Print 21 comment(s) - last by Reclaimer77.. on Oct 27 at 4:54 PM

160GB SSDs get faster, but only for 34nm drives

Microsoft's new Windows 7 operating system launched to great fanfare last week, but one of the most important features for Solid State Drive owners has been commonly overlooked. That feature is the the Trim attribute of the ATA Data Set Management Command, commonly known simply as TRIM.

SSDs are like traditional magnetic storage based hard drives in that data still resides on the drive after it has been deleted by the OS. That data block is overwritten by new data when the amount of fresh unused storage is depleted. On most SSDs, data is erased in 512KB blocks even though data is written in 4KB pages. This means that if a single 4KB page needs to be updated, the whole block must be erased and rewritten, slowing down the drive significantly. This is particularly true for random write operations.

TRIM synchronizes the operating system's view of deleted files with those that are deleted, but not yet erased on the hard drive. SSD controllers are good at managing data, but they have no optimization for different file systems. TRIM lets the controller know that data has been deleted so that it can wipe the entire block when it is not busy with other operations. This significantly speeds up write operations, especially when the drive is nearly full.

Intel's second generation X25-M series SSDs have been selling very well, and the company has been promising TRIM support to its many customers. It is releasing new firmware to the public that will enable the use of TRIM, but only with its latest generation of mainstream SSDs using 34nm NAND flash.

"Fast and reliable access to data is critical for our SSD users," said Pete Hazen, Director of Marketing for Intel's NAND Solutions Group. "The latest firmware and toolbox upgrade for Intel 34nm SSD users provide a host of new management, information and diagnostic tools to help SSDs retain out-of-box performance. We are encouraging our 34nm customers to download the new firmware update today. Not only will Windows 7 users receive the performance enhancements of the Trim command, but so will our Windows XP and Vista

Owners of second generation 160GB X25-M drives running Windows 7 will also see a 40 percent performance boost to sequential write speeds. The firmware update allows the drives to write data at up to 100MB per second.

Backing up data before the firmware update is highly recommended, but existing data on the SSD will not be erased. Intel also cautions against using the firmware utility over RAID, as each drive must be flashed individually. The firmware update is available here.

TRIM has been implemented in Linux 2.6.28 since December of last year. All older solid state drives will need firmware updates to enable TRIM support, otherwise the new command will be ignored by the controller.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Awesome
By HotFoot on 10/26/2009 1:19:45 PM , Rating: 2
Note the 80 GB drives aren't getting a boost to their sequential write speeds. The firmware update is taking advantage of the double number of chips in the 160 GB drive compared to the 80 GB drive to boost sequential speeds. I doubt you'll be disappointed though if you're putting those two 80 GB drives in RAID0. I have just one and compared to the Raptor it replaced, my system got so much snappier.

Off-topic but I also wanted to say that Vista users need not despair. TRIM functionality is available in the form of a software tool from Intel that you can schedule to run automatically to clean up the drive.

RE: Awesome
By jimhsu on 10/26/2009 1:48:25 PM , Rating: 2
Doesn't change the fact that for most users, the firmware update will actually boost realized write speeds even on the 80GB. Here's a test done with a reasonably fragmented drive (3.59 TB of writes according to Intel's tool):


After FW Update and one Wiper run:

RE: Awesome
By Reclaimer77 on 10/26/2009 4:39:15 PM , Rating: 2
Random reads and writes are FAR more important than sequential write speed anyway. Trust me, the 80gig screams !

"Well, we didn't have anyone in line that got shot waiting for our system." -- Nintendo of America Vice President Perrin Kaplan

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki