Print 13 comment(s) - last by akse.. on Nov 18 at 6:19 AM

(Click to enlarge)

(Click to enlarge)

S-band Antenna Support Assembly  (Source: NASA)
NASA's workhorse heads for the ISS

The International Space Station has been undergoing assembly in orbit for nearly eleven years. It was stalled due to delays caused from the tragic loss of the Space Shuttle Columbia and its crew, but is due to be completed by the end of 2011.

Despite being funded only through the end of 2015, there is widespread political support domestically and internationally to extend the ISS' operations through 2020 and beyond. However, the Space Shuttle fleet is due to be retired by the end of 2010, which would make unavailable large parts that are deliverable only by the Space Shuttle and its massive cargo bay.

In order to mitigate this problem, NASA has planned a series of flights that will deliver large-sized spare parts to the ISS, starting with yesterday's launch of the Space Shuttle Atlantis. There are nearly 30,000 pounds (13.6 tons) of parts and equipment that will be delivered during STS-129.

"In terms of being the flight that brings up all the spares for station, this is really full," said Bill Gerstenmaier, NASA's Director of Space Operations. "This flight, and a couple of the other shuttle flights that come later, really set us up very well for kind of the end of the shuttle servicing era."

Atlantis' payload bay is chock full of equipment and parts mounted on two cargo pallets, known as ExPRESS Logistics Carriers (ELCs).

ELC-1 contains an Ammonia Tank Assembly (ATA), a Battery Charge Discharge Unit (BCDU), a Space Station Remote Manipulator System (SSRMS) Latching End Effector (LEE) that will be used in the station's Canadarm2 robotic arm, a Control Moment Gyro (CMG), a Nitrogen Tank Assembly (NTA), a Pump Module (PM), a Plasma Contactor Unit (PCU), and two empty Passive Flight Releasable Attachment Mechanisms (PFRAMs) used for storage.

A box containing spare circuit breakers and a Canadian robot known as DEXTRE are mounted on the outside.

ELC-2 contains a High Pressure Gas Tank (HPGT), a Cargo Transport Container 1 (CTC-1) mounted to a Small Adapter Plate Assembly (SAPA), a Utility Transfer Assembly (UTA), an empty Payload PFRAM,and a Mobile Transporter/Trailing Umbilical System (MT/TUS) used in the Canadarm2. There is also an extra Control Moment Gyro, a Nitrogen Tank Assembly, and Pump Module. ELC-2 also contains flight equipment and MISSE-7.

The Materials International Space Station Experiment 7 (MISSE-7) is a test bed for
advanced materials and electronics that will be attached to the outside of the ISS. These
materials and electronics include solar cells, coatings, thermal protection, optics, sensors, and computing elements could be used in the next generation of satellites, space probes and launch systems.

There is also a spare S-band Antenna Support Assembly (SASA) that will be attached
to the sidewall inside the space shuttle payload bay. The SASA is an assembly that consists of the Assembly Contingency Radio Frequency Group, SASA Boom, and Avionics Wire Harness.  It is used to communicate with NASA's fleet of Tracking Data and Relay Satellites, which are used to ensure fast and reliable communications with Mission Control.

The two ELC pallets will be mounted on the left and right sides of the station's primary solar power truss. Connections will be made to the electrical grid of the ISS in order to power heaters and provide telemetry. The new oxygen tank will be attached to the station's airlock during one of the three spacewalks.

"It is establishing critical spares on board the International Space Station," commented  lead shuttle Flight Director Mike Sarafin. "We're going to warehouse parts that only the shuttle can deliver in large volume to the International Space Station for the pending retirement of the space shuttle, roughly a year from now".

There are five more Space Shuttle missions scheduled, the final three of which involve the delivery of more spare parts.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

"oversized" spares
By cliffyk on 11/17/2009 7:16:09 AM , Rating: 2
Silly headline, if they were "oversized" they would not fit in the shuttle...

RE: "oversized" spares
By Integral9 on 11/17/2009 9:04:55 AM , Rating: 3
Someone should have painted an "WIDE LOAD" sign on the back of the shuttle before launch.

What they heck, it's retiring. Let's have some fun with it.

RE: "oversized" spares
By juserbogus on 11/17/2009 2:15:44 PM , Rating: 2
fail... "oversized" does NOT mean can't fit... buy a dictionary.

RE: "oversized" spares
By mmatis on 11/17/2009 3:28:27 PM , Rating: 2
He doesn't get the "fail." You do. If it's oversized for the Shuttle, it won't fit in the Shuttle. If it's oversized for a Mini, it won't fit in a Mini. However it CAN be oversized for a Mini but fit in a Shuttle. YOU might want to buy that dictionary instead. Or at least don't use Olbermann's...

RE: "oversized" spares
By juserbogus on 11/17/2009 5:29:31 PM , Rating: 2
dude, just because you think you know how to use a word, that doesn't mean you do. "oversized" is a term used relative to the norm. it's perfectly proper to put 1000 lbs IN a mini and say "that is an oversized load"... and then watch it drive away. or how about 12 people in a boat with a seating capacity of 8...

and tell me, how in the world does your head connect this to Olbermann?

RE: "oversized" spares
By PrinceGaz on 11/17/2009 6:35:33 PM , Rating: 2
I was under the impression that "oversized" generally means larger than normal for that item, so the oversized spare parts would be just like the regular versions, just bigger.

Clearly oversized is not what those spare parts are, they are regular-sized versions of parts which are large to begin with.

RE: "oversized" spares
By akse on 11/18/2009 6:19:25 AM , Rating: 2
Yeah I also thought that they launched some stuff to ISS that were too big for it to install ;)

RE: "oversized" spares
By callmeroy on 11/17/2009 4:09:23 PM , Rating: 2
Nothing wrong with the wording, in the given context they are talking oversized in terms of payload capacity not physical size of the objects.

RE: "oversized" spares
By mindless1 on 11/17/2009 5:10:30 PM , Rating: 2
... oversized for a rocket, silly!

"Young lady, in this house we obey the laws of thermodynamics!" -- Homer Simpson

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki