Print 86 comment(s) - last by Gestahl.. on Jan 14 at 3:24 AM

European Space Agency engineer Age-Raymond Riice as developed a remarkably simple way to propel a space elevator upward with a series of rhythmic jerks.  (Source: BBC)
A new method could help realize dreams of a space elevator

A space elevator has been a long standing dream of many in the science and tech community.  Conceived by Russian scientist Konstantin Tsiolkovsky in 1895 and popularized by author Arthur C. Clarke, many believe the idea holds a great deal of real world promise, and may eventually provide the cheapest way to transport people and goods into space.  With many countries such as Japan, the ESA, and the U.S. finally getting serious in a race to become the first nation to develop a space elevator, enthusiasm is at a high.

Unfortunately, though, much of the materials and methods needed to build such an elevator are infeasible.  While carbon nanotubes could allow for a cable strong enough to hold a space elevator in theory, one key problem is how to propel the elevator along the cables into space.

Among the previously suggested methods of powering the climber into space were beaming microwave or laser power, or even concentrated solar power to the climber; but all these efforts have a long ways to go before being close to being feasible.

However, a remarkably simple idea proposed at the Second International Conference on Space Elevator and Tether Design in Luxembourg could hold the key to powering the space elevator.  European Space Agency ground station engineer Age-Raymond Riise showcased a remarkably simple propulsion method which uses a series of rhythmic jerks to propel a device upwards along a taut cable.

For his demo he tied brushes with their bristles pointing down, representing the elevator cabs around the broom stick, representing the elevator cable.  As the brushes pointed downward, they required less force to slide up than to slide down.  The assembly slid up and down along the broomstick, but experienced a net upwards motion, slowly climbing to the top of the broomstick.

The novel new method holds great promise as similar jerking motion could be applied to raise the elevator on a full-sized design, in theory.  The key technical challenge would be designing a cable strong enough to withstand the heat and forces exerted on it by the atmosphere. 

However, advocates argue that with payload costs still remarkably high, the financial and social incentives for building a space elevator are enormous.

Building a space elevator could enable novel new industries.  Describes Benoit Michel of the Catholic University of Leuven, a conference attendee, "From my point of view, the space elevator project is important because it enables a far more directly useful project - installation of large space solar power satellites around the Earth to provide continuous, cheap, CO2-neutral, environmentally friendly energy.  I firmly believe that the next century will have a large space-based industry and that industry will be the main energy provider for the whole mankind."

Mr. Riise has been approached by commercial aerospace terms about his idea and is in talks with them over terms.

Comments     Threshold

This article is over a month old, voting and posting comments is disabled

RE: A bit misleading
By mcnabney on 1/6/2009 8:54:19 PM , Rating: 3
There are two great challenges to the space elevator.

1. The cable. Even if the silly thing could be made, could you imagine how it could be conceivably put in place?

2. The counterweight. There is a great lack of million ton chunks of something in geosynchronous orbit. That means we have to launch it in pieces by rocket (at $10k a pound we are going way over the planets annual GDP) or find some way to wrangle an asteroid. Do you trust NASA to bring what could be a planet-killer close to Earth?

I don't see either of those tasks being accomplished until we enter a new age of technology.

RE: A bit misleading
By masher2 on 1/6/2009 10:21:09 PM , Rating: 3
> "Even if the silly thing could be made, could you imagine how it could be conceivably put in place?"

Put a cable factor in geostationary orbit; drop down an ultrathin fiber. Use that fiber to pull down sucessfully thicker strands.

> "There is a great lack of million ton chunks of something in geosynchronous orbit. "

If the cable is extended an equal distance past geosych, it obviates the need for a counterweight entirely. Furthermore, the counterweight could easily start small and all but the intial seed be driven up the cable itself, meaning it wouldn't need to be launched by rocket.

Finally, even a million-ton asteroid is far from a "planet killer". Those are more in the trillion (a million million) ton range.

RE: A bit misleading
By wordsworm on 1/7/2009 4:16:03 AM , Rating: 2
If the cable is extended an equal distance past geosych

I don't think you'd need an equal length past geo-synch. The distance past geo-synch. I believe that we're looking at exponential rather than linear. We're talking a centrifugal force. I don't really understand wiki's article on it, and my likely erroneous guess is that the equation would be F=d/dt(mv), which is complicated by the decay of F as the object gets further away from the gravitational effect of the earth.

Are there any physics experts here that can give a rough calculation on a kg?

In any case, I took a look around for some information, and didn't really find anything that helped me. However, another website asked the question, "What would happen if the orbital tower snapped? Bloody good question. I can't even begin to guess what kind of damage it would do. I think it's a good enough question that might make people stop laughing at the idea of an orbital tower.

RE: A bit misleading
By EODetroit on 1/7/2009 10:11:51 AM , Rating: 2
Anyone do the math on what happens if the cable snaps, maybe even altering the altitude of the break for the worst case scenario? Would the "top floor" be tossed out of earth orbit (a death sentence for the people on board), for example, or would it naturally settle into a higher orbit that is presumably recoverable?

RE: A bit misleading
By EODetroit on 1/7/2009 10:13:03 AM , Rating: 2
LOL jeez its in the post directly above this... I just didn't read quite far enough.

RE: A bit misleading
By masher2 on 1/7/2009 10:25:35 AM , Rating: 3
I don't really understand wiki's article on it, and my likely erroneous guess is that the equation would be F=d/dt(mv), which is complicated by the decay of F as the object gets further away from the gravitational effect of the earth.
You need a bit of basic calculus to do the equation. You combine an expression for the mass of the cable at any point (which would be a constant for a linear cable, but in reality would taper at both ends) with the expression for gravitity at a given point (GM/r^2), and the term for centripedal acceleration

Then, you integrate over the range from altitude 6,000 (earth's surface) to 42,000 (geosynch), and equate that to whatever range of integral gives you the same value from 42,000 to x, x being the length of your cable past geosynch.

You can do it in a single step by just requiring the total force on the cable to be zero, and finding the appropriate rnage of integration, but it may be a little easier to understand in the two-step process I outlined above.

To be truly accurate, you need to take in additional terms such as atmospheric drag, the fact the earth is actually an oblate spheroid, etc, etc.

RE: A bit misleading
By Cerberus90 on 1/12/2009 4:59:01 PM , Rating: 2
Thats not how they'd do it, you get a really long reel of the carbon nanotube cable, and attach one end to a rocket, and have that tow it into space.

:D :D :D

"We’re Apple. We don’t wear suits. We don’t even own suits." -- Apple CEO Steve Jobs
Related Articles

Most Popular Articles5 Cases for iPhone 7 and 7 iPhone Plus
September 18, 2016, 10:08 AM
Laptop or Tablet - Which Do You Prefer?
September 20, 2016, 6:32 AM
Update: Samsung Exchange Program Now in Progress
September 20, 2016, 5:30 AM
Smartphone Screen Protectors – What To Look For
September 21, 2016, 9:33 AM
Walmart may get "Robot Shopping Carts?"
September 17, 2016, 6:01 AM

Copyright 2016 DailyTech LLC. - RSS Feed | Advertise | About Us | Ethics | FAQ | Terms, Conditions & Privacy Information | Kristopher Kubicki