Print 29 comment(s) - last by AvidDailyTechi.. on Feb 16 at 8:59 AM

50nm lowers cost and power consumption

New 50nm DDR3 DIMMs from Samsung and Elpida are entering mass production this month. The chips will feature higher densities and speeds while lowering latencies, power consumption, and costs.

Elpida's new 50nm process uses 193nm argon fluoride immersion lithography combined with copper interconnect technology, providing a 25 percent speed boost over standard aluminum interconnects. A standard chip size of less than 40mm2 means that there will be more dies produced per wafer, lowering costs once the line matures and yields are maximized.

The new chips are capable of 2.5Gb/s at a standard 1.5v, but can also be used at 1.2v up to 1.6Gb/s. Initial production will be at 1Gb densities. This enables new usage models in the mobile and server application space.

Corsair's Dominator GT 2GHz CL7 DDR3 DIMMs were shown at CES, and they may enter production this month using Elpida's latest.

Meanwhile, the world's only profitable DRAM producer is not standing still.

Samsung's own 50nm process is being used to manufacture 2Gb DDR3, and is expected to become Samsung's primary DRAM process technology this year. They claim a 60% increase in productivity over their DDR2 equivalents.

Qimonda taped out its 46nm DDR3 Buried Wordline technology in November, ahead of their internal schedule. They hope to start mass production by mid 2009.

Many other DDR3 producers are also looking to lower geometries in preparation for AMD's AM3 socket launch and Intel's Lynnfield launch, both of which will use DDR3 and accelerate market demand.

The price premium of DDR3 could drop from 100% to 10% by the time Lynnfield and Windows 7 launch together in Q3. Intel will be using DDR3 exclusively on its 32nm Westmere CPUs.

Due to a massive glut of DDR2 chips, there are almost no plans to upgrade factories to 50nm for DDR2. Instead, they will transition to surplus 65nm and 70nm equipment currently used for DDR3.

According to International Data Corporation, an IT market research firm, DDR3 sales will account for 29 percent of the total DRAM market by units sold in 2009. This will grow to 72 percent in 2011.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: Faster memory? Meh...
By onelittleindian on 1/20/2009 10:42:15 AM , Rating: 2
You're confused. A 4 core chip isn't bandwidth limited (as the article says). An 8 or 16 core chip is.

We'll need this faster memory when the 8-core cpus come out next year.

RE: Faster memory? Meh...
By B3an on 1/20/2009 10:30:27 PM , Rating: 2
I agree with you.

I've also found something interesting with my i7 platform and fast DDR3. If i disabled the HDD page file in Vista, so that a game uses my RAM instead of the HDD when i run out of graphics memory, then the DDR3 is sometimes fast enough to keep playable frame rates, where as with the HDD i get single digit FPS.

Take GTA4 for instance, that game needs 1.6GB graphics RAM @ 2560x1600 wth full settings - this isn't even with AA, while i have GTX 295 (896MB usable). GTA4 will actually run perfectly fine at these settings with HDD paging disabled... but if i enabled HDD paging, the game becomes completely unplayable.
With most games though DDR3 still is not fast enough, but remains a big improvement over the HDD still. So i welcome faster memory.

"There is a single light of science, and to brighten it anywhere is to brighten it everywhere." -- Isaac Asimov
Related Articles

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki