nowadays, security guys break the Mac every single day. Every single day, they come out with a total exploit, your machine can be taken over totally. I dare anybody to do that once a month on the Windows machine." -- Bill Gates

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki