Print 48 comment(s) - last by mindless1.. on Jun 1 at 5:26 PM

The majority of the Tesla Roadsters currently delivered have been recalled for a suspension defect. Tesla blames Lotus, which assembles the cars in Britain.

Lotus has recalled 27 of the 2009 Lotus Exige (pictured here) and Elise for the same problem. The problem was first found by a Tesla driver complaining about poor handling.  (Source: AutoBlog)
Tesla is not happy with Lotus for mishandling its manufacturing

Tesla Motors has become, for the time being, the face of U.S. electric vehicles.  After making news with the release of its all-electric high-performance roadster, and more recently for its partnership with German automaker Daimler (owner of Mercedes-Benz), the young startup now has some less pleasant news to report.

The company is recalling 345 of its Roadster sports cars produced before April 22.  It wants to inspect their suspensions as it suspects that a "small percentage" of the Roadsters have improperly installed bolts in their rear chassis, possibly compromising the suspension.  Tesla blames automaker Lotus for the problems.  Lotus assembles the Roadsters in Britain, and then ships them to California for redistribution inside the U.S.

Tesla has said the problem does not affect the $109,000 USD car's powertrains and no accidents have been reported. 

Lotus is also negatively impacted by the problem, as apparently it made the same mistake on some of its sports cars.  According to the National Highway Traffic Safety Administration, it has issued a recall on 27 of its 2009 Elise and Exige vehicles.

The 345 returned Roadsters represent over two-thirds of the 500 units currently shipped.  The problem was actually found by one alert owner, who reported that their vehicle was experiencing "uncharacteristic handling."

To minimize inconvenience on customers, the company is looking to send technicians to their homes to make repairs, or to take the cars to a service shop nearby.  Greg Zanghi, Tesla's director of service and parts operations states, "We plan to do everything we can to address this matter swiftly and keep customers satisfied."

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Sad for Tesla
By superflex on 5/29/2009 3:46:54 PM , Rating: 0
Exactly my thoughts. Tesla ought to man up and accept the responsibility for selling a product which was flawed. Do they not perform QA/QC on their supplier parts?
I have zero respect for Tesla beginning with the delays in production, the layoffs and the govt handouts they receive.
They have and still are using DNC tactics of FUD.

RE: Sad for Tesla
By mindless1 on 5/29/2009 5:29:06 PM , Rating: 2
What in the world are you babbling about?

The only flaw appears to be a bolt in the assembly. Likely many cars on the road have a bolt or two loose, but they aren't put through the paces these cars are meant to handle.

It's not a "supplier part", it's assembly of the automobile. Yes QC would aim to find such flaws but do you honestly think they are expected to test the torque on every nut and bolt on the entire car after it is assembled (meaning an entire stripdown, some things just aren't accessible when the car is wholly built), meaning starting to unscrew it then rescrew and torque it again?

But wait, if it could have been improperly torqued the first time, what is the assurance it isn't improperly torqued the second time during QA testing?

Do you then put the car through a second stripdown to check whether the car was reassembled properly by the first QA team?

What then? Since it was yet again reassembled you give it to the 3rd QA team to check the prior team's work, then a 4th team to check the 3rd team's work and so on ad infinitum?

Of course not, you spot check such things then test the finished product, obviously the ones they checked did not have this handling problem or they would have found the fault.

Bottom line - Modern cars are complex pieces of machinery and people are not perfect. Mistakes get made in design and assembly on ALL cars, if they were perfect from the beginning then the last perfect car ever made would've been identical to the first one that rolled off the Model-T assembly line a century ago.

As for delays, layoffs, etc, an entire different topic that is out of context here except as a plug to support your lack of respect.

RE: Sad for Tesla
By Regs on 5/29/2009 6:41:05 PM , Rating: 1
Well, we can take it the other way as well. What if Tesla wanted to keep costs down as much as possible so they can sell the car to their targeted market and authorized Lotus to use a piece of machinery that was unworthy of adjusting the correct torque for these types of bolts or for these types of cars (different paneling, frames, different tolerances and so forth)? The circumstances could change very easily in either direction to be fair.

RE: Sad for Tesla
By mindless1 on 6/1/2009 5:26:25 PM , Rating: 2
A torque wrench isn't an especially complex tool, keeping costs down would mean buying one of high presumed quality and cost so it didn't wear out as fast nor cause assembly line downtime.

RE: Sad for Tesla
By brshoemak on 5/30/09, Rating: 0
“And I don't know why [Apple is] acting like it’s superior. I don't even get it. What are they trying to say?” -- Bill Gates on the Mac ads

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki