Print 65 comment(s) - last by icanhascpu.. on May 30 at 3:28 PM

JMicron seeks redemption with a new chip that could drive mainstream SSD adoption

DailyTech has learned that JMicron will be unveiling a new NAND flash controller for use in Solid State Drives (SSDs) in the near future. The JMF612 chip uses an ARM9 core in a 289-ball TFBGA package, and will support the use of up to 256MB of DDR or DDR2 DRAM as an external cache.

The new chip was designed to remedy stuttering problems during random write operations, which has plagued SSDs using the JMF602 flash controller. JMicron rushed out a JMF602B chip to address shortcomings, but was only partially successful. Several firms decided to combine two JMF602B chips and an internal RAID chip from JMicron to boost performance. Although it raised costs significantly, it was still cheaper than controllers from Samsung and Indilinx, which were not yet available at the time. It was for this reason that SSDs like OCZ's Apex and G.Skill's Titan series were born.

The JMF612 chip is designed especially for a new generation of NAND flash chips built using smaller process geometries that will be entering the market soon. The new flash chips will be smaller, faster, and cheaper to manufacture. IM Flash Technologies, a joint venture between Intel and Micron, is already building 34nm NAND, while 32nm NAND from Samsung and Toshiba will soon be entering production. The use of a cheap single-chip controller and new higher density flash chips could cut prices in half by the vital Christmas shopping season.

SSDs using the chip will also be able to support Native Command Queuing (NCQ), which was designed to increase performance of SATA hard disks by allowing the drive to internally optimize the order in which read and write commands are executed. NCQ is used in SSDs when there is latency due to high CPU usage. It also supports 128-bit Advanced Encryption Standard (AES) protocols for full disk encryption. This provides data security mandated for classified and/or privileged information in government and corporations.

While most drives using the new chip will be designed for its SATA II interface in mind, it does have a USB 2.0 interface for data transfers and firmware updates. The JMF612 has an ARM9 embedded processor with 32KB of ROM and 128KB of RAM at its core. Data integrity is provided by BCH ECC in hardware, with the ability to correct up to 24 random bit errors per 1024 bytes. Dynamic and static wear leveling technologies, along with updated bad block management software help to ensure long life of the drive.

The first terabyte SSDs on the market could end up using this controller chip. It uses eight memory channels to access its storage quickly and without lag.

JMicron will be showing engineering samples of its latest controller at Computex 2009 at the beginning of June. Mass production of the new chip is expected to start in July. The company is also working on a flash controller that will work at SATA 6Gbps speeds, but it is not expected to be ready for mass production until the middle of 2010.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: To the doubters out there
By icanhascpu on 5/30/2009 3:25:55 PM , Rating: 2
Come on guys, I thought DailyTech commenter were a little smarter than this.

I doubt the cost of making a optical disk will ever be more than making a flash ThumbDrive either. Here is the thing with that; there is more to a company trying to distribute media than just that. If you want to make a arguement in your favor that makes any sort of real world sense you have to account for much more than preschool logic.

1. Flash is rewritable.
Media distributes like NetFlix could do a number of things with that simple fact. New movie coming out? Start replacing low-demand FlashDrives with high demand ones simply by writeing over. You just doubled the worth of the drive. Or halved the production cost of it. Do that a few times and the actual cost of the drive is ALOT lower than you have convinced yourself it is.
2. Resilience
Flash is much much tougher then optical media. How many DVD/HD do you think places like Netflix or Blockbuster have to replace per day? I would say a single optical dist will last a maximum of ten(10) people before it starts getting its first movbie-skipping scratches AT BEST. At that point its pretty much worthless to a company that wants to pride itself on quality assurance. A flash drive will almost certainly last several times as long. Once again extending the actual cost of manufacturing much lower than some might think.
3. Flexibility and Encryption
Flash drives will undoubtedly skyrocket in terms of space as the processes that create them get ever lower. 1TB will not be uncommon in the next 5 years. Thats not exactly a long time. Thats not even enough time for blueray to be replaced. The fact that you can fit several movies/whatever and encrypt it, and link decryption to an account as you, say, rent a custom FlashDrive with 10 1080p movies on it, rented all together, or as a package deal (whatever). The point of that is, you have 1 FlashDrive vs. 10 optical disks. 10 Disks that have a 10times greater possibility to get scratched. Once again, that drives the actual cost of creating a flashdrive vs. optical divided by 10 in that case alone.

So no. No way in HELL will optical media be less to manufacture IF YOU INTENT ON ACTUALLY USING THEM.

"This is from the It's a science website." -- Rush Limbaugh

Most Popular ArticlesSmartphone Screen Protectors – What To Look For
September 21, 2016, 9:33 AM
UN Meeting to Tackle Antimicrobial Resistance
September 21, 2016, 9:52 AM
Walmart may get "Robot Shopping Carts?"
September 17, 2016, 6:01 AM
5 Cases for iPhone 7 and 7 iPhone Plus
September 18, 2016, 10:08 AM
Update: Problem-Free Galaxy Note7s CPSC Approved
September 22, 2016, 5:30 AM

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki